ε-Entropy and Fractal Dimension of a State for a Gaussian Measure

Kolmogorov introduced the concept of -entropy to analyze information in classical continuous systems. The fractal dimension of a geometric set was introduced by Mandelbrot as a new criterion to analyze the geometric complexity of the set. The -entropy and the fractal dimension of a state in a general quantum system were introduced by one of the present authors (MO) in order to characterize chaotic properties of general states.In this paper, we show that -entropy of a state includes Kolmogorov's -entropy, and that the fractal dimension of a state describes fractal structure of Gaussian measures.     

Sub-millimeter-long carbon nanotubes repeatedly grown on and separated from ceramic beads in a single fluidized bed reactor

A semi-continuous fluidized-bed process is reported which rapidly converts acetylene into carbon nanotubes (CNTs). Catalysts are first immobilized on ceramic beads and CNTs are then grown on the beads and then separated from them in a repetitive process accomplished within a single reactor simply by switching gases at a fixed temperature. CNTs of 6–10 nm diameter, three walls on average, 0.4 mm length and 99 wt.% purity were synthesized at an yield of over 70% in a reactor residence time shorter than 0.3 s. The easy and efficient production of such CNTs with in situ separation from the catalysts may accelerate the development of CNT-based nanotechnology industries.     

Proposal of Design Criteria for Gas Entrainment from Vortex Dimples Based on a Computational Fluid Dynamics Method

Design criteria for gas entrainments (GE) from the liquid surface in a fast breeder reactor system were proposed in this paper for the two types of GE phenomena from a vortex dimple based on a computational fluid dynamics (CFD) method. The first gas entrainment phenomenon is a gas core extension directly to the outlet piping level, which induces large amount of GE to the flow system. The second is continuous bubble detachments from the tip of the vortex dimple. Based on CFD calculations for elemental experiments of the surface vortex, local CFD non-dimensional numbers were defined as the design criteria to prevent GE. In conclusion, it was found that the CFD non-dimensional numbers are useful for the design parameters of GE prevention.     

Chiral lewis acid-catalyzed enantioselective michael reactions in water

Asymmetric Michael reactions of ß-ketoesters with enones were effectively catalyzed by complexes of silver salts and BINAP derivatives in water. The reactions have proved to give Michael adducts in high yields with high enantioselectivities. These reactions are the first example of Lewis acid-catalyzed asymmetric Michael reactions in water.     

Electrospray Deposition of Photoresist: A Low Impact Method for the Fabrication of Multilayered Films

Electrospray deposition has been investigated as a substitute for photoresist spin coating. The morphology of Microposit S1813 photoresist films has been studied as a function of several spray conditions including resist concentration, substrate surface, and flow rate. Film morphology is controlled by three process parameters: the surface energy determines the equilibrium conditions of resist on the substrate; the viscosity and volume flux determine the relaxation time for the depositing resist solution after impact on the substrate. Electrosprayed photoresist films have been used for photolithographic patterning and it has been demonstrated that electrospray deposition is an effective method for deposition of photoresist on top of fragile, thin films, which can be used for multilayered thin film fabrication.

     

GBLT-VG for High User Densities by User Group Behavior and Hot Point in MMO Virtual Environment

Massively Multiplayer Online (MMO) games have large-scale virtual environments. Here, we propose a load distribution technique called the Group Based Load-distribution Technique with Virtual Group (GBLT-VG) that utilizes Peer-to-Peer (P2P) communication to maintain scalability under high user density conditions in MMO virtual environments. A common problem of P2P virtual environments is that user group behavior frequently generates high user density conditions. Existing techniques to manage the virtual environment cannot maintain performance in such high user density situations. The proposed technique, GBLT-VG, reduces area management loads of manager peers by introducing a new manager who manages a user neighbor group. GBLT-VG forms the user neighbor group efficiently by using party function under high user density conditions caused by users?? cooperative behaviors. In addition, GBLT-VG reduce the management load by using a virtual group when a number of parties is small, thereby decreasing the existing managers?? loads dynamically. This paper also presents simulation results demonstrating how GBLT-VG can reduce the average number of users managed by the server.     

An outcome of nuclear safety research in JAERI: case study for LOCA

An outcome of nuclear safety research (NSR) done by JAERI (Japan Atomic Energy Research Institute) was case studied by the bibliometric method. (1) For LOCA (loss-of-coolant accident) a domestic share of JAERI in monoclinic research paper was 63% at the past (20) 1978–1982 but was decreased to 40% at the present 1998–2002. For co-authored papers a domestic share between JAERI and PS (public sectors) was zero at past (20) but increased to 4% at the present. Research cooperation is active between Tokyo University and JAERI or between JAERI and Nagoya University. (2) It is revealed that LOCA outputs born by NSR-JAERI reflected partly to those of the Safety Licensing Guidelines, however, a share of NSR-JAERI could not determined due to the lack of necessary information in the Guideline.     

Programmed High‐Hole‐Mobility Supramolecular Polymers from Disk‐Shaped Molecules

In this paper a simple, casting solution technique for the preparation of two‐dimensional (2D) arrays of very‐high molecular weight (MW) 1D‐Pc supramolecular inorganic polymers is described. The soluble fluoroaluminium tetra‐tert‐butylphthalocyanine (ttbPcAlF) is synthesized and characterized, which can be self‐assembled to form 2D arrays of very‐high‐MW 1D‐Pc supramolecular inorganic polymers. High‐resolution transmission electron microscopy (HRTEM) demonstrates that the 1D‐ttbPcAlF, having a cofacial ring spacing of ～0.36 nm and an interchain distance of ～1.7 nm, self‐assembles into 2D‐nanosheets (～140 nm in length, ～20 nm in width, and equivalent to MW of 3.2 × 10⁵ g mol^?1). The film cast from a 1,2‐dichloroethane (DCE) solution shows a minimum hole‐mobility of ～0.3 cm² V^?1 s^?1 at room temperature by flash‐photolysis time‐resolved microwave conductivity (TRMC) measurements and a fairly high dark dc‐conductivity of ～1 × 10^?3 S cm^?1.     

Characterisation of volatile sulphur-containing compounds generated in crushed leaves of Chinese chive (Allium tuberosum Rottler)

To characterise the composition of sulphur-containing constituents in Chinese chive (Allium tuberosum Rottler), GC–MS and HPLC analyses were carried out, using 12 varieties of Chinese origin, 4 varieties of Japanese origin and 6 commercially available cultivars. Five disulphides (dimethyl, allyl methyl, methyl 1-(E)-propenyl, diallyl, and allyl 1-(E)-propenyl), two trisulphides (dimethyl and allyl methyl), and two vinyldithiins (3-vinyl-[4H]-1,2- and 2-vinyl-[4H]-1,3-) were identified on the basis of their mass spectral and GC-retention data. Among the detected sulphur compounds, sulphides with a methyl group predominated over those with an allyl group. This was supported by the HPLC estimations, suggesting that all cultivars examined had much greater amounts of methiin than alliin. Also, two novel compounds were tentatively identified as [3H,4H]-1,2-dithiin and [2H,4H]-1,3-dithiin on the basis of their mass spectral features, GC-retention data, and some experimental results on their formation in reaction mixtures with different proportions of methiin and alliin. Their formation mechanism was proposed.     

Facile synthesis and thermal properties of waterglass-based silica xerogel nanocomposites containing reduced graphene oxide

In this study, new rGO-silica xerogel nanocomposites (SX-rGO) and its glass fiber reinforced composites (GFR-SX-rGO) were prepared, and its microstructure and thermal properties were evaluated. The raw material was a mixed dispersion prepared by adding 0.01–2.5?wt% of reduced graphene oxide (rGO) to waterglass (6% SiO₂). A hydrogel was prepared via sol-gel reaction of this raw material, which was then immersed in hydrochloric acid, hydrophobized in a siloxane/2-propanol reaction system, and then dried at ambient pressure to obtain a hydrophobic carbon-silica xerogel composite. The obtained samples were characterized by N₂ physisorption (at 77?K), solid ²⁹Si Magic angle spinning nuclear magnetic resonance spectroscopy, Fourier-transform infrared spectroscopy, Raman spectroscopy, differential scanning calorimetry, thermogravimetric analysis, hydrophobicity, and thermal conductivity. It was found that as the amount of rGO was increased, the specific surface area of the nanocomposite decreased by ~25% from 535 to 403?cm²/g, and the average pore size and pore volume were almost halved. The thermal decomposition temperature of the SX-rGO was increased markedly by the addition of rGO. Moreover, the GFR-SX-rGO-0.5 showed low density (0.208?g/cm³), high contact angle (146°) and low thermal conductivity (0.0199?W/mK).