Effects of sulfated fucan,ascophyllan, from the brown Alga Ascophyllum nodosum on various cell lines: A comparative study on ascophyllan and fucoidan

The effects of fucose-containing sulfated polysaccharides, ascophyllan and fucoidan, isolated from the brown alga Ascophyllum nodosum, on the growth of various cell lines (MDCK, Vero, PtK₁, CHO, HeLa, and XC) were investigated. In a colony formation assay, ascophyllan and fucoidan showed potent cytotoxic effects on Vero and XC cells, while other cell lines were relatively resistant to these polysaccharides. Almost no significant effects of these polysaccharides were observed in the cell lines tested using the Alamar blue cytotoxicity assay over 48 h with varying initial cell densities (2500–20,000 cells/well) in growth medium. Interestingly, a significant growth promoting effect of ascophyllan on MDCK cells was observed, whereas treatment with fucoidan showed growth suppressive effects on this cell line under the same experimental conditions. These results suggest that ascophyllan is distinguishable from fucoidan in terms of their bioactivities. This is the first report of the growth promoting effects of a sulfated fucan on a mammalian cell line under normal growth conditions.     

Thermal degradation characteristics of oil‐filled cable joint with extremely degraded tan δ oil

Much of oil‐filled (OF) cable has been used for a long time as 66‐ to 500‐kV extrahigh‐voltage cable. Sometimes we can see extremely degraded tan δ oil (several tens of percent of tan δ, for example) in joint boxes, etc. The values of tan δ calculated by a simple combination model of paper/oil show that the oil‐impregnated paper with such a high tan δ oil likewise has an extremely high tan δ, which must result in thermal breakdown. However, such an event has not taken place up to the present in actually operated transmission lines. This fact suggests that some mechanism for the suppression of tan δ has acted in the paper insulation impregnated with degraded tan δ oil. Therefore, we investigated in detail the tan δ characteristics of paper impregnated with extremely high tan δ oil. In addition, based on the investigation results, we developed a method for simulation of heat generation by dielectric loss in an OF cable joint (which has degraded tan δ oil). © 2011 Wiley Periodicals, Inc. Electr Eng Jpn, 178(1): 1–10, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21184     

Impact of Al in Cu alloy interconnects on electro and stress migration reliabilities

The reliability of Cu interconnects was successfully improved by applying a CuAl alloy seed. However, the effect of additive Al on the reliability is not fully understood. In order to reveal the reliability improvement mechanism, Cu films using CuAl alloy seed were investigated in detail. As stress induced voiding (SIV) as well as electromigration is caused by migration of vacancies and/or Cu atoms, the measured activation energy value of electromigration using CuAl indicates that the fast diffusion paths are Cu grain boundaries. The analysis using high lateral resolution scanning type secondary ion mass spectrometry (nano-SIMS) clarifies that additive Al in ECP-Cu film is mainly localized at grain boundaries. Furthermore, positron annihilation was used to probe vacancy-type defects in Cu films. The CuAl films before recrystallization contain larger and higher density vacancy-type defects. Whereas, the recrystallized CuAl films after annealing above 250 °C contain smaller and lower density defects. Furthermore, CuAl films with annealing above 350 °C contain less Al inside the grains. These results represent that Al atoms in Cu films with annealing above 350 °C are exhausted from inside grains to the grain boundaries, and the spewed Al atoms existing at Cu grain boundary effectively prevents the diffusion of Cu and/or vacancies.     

Stochastic model predictive braking control for heavy-duty commercial vehicles during uncertain brake pressure and road profile conditions

When heavy-duty commercial vehicles (HDCVs) must engage in emergency braking, uncertain conditions such as the brake pressure and road profile variations will inevitably affect braking control. To minimize these uncertainties, we propose a combined longitudinal and lateral controller method based on stochastic model predictive control (SMPC) that is achieved via Chebyshev–Cantelli inequality. In our method, SMPC calculates braking control inputs based on a finite time prediction that is achieved by solving stochastic programming elements, including chance constraints. To accomplish this, SMPC explicitly describes the probabilistic uncertainties to be used when designing a robust control strategy. The main contribution of this paper is the proposal of a braking control formulation that is robust against probabilistic friction circle uncertainty effects. More specifically, the use of Chebyshev–Cantelli inequality suppresses road profile influences, which have characteristics that are different from the Gaussian distribution, thereby improving both braking robustness and control performance against statistical disturbances.Additionally, since theKalman filtering (KF) algorithm is used to obtain the expectation and covariance used for calculating deterministic transformed chance constraints, the SMPC is reformulated as a KF embedded deterministic MPC. Herein, the effectiveness of our proposed method is verified via a MATLAB/Simulink and TruckSim co-simulation.     

The micro-nanoformability of Pt-based metallic glass and the nanoforming of three-dimensional structures

Pt_48.75Pd_9.75Cu_19.5P₂₂ amorphous alloy exhibits obvious glass transition behavior at a temperature of T_g=502 K, which is below the crystallization temperature T_x=588 K, and develops a supercooled liquid state in a wide temperature range of ΔT_x (=T_x−T_g)=86 K. The present paper investigates the macroscopic and microscopic deformation behavior of the material and the possibility of micro-nano forming as a fabrication method and material for nano-devices. On a macroscopic scale, the material exhibits a Newtonian viscous flow in a supercooled liquid state. An index of the microformability is also evaluated by the geometrical transferability of a die shape to the material. For this study, we fabricated V-grooved micro dies of (100) Si by a silicon process. The V-groove dies are from 100 nm to 1 μm wide. The material exhibits superior formability on micrometer and nanometer scales and may possibly be applied to micro-nanomaterials for micro-nano devices.     

Recent progress in microstructural hydrogen mapping in steels: quantification,kinetic analysis,and multi-scale characterisation

ABSTRACT

This paper gives an overview of recent progress in microstructure-specific hydrogen mapping techniques. The challenging nature of mapping hydrogen with high spatial resolution, i.e. at the scale of finest microstructural features, led to the development of various methodologies: thermal desorption spectrometry, silver decoration, the hydrogen microprint technique, secondary ion mass spectroscopy, atom probe tomography, neutron radiography, and the scanning Kelvin probe. These techniques have different characteristics regarding spatial and temporal resolution associated with microstructure-sensitive hydrogen detection. Employing these techniques in a site-specific manner together with other microstructure probing methods enables multi-scale, quantitative, three-dimensional, high spatial, and kinetic resolution hydrogen mapping, depending on the specific multi-probe approaches used. Here, we present a brief overview of the specific characteristics of each method and the progress resulting from their combined application to the field of hydrogen embrittlement.

This paper is part of a thematic issue on Hydrogen in Metallic Alloys     

Distributed optimal energy consumption control of HEVs under MFG-based speed consensus

This paper investigates a distributed optimal energy consumption control strategy under mean-field game based speed consensus. Large scale vehicles in a traffic flow is targeted instead of individual vehicles, and it is assumed that the propulsion power of vehicles is hybrid electric powertrain. The control scheme is designed in the following two stages. In the first stage, in order to achieve speed consensus, the acceleration control law is designed by applying the MFG (mean-field game) theory. In the second stage, optimal powertrain control for minimizing energy consumption is obtained through coordinate the engine and the motor under the acceleration constraint. The simulation is conducted to demonstrate the effectiveness of the proposed control strategy.     

Threshold Stress for Crack Healing of Mullite Reinforced by SiC Whiskers and SiC Particles and Resultant Fatigue Strength at the Healing Temperature

A mullite/SiC whisker/SiC particle multi-composite, having excellent crack-healing ability and mechanical properties, was hot pressed in order to investigate the crack-healing behavior under stress and the resultant fatigue strength at the temperature of healing. A semi-elliptical surface crack 100 μm in surface length was introduced on each specimen. The pre-cracked specimens were crack healed under cyclic or constant stress by using a three-point bending stress at 1473 K, and the resultant bending strength and cyclic fatigue strength were measured at 1473 K. The pre-crack on the surface of the specimens could be healed even under stress. The threshold stresses for crack healing, as determined by evaluating the strengths of crack-healed specimens at a healing temperature of 1473 K, were 170 MPa for both constant and cyclic stresses, corresponding to 77% of the bending strength of the pre-cracked specimens. The static and cyclic fatigue behaviors of crack-healed specimens were also investigated at a healing temperature of 1473 K.     

Ultra-high-precision time control system over any long time delay for laser pump and synchrotron x-ray probe experiment

An ultra-high-precision clock system for long time delay has been developed for picosecond time-resolved x-ray diffraction measurements using synchrotron radiation (SR) pulses and synchronized femtosecond laser pulses. The time delay control between pump laser pulse and the probe SR pulse was achieved by combining an in-phase quadrature modulator and a synchronous counter. This method allowed us to change the delay time by a nearly infinite amount while maintaining the precision of +/-8.40 ps. Time-resolved diffraction measurements using the delay control system were demonstrated for precise measurement of an acoustic velocity in a single crystal of gallium arsenide.     

Vacuum ultraviolet photoionization mass spectra and cross-sections for volatile organic compounds at 10.5 eV

Vacuum ultraviolet single-photon ionization time-of-flight mass spectrometry (VUV-SPI-TOFMS) has been applied to the detection of volatile organic compounds (VOCs), including aromatic, chlorinated, and oxygenated compounds. Photoionization mass spectra of 23 VOCs were measured using SPI-TOFMS at 10.5 eV (118 nm). The limits of detection of VOCs using SPI-TOFMS at 10.5 eV were estimated to be a few ppbv. The mass spectra of 20 VOCs exhibit only the parent ion and its isotopes' signals. The ionization processes of the VOCs were discussed on the basis of the reaction enthalpies predicted by the quantum chemical calculations. Absolute photoionization cross-sections for 23 VOCs, including 12 newly measured VOCs, at 10.5 eV were determined in comparison to the reported absolute photoionization cross-section of NO.