Contribution of Invariant Natural Killer T Cells to the Clearance of Pseudomonas aeruginosa from Skin Wounds

Chronic infections are considered one of the most severe problems in skin wounds, and bacteria are present in over 90% of chronic wounds. Pseudomonas aeruginosa is frequently isolated from chronic wounds and is thought to be a cause of delayed wound healing. Invariant natural killer T (iNKT) cells, unique lymphocytes with a potent regulatory ability in various inflammatory responses, accelerate the wound healing process. In the present study, we investigated the contribution of iNKT cells in the host defense against P. aeruginosa inoculation at the wound sites. We analyzed the re-epithelialization, bacterial load, accumulation of leukocytes, and production of cytokines and antimicrobial peptides. In iNKT cell–deficient (Jα18KO) mice, re-epithelialization was significantly decreased, and the number of live colonies was significantly increased, when compared with those in wild-type (WT) mice on day 7. IL-17A, and IL-22 production was significantly lower in Jα18KO mice than in WT mice on day 5. Furthermore, the administration of α-galactosylceramide (α-GalCer), a specific activator of iNKT cells, led to enhanced host protection, as shown by reduced bacterial load, and to increased production of IL-22, IL-23, and S100A9 compared that of with WT mice. These results suggest that iNKT cells promote P. aeruginosa clearance during skin wound healing.     

Construction of Cellulose Binding Domain Fusion FMN-Dependent NADH-Azoreductase and Glucose 1-Dehydrogenase for the Development of Flow Injection Analysis with Fusion Enzymes Immobilized on Cellulose

The cellulose binding domain (CBD) of cellulosome-integrating protein A from Clostridium thermocellum NBRC 103400 was genetically fused to FMN-dependent NADH-azoreductase (AZR) and glucose 1-dehydrogenase (GDH) from Bacillus subtilis. The fusion enzymes, AZR-CBD and CBD-GDH, were expressed in Escherichia coli Rosetta-gami B (DE3). The enzymes were purified from cell-free extracts, and the specific activity of AZR-CBD was 15.1 U/mg and that of CBD-GDH was 22.6 U/mg. AZR-CBD and CBD-GDH bound strongly to 0.5 % swollen cellulose at approximately 95 and 98 % of the initial protein amounts, respectively. After immobilization onto the swollen cellulose, AZR-CBD and CBD-GDH retained their catalytic activity. Both enzymes bound weakly to 0.5 % microcrystalline cellulose, but the addition of a high concentration of microcrystalline cellulose (10 %) improved the binding rate of both enzymes. A reactor for flow injection analysis was filled with microcrystalline cellulose-immobilized AZR-CBD and CBD-GDH. This flow injection analysis system was successfully applied for the determination of glucose, and a linear calibration curve was observed in the range of approximately 0.16–2.5 mM glucose, with a correlation coefficient, r, of 0.998.     

Generation mechanism and prevention method of secondary molybdate phase during vitrification of PUREX wastes in liquid-fed ceramic melter

ABSTRACT

In order to develop a glass production method that inhibits formation of the Mo-bearing secondary phase, the so-called yellow phase (YP), and also to clarify its formation behavior, vitrification tests using a small-scale liquid-fed ceramic melter (LFCM) were conducted. Chemically simulated PUREX liquid waste containing Na, Mo and other fission elements was fed into a molten glass pool in the melter together with several sizes of feed glass. When the glass beads with a diameter of around 2 mm were fed, some YP was contained in the vitrified glass products at 25 wt% waste loading. While, almost no YP was detected in the glass products when glass powder with a diameter of less than 63 μm was used. The microscopic analysis of the cold-cap samples revealed that powderization of the feed glass contributed to the facilitation of Na dissolution to the feed glass in the cold-cap. This quick intake of Na to the feed glass prevented the formation of liquid Na₂MoO₄ aggregation and provided homogeneous Mo dispersion in the cold-cap with forms of alkali earth and/or rare earth molybdates. The homogeneous dispersion of Mo resulted in the fast and complete dissolution of Mo in the glass melt.     

Development of RF magnetron sputtering method to fabricate PZT thin film actuator

PZT piezoelectric very thin films suitable for a microactuator have been deposited onto Invar alloy substrate using a high-temperature RF magnetron sputtering technique. PZT thin films must be deposited onto conductive substrate for a monomorph or a bimorph actuator. The chemical composition and the crystalline structure of these films were measured by ESCA and XRD, respectively. The chemical composition of PZT deposited stoichiometrically was almost the same as commercially-produced bulk PZT. Crystal planes (1 1 0) and (1 1 1) of PZT perovskite structure were observed in XRD analysis. When the substrate was heated to above 600 °C, SEM revealed only a very small number of pinholes on the surface. A thin (500 nm) film actuator has been characterized by measuring the piezoelectric property using a Laser Doppler Vibrograph. It was confirmed that the piezoelectric property has a linear relationship with the grain size, which also increased with the substrate temperature. The piezoelectric property of deposited PZT thin films showed a good agreement with a quoted value of bulk PZT, when the substrates were heated to 600 °C.     

Peak assignments of ELNES and XANES using overlap population diagrams

The usefulness of overlap population (OP) diagrams for peak assignments of an electron energy loss near-edge structure (ELNES) and an X-ray absorption near-edge structure (XANES) is demonstrated. Mg-K, L(2,3), and O-K edges of MgO are taken as examples. Theoretical calculations are performed using a first-principles orthogonalized linear combination of atomic orbitals (OLCAO) method. A core-hole is included explicitly, and a large supercell is used to minimize artificial interactions among the core-holes in adjacent cells. All experimental spectra are quantitatively reproduced by the calculations. The OP diagrams for a selected pair of atomic orbitals are computed in order to provide proper assignments for each peak in ELNES and XANES. They are interpreted in terms of interactions among Mg-Mg and Mg-O bonds. Results are found to be consistent to our previous conclusion, which was obtained using a cluster method [T. Mizoguchi, et al., Phys. Rev. B 61 (2000) 2180]. The powerful combination of the OP diagram and a high-energy resolution ELNES to obtain fine electronic structures is also demonstrated.     

Metal-Coated <100>-Cut GaAs Coupled to Tapered Parallel-Plate Waveguide for Cherenkov-Phase-Matched Terahertz Detection: Influence of Crystal Thickness

The influence of crystal thickness of metal-coated <100>-cut GaAs (M-G-M) on Cherenkov-phase-matched terahertz (THz) pulse detection was studied. The M-G-M detectors were utilized in conjunction with a metallic tapered parallel-plate waveguide (TPPWG). Polarization-sensitive measurements were carried out to exemplify the efficacy of GaAs in detecting transverse magnetic (TM)- and transverse electric (TE)-polarized THz waves. The reduction of GaAs’ thickness increased the THz amplitude spectra of the detected TM-polarized THz electro-optic (EO) signal due to enhanced electric field associated with a more tightly-focused and well-concentrated THz radiation on the thinner M-G-M. The higher-fluence THz beam coupled to the thinner M-G-M improved the integrated intensity of the detected THz amplitude spectrum. This trend was not observed for TE-polarized THz waves, wherein the integrated intensities were almost comparable. Nevertheless, good agreement of spectral line shapes of the superposed TM- and TE-polarized THz-EO signals with that of elliptically polarized THz-EO signal demonstrates excellent polarization-resolved detection capabilities of M-G-M via Cherenkov-phase-matched EO sampling technique.     

Closest-point projection method for the extended subloading surface model

This paper presents an implicit integration scheme based on the closest-point projection method for an unconventional plasticity model, the extended subloading surface model. A cutting-plane algorithm has already been formulated for the model. However, the present paper aims to introduce an alternative closest-projection return mapping scheme for resolving the elasto-plastic problem by improving the accuracy of the similarity center variable. Numerical examples are examined for monotonic and cyclic loading conditions to validate the results against a forward Euler method. The speed and accuracy of the resolution technique are determined, showing the local and global convergence rates and the iso-error map for the numerical algorithm.     

Generation of Effective Field Gradient and Spin Current by a Flow of Liquid Helium-3

Journal of Low Temperature Physics - The coupling of spin angular momentum and mechanical rotation is utilized for generating a spin current of nuclear spins of the liquid helium-3. A hydrodynamic...     

Synthesis and Sintering of Cerium(II) Monosulfide

Cerium monosulfide (CeS) powder was synthesized by the reduction of Ce₂S₃ powder with metallic Ce, which was obtained from ceria (CeO₂) powder using carbon disulfide (CS₂) gas. To obtain the maximum amount of CeS from a mixture of Ce₂S₃ and Ce, an excess amount of metallic Ce, a stoichiometric composition, was necessary in the synthesis at 1273 K for 10.8 ks. The preliminary sintering experiments also were performed using a synthetic CeS powder containing a small amount of Ce, Ce₂O₂S, and β-Ce₂S₃ as impurities. It was found that the oxygen content in the sintered compact decreases gradually as the sintering temperature increases, because of the removal of the impurities due to the evaporation of the volatile CeO. Single-phase CeS was formed by sintering at 2173 K. To evaluate the activation energy for densification of single-phase CeS, a CeS powder was prepared by milling an initial sintered compact and was used as an ingredient for hot-press experiments. Densification data during hot-press sintering were analyzed using a kinetic equation, showing that boundary diffusion is a rate-limiting process. The results suggest that this boundary diffusion model can explain well the densification data, with an apparent activation energy of 479 kJ·mol^-1.