Premixed edge flame in a counterflow field with a stretch rate gradient

An edge flame was established in a counterflow field with a stretch rate gradient using twin rectangular burners which were misaligned by a few degrees. The stretch rate gradient was quantitatively defined as a function of the angle between the two burners and the distance from the edge of the burner, and thus the effect of stretch rate gradient on the behavior of the edge flame was investigated. The local chemical reaction rate at the edge of a CH₄/air flame was stronger than that at other parts of the flame. On the other hand, the reaction rate at the edge of a C₃H₈/air flame was weaker than that of other parts of the flame. The curvature of the flame edge of the CH₄/air flame was much larger than that of the C₃H₈/air flame. These results are thought to be due to the effect of the Lewis number. The ratios of the local stretch rate at the flame edge to the extinction stretch rate for planar twin flames with the same composition as the edge flame were 0.5 to 0.7 for the CH₄/air flame and 0.6 to 0.8 for the C₃H₈/air flame. These values were midway between those in the numerical simulation by Daou and Linan and those in the experiment by Liu and Ronney. Moreover, it was shown that an increase in the stretch rate gradient resulted in a lower local stretch rate at the flame edge. Behavior of the edge flames did not depend on the Lewis number of the mixture.     

Linear programming software tools on UNIX System

Linear programming(LP) is one of the most widely used Operations Research/Management Science/Industrial Engineering techniques. Recently, multiple criteria decision making or multiple objective linear programming has been well established as a practical approach to seeking satisfactory solutions to real-world decision problems.

In this paper we develop software tools for solving various linear programming problems such as a traditional LP problem, bicriteria LP problem, and multi-criteria LP problem on UNIX system. In a phase for reading data of various LP problems, we define a BNF(Backus-Nauel form) of various LP problems and implement BNF rules by using the C programming language.

In a phase for computing various LP problems, we use efficient methods for solving LP problems, develop various software tools on UNIX system, and combine each LP tool corresponding to an user request in which the Shell programming is used.

We also demonstrate some real-world LP problems by using LP software tools developed here on an UNIX System. Sanyo MPS 020.     

Structure and orientation development in biaxial stretching of ultrahigh molecular weight polyethylene gel films

Ultrahigh molecular weight polyethylene (UHMWPE) gel films were prepared by gelation crystallization from decalin solutions. According to wide- and small-angle X-ray scattering (WAXD and SAXS) studies, single crystal mat texture with crystal c-axis oriented normal to film surface generally develops. However, randomly oriented structure can also develop if an external force is applied to gel films during gelation crystallization. Both textures invariably yield high drawability in uniaxial mode with outstanding modulus and strength. Biaxial films, typically 5 × 5, 6 × 6, 8 × 8, and 10 × 10 times the original dimensions, were prepared at 130°C–135°C in a biaxial stretcher. Optical microscopic Investigations reveal the development of interwoven fibrillar structure in all specimens. WAXD and SAXS studies show that lamellar structure transforms to fibrillar texture during biaxial stretching. Crystal orientation is characterized by WAXD pole figure and infrared dichroic methods. Mechanical studies suggest that tensile modulus and strength appear uniform. In comparison with uniaxial deformation, significant improvement in the lateral strength is seen in the biaxially stretched films.     

Fin efficiency of serrated fins. Part 4. Correction factor for inline arrangement

A correction factor to the theoretical fin efficiency of serrated fins, reported in Part 1 and Part 2 of this report, was derived for an inline arrangement experimentally. The experiment was performed using an open‐type wind tunnel with six kinds of test finned‐tubes made of copper, carbon steel and stainless steel, which were arranged in one to five rows. Heat transfer measurement was done by the local thermal simulation method. The derived correction factor for the 1st row was the same as for staggered arrangement reported in Part 3, for the 2nd and deeper rows, however, a further correction was needed, which may be caused by the difference in the nonuniformity in heat transfer coefficient over the fin surface. © 2004 Wiley Periodicals, Inc. Heat Trans Asian Res, 33(4): 258–269, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20008     

Heat transfer and pressure loss characteristics of a heat exchanger for recovering latent heat (effects of straight fin length and fin pitch on the heat transfer and pressure loss characteristics)

In recent years, the requirement for the reduction of energy consumption has been increasing to solve the problems of global warming and the shortage of petroleum resources. A latent heat recovery type heat exchanger is one of the effective methods for improving thermal efficiency by recovering latent heat. This paper describes the heat transfer and pressure loss characteristics of a latent heat recovery type heat exchanger having straight fins (fin length: 65 mm or 100 mm, fin pitch: 2.5 mm or 4 mm). These were clarified by measuring the exchange heat quantity, the pressure loss of the heat exchanger, and the heat transfer coefficient between the outer fin surface and gas. The effects of fin length and fin pitch on heat transfer and pressure loss characteristics were clarified. Furthermore, equations for predicting the heat transfer coefficient and pressure loss which are necessary for heat exchanger design were proposed. ©2007 Wiley Periodicals, Inc. Heat Trans Asian Res, 36(4): 230– 247, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20153 Copyright © 2004 Wiley Periodicals, Inc.     

Flow cytometric analysis of lectin-oligosaccharide interactions by using fluorescent oligosaccharide probes

Tetraphenylethylene (TPE) derivatives have strong fluorescence in aggregated state. We report here an oligosaccharide binding assay system using tetraphenylethylene derivatives bearing oligosaccharides with aggregation-induced emission (AIE) characteristics. A tetraphenylethylene derivative bearing 6'-sialyllactose (6'SL) bound to microbeads coated with SSA lectin more effectively than RCA120 lectin. Microbeads that bound to fluorescent oligosaccharide probes could be detected by flow cytometric analysis. Tetraphenylethylene derivatives bearing oligosaccharides are useful for flow cytometric analysis of lectin-oligosaccharide interactions.     

Evaluation of the possibility that free fatty acids cause false-positive result in diarrhetic shellfish poisoning mouse bioassay in actual use

Midgut glands of bivalves are used for the mouse bioassay of diarrhetic shellfish poison (DSP). A large quantity of free fatty acids (FFAs) causes a false positive outcome in the assay. To examine whether this is likely to occus under conditions of actual use, we analyzed the contents of the FFAs in the enlarged midgut glands during gametogenesis of Japanese scallops Patinopecten yessoensis that had been caught at two points in Hunka Bay on March 27, 2006, because the content of FFAs may increase with activation of lipogenesis for gametogenesis. Fatty acids (FAs) were measured with fluorometric high-performance liquid chromatography after derivatization with 9-anthryldiazomethane. The total FFAs (14 : 0, 16 : 0, 18 : 0, 16 : 1, 18 : 1, 18 : 4, 20 : 5 and 22 : 6) represented 3.3-4.2 wt% of the lipid. The toxic FFAs accounted for 40-43 wt% of the total FFAs. Content of each FFA (18 : 1, 2.7-5.0 mg/g lipid; 18 : 4, tr.-2.0 mg/g; 20 : 4, n.d.; 20 : 5, 8.0-9.1 mg/g and 22 : 6, 2.0-2.1 mg/g) was lower than the lethal dose tentatively calculated from the relative toxicity. It appears that the likelihood of FFAs causing false-positives in the mouse bioassay is low if the sample is fresh and is extracted immediately after homogenizing.     

Compensation algorithm for the phase-shift error of polarization-based parallel two-step phase-shifting digital holography

We propose an algorithm for compensating the phase-shift error of polarization-based parallel two-step phase-shifting digital holography, which is a technique for recording a spatial two-step phase-shifted hologram. Although a polarization-based system of the technique has been experimentally demonstrated, there had been the problem that the phase difference of two phase-shifted holograms had been changed by the extinction ratio of the micropolarizer array attached to the image sensor used in the system. To improve the performance of the system, we established and formulated an algorithm for compensating the phase-shift error. Accurate spatial phase-shifting interferometry in the system can be conducted by the algorithm regardless of phase-shift error due to the extinction ratio. By the numerical simulation, the proposed algorithm was capable of reducing the root mean square errors of the reconstructed image by 1/4 and 1/5 in amplitude and phase, respectively. Also, the algorithm was experimentally demonstrated, and the experimental results showed that the system employing the proposed algorithm suppressed the conjugate image, which slightly appeared in the image reconstructed by the system not employing the algorithm, even when the extinction ratio was 10:1. Thus, the effectiveness of the proposed algorithm was numerically and experimentally verified.