Chiral lewis acid-catalyzed enantioselective michael reactions in water

Asymmetric Michael reactions of ß-ketoesters with enones were effectively catalyzed by complexes of silver salts and BINAP derivatives in water. The reactions have proved to give Michael adducts in high yields with high enantioselectivities. These reactions are the first example of Lewis acid-catalyzed asymmetric Michael reactions in water.     

Superplastic behaviour of Ti-48at.%Al two-phase titanium aluminide compacts made from mechanically alloyed powder

An HIP compact of MA-processed powder having a nominal composition of Ti-48at.% Al was produced. The compact consisted of a large amount of TiAl(λ) and a small amount of Ti₃Al (₂), in a completely ultra-fine equiaxed grain structure. This two-phase compact showed typical superplastic deformation behaviour. A maximum elongation of 550% was obtained. A strain exponent, n = 2, and grain size exponent, p = 2, were determined from the results of a strain-rate-change test and a creep test at constant initial stress using samples having various grain sizes, respectively. The activation energy for creep, Q_c at constant stress was calculated to be 350 kJ/mole. It is concluded that the superplastic deformation mechanism of the material under study is grain boundary sliding controlled by lattice diffusion in the TiAl phase.     

Electrospray Deposition of Photoresist: A Low Impact Method for the Fabrication of Multilayered Films

Electrospray deposition has been investigated as a substitute for photoresist spin coating. The morphology of Microposit S1813 photoresist films has been studied as a function of several spray conditions including resist concentration, substrate surface, and flow rate. Film morphology is controlled by three process parameters: the surface energy determines the equilibrium conditions of resist on the substrate; the viscosity and volume flux determine the relaxation time for the depositing resist solution after impact on the substrate. Electrosprayed photoresist films have been used for photolithographic patterning and it has been demonstrated that electrospray deposition is an effective method for deposition of photoresist on top of fragile, thin films, which can be used for multilayered thin film fabrication.

     

GBLT-VG for High User Densities by User Group Behavior and Hot Point in MMO Virtual Environment

Massively Multiplayer Online (MMO) games have large-scale virtual environments. Here, we propose a load distribution technique called the Group Based Load-distribution Technique with Virtual Group (GBLT-VG) that utilizes Peer-to-Peer (P2P) communication to maintain scalability under high user density conditions in MMO virtual environments. A common problem of P2P virtual environments is that user group behavior frequently generates high user density conditions. Existing techniques to manage the virtual environment cannot maintain performance in such high user density situations. The proposed technique, GBLT-VG, reduces area management loads of manager peers by introducing a new manager who manages a user neighbor group. GBLT-VG forms the user neighbor group efficiently by using party function under high user density conditions caused by users?? cooperative behaviors. In addition, GBLT-VG reduce the management load by using a virtual group when a number of parties is small, thereby decreasing the existing managers?? loads dynamically. This paper also presents simulation results demonstrating how GBLT-VG can reduce the average number of users managed by the server.     

Current reliability issues and future technologies for systems on silicon – processes, circuits, chip architecture, and design

The progress of silicon technology is opening the era of “systems on silicon” in which a large-scale memory, a CPU, and other logic macros will be integrated on a single chip. These kinds of chips, called system LSIs, have an especially promising future in mobile and multimedia applications but face inherent technical problems related to the reliability of ultrathin oxide film, conflict in the processing of different components, increased gate and subthreshold leakage currents, memory bottlenecks, and design complexity. This paper reviews the system LSIs and then introduces related technologies in processing, circuits, chip architecture, and design. It also discusses the influence of the system LSIs on business strategies.     

Characterisation of volatile sulphur-containing compounds generated in crushed leaves of Chinese chive (Allium tuberosum Rottler)

To characterise the composition of sulphur-containing constituents in Chinese chive (Allium tuberosum Rottler), GC–MS and HPLC analyses were carried out, using 12 varieties of Chinese origin, 4 varieties of Japanese origin and 6 commercially available cultivars. Five disulphides (dimethyl, allyl methyl, methyl 1-(E)-propenyl, diallyl, and allyl 1-(E)-propenyl), two trisulphides (dimethyl and allyl methyl), and two vinyldithiins (3-vinyl-[4H]-1,2- and 2-vinyl-[4H]-1,3-) were identified on the basis of their mass spectral and GC-retention data. Among the detected sulphur compounds, sulphides with a methyl group predominated over those with an allyl group. This was supported by the HPLC estimations, suggesting that all cultivars examined had much greater amounts of methiin than alliin. Also, two novel compounds were tentatively identified as [3H,4H]-1,2-dithiin and [2H,4H]-1,3-dithiin on the basis of their mass spectral features, GC-retention data, and some experimental results on their formation in reaction mixtures with different proportions of methiin and alliin. Their formation mechanism was proposed.     

An outcome of nuclear safety research in JAERI: case study for LOCA

An outcome of nuclear safety research (NSR) done by JAERI (Japan Atomic Energy Research Institute) was case studied by the bibliometric method. (1) For LOCA (loss-of-coolant accident) a domestic share of JAERI in monoclinic research paper was 63% at the past (20) 1978–1982 but was decreased to 40% at the present 1998–2002. For co-authored papers a domestic share between JAERI and PS (public sectors) was zero at past (20) but increased to 4% at the present. Research cooperation is active between Tokyo University and JAERI or between JAERI and Nagoya University. (2) It is revealed that LOCA outputs born by NSR-JAERI reflected partly to those of the Safety Licensing Guidelines, however, a share of NSR-JAERI could not determined due to the lack of necessary information in the Guideline.     

Optical rotation sensing by the geometric effect of fiber-loop twisting

An optical technique for sensing a rotation angle is described and experimental results are presented. When a loop of an ideal fiber that exerts no linear birefringence is deformed into a nonplanar curve, the azimuth angle of linearly polarized light propagated in the fiber is rotated. The technique is based on this effect of geometric polarization rotation in an optical fiber. A twisted single-mode fiber is substituted for the ideal fiber. Experimental results include studies of polarization rotation and variations of light propagated in a loop of a twisted single-mode fiber under deformation.     

A novel MOSFET with vertical signal‐transfer capability for 3D‐structured CMOS image sensors

We have developed a novel MOSFET that can transfer signals vertically without through‐silicon vias but by using a fully depleted silicon‐on‐insulator (FDSOI) structure with its source region connected to the back electrodes as well as the front ones. A prototype MOSFET fabricated using the backside anisotropic wet etching technique has confirmed that the electrical characteristics measured from the front and the back electrodes are identical. The subthreshold factor S of the prototype was found to be 64.5 mV/decade, suggesting a good switching performance. Since the double‐sided MOSFET has vertical signal‐transfer capability and excellent operating characteristics, it is expected to contribute to developing a More‐than‐Moore type device of three‐dimensional integration such as pixel‐parallel image sensors. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Field instrument for simultaneous large dynamic range measurement of atmospheric hydrogen sulfide, methanethiol, and sulfur dioxide

We describe a membrane-based collection/analysis system that differentially monitors H2S and CH3SH, and to which a conductometric SO2 analyzer using the same collector was coupled. A diffusion scrubber (DS) comprised of a Nafion tube collects H2S selectively while a porous polytetrafluoroethylene (pPTFE) DS collects both H2S and CH3SH. Both gases are measured via their ability to react with fluorescein mercuric acetate (FMA) which results in decreased fluorescence. The limited dynamic range of a negative signal procedure was overcome by using dual DS units comprised of short and long scrubbers, placed serially in the liquid flow line. Different DS designs and membrane materials were investigated. H2S, CH3SH, and SO2 from a biogenic point source were continuously measured, and the H2S/CH3SH data compared well with a standard procedure involving Tedlar bag collection, preconcentration and thermal desorption from a Tenax trap, and measurement by gas chromatography/flame photometric detection. Walkaround portability of the instrument and very large dynamic range measurement of H2S and SO2 were demonstrated around the Mt. Aso volcano.