Origin of coercivity changes during the oxidation of Fe3O4to γ-Fe2O3

Oxidation kinetics and x-ray diffraction of the intermediate products have been investigated for several kinds of Fe3O4powders during the oxidation to γFe2O3. From these results, a two-components-hypothesis as an intermediate state of the Fe3O4- γFe2O3system is proposed, instead of a homogenious solid solution which has been widely recognized. The effect of the changes in particle size caused by the two phases oxidation products on the variations of magnetic coercivity was emphasised.     

Development of smart composite structures with small-diameter fiber Bragg grating sensors for damage detection: Quantitative evaluation of delamination length in CFRP laminates using Lamb wave sensing

The authors and Hitachi Cable, Ltd. have recently developed small-diameter optical fiber and its fiber Bragg grating (FBG) sensor for embedment inside a lamina of composite laminates without strength reduction. The outside diameters of the cladding and polyimide coating are 40 and 52 μm, respectively. First, a brief summary is presented for applications of small-diameter FBG sensors to damage monitoring in composite structures. Then, we propose a new damage detection system for quantitative evaluation of delamination length in CFRP laminates using Lamb wave sensing. In this system, a piezo-ceramic actuator generates Lamb waves in a CFRP laminate. After the waves propagate in the laminate, transmitted waves are received by an FBG sensor attached on or embedded in the laminate using a newly developed high-speed optical wavelength interrogation system. This system was applied to detect interlaminar delamination in CFRP cross-ply laminates. When the Lamb waves passed through the delamination, the amplitude decreased and a new wave mode appeared. These phenomena could be well simulated using a finite element analysis. From the changes in the amplitude ratio and the arrival time of the new mode depending on the delamination length, it was found that this system could evaluate the delamination length quantitatively. Furthermore, small-diameter FBG sensors were embedded in a double-lap type coupon specimen, and the debonding progress could be evaluated using the wavelet transform.     

Human Chorionic Villous Differentiation and Placental Development

In humans, the placenta provides the only fetomaternal connection and is essential for establishing a pregnancy as well as fetal well-being. Additionally, it allows maternal physiological adaptation and embryonic immunological acceptance, support, and nutrition. The placenta is derived from extra-embryonic tissues that develop rapidly and dynamically in the first weeks of pregnancy. It is primarily composed of trophoblasts that differentiate into villi, stromal cells, macrophages, and fetal endothelial cells (FEC). Placental differentiation may be closely related to perinatal diseases, including fetal growth retardation (FGR) and hypertensive disorders of pregnancy (HDP), and miscarriage. There are limited findings regarding human chorionic villous differentiation and placental development because conducting in vivo studies is extremely difficult. Placental tissue varies widely among species. Thus, experimental animal findings are difficult to apply to humans. Early villous differentiation is difficult to study due to the small tissue size; however, a detailed analysis can potentially elucidate perinatal disease causes or help develop novel therapies. Artificial induction of early villous differentiation using human embryonic stem (ES) cells/induced pluripotent stem (iPS) cells was attempted, producing normally differentiated villi that can be used for interventional/invasive research. Here, we summarized and correlated early villous differentiation findings and discussed clinical diseases.     

Denatured-jacalin derivatives with selective recognition for O-linked glycosides (ST,T, Tn,and STn Type) on IgA1 hinge region

Immunoglobulin A1 (IgA1) concentration in the plasma of patients with IgA nephropathy (IgAN) as the cause of renal failure is higher than that in the plasma of normal controls. IgA1 with abnormal sugars is considered to deposit in the glomerular mesangium, aggravating nephritis in IgAN. Jacalin is a lectin that recognizes sugars on IgA1. However, its selective-recognition for normal-type (ST type, NeuAc-α(2,3)-Gal-β(1,3)-GalNAc) and abnormal-type (T type, Gal-β(1,3)-GalNAc; Tn type, GalNAc; STn type, NeuAc-α(2,6)-GalNAc) sugars α-O-linked to serine/threonine in IgA1 is weak. Therefore, jacalin cannot be used for recognizing specific sugar types on IgA1. We attempted to develop a new recognition method for specific sugar types on IgA1 by utilizing the multirecognition capability of jacalin. Its binding abilities were regulated by heat denaturation with suitable template sugar (galactose or N-acetylgalactosamine). Further, we successfully prepared denatured-jacalin derivatives, which recognized ST-/T-type sugars on IgA1, by sugar-immobilized affinity chromatography. Enzyme-linked immunosorbent assay of denatured-jacalin derivatives, showed the ratios of abnormal sugars on IgA1 in the plasma of IgAN patients and normal controls to be approximately 60% and 20%, respectively. The results proved that profiling of sugar types in IgAN can successfully be performed by solely using jacalin derivatives.     

Discrete-time sliding mode control of flexible rotor-magnetic bearing systems

This paper is concerned with the computer-based sliding mode control of flexible rotor—magnetic bearing systems (FR-MBS). The plant dynamics consisting of actuator dynamics and flexible rotor dynamics are described. The reduced-order model for controller design is given by eliminating higher-order modes of the mechanical and electrical magnetic interaction system. A discrete-time sliding mode controller with a new robust reduced-order variable structure system (VSS) observer is proposed and its robust performance is evaluated with several simulations based on a calculation model. This digital controller is implemented to replace a linear analogue PID compensator. Levitation tests using the proposed digital controller are performed and compared with those of the PID compensator. The unstable modes can be easily controlled with the good stability and the spillover phenomena due to ignored higher-order modes are not generated. It is indicated that the discrete-time sliding mode control has robustness to the model parameter variations and external disturbances. Using the discrete time sliding mode controller with the reduced-order VSS observer, the test rig of the magnetic bearing system can be successfully rotated in a speed range of 0–35 000 rpm, which includes the first critical shaft frequency of the flexible rotor.     

Complete Photochemical Regulation of 8–17 DNAzyme Activity by Using Reversible DNA Photo-crosslinking

The regulation of DNAzyme activity is an important problem for its in vivo applications. We achieved photochemical regulation of DNAzyme activity by using reversible DNA photo-crosslinking of 3-cyanovinylcarbazole (^CNVK). The ODN containing ^CNVK photo-crosslinked to a pyrimidine base in the complementary strand after a few seconds of photoirradiation, and its photoadduct was split by photoirradiation of another wavelength. The activity of photo-crosslinked DNAzyme with ^CNVK was completely inhibited (OFF state). In contrast, after 312 nm irradiation, DNAzyme activity was recovered upon addition of a substrate strand (ON state). In addition, the photo-crosslinked DNAzyme is prone to enzymatic digestion by exonuclease. This photochemical OFF to ON switching with reversible DNA photo-crosslinking was regulated at the desired time and position; therefore, it might be possible to use it for in vivo application.     

Two types of a passive safety containment for a near future BWR with active and passive safety systems

The paper presents two types of a passive safety containment for a near future BWR. They are named Mark S and Mark X containment. One of their common merits is very low peak pressure at severe accidents without venting the containment atmosphere to the environment. The PCV pressure can be moderated within the design pressure. Another merit is the capability to submerge the PCV and the RPV above the core level. The third merit is robustness against external events such as a large commercial airplane crash. Both the containments have a passive cooling core catcher that has radial cooling channels. The Mark S containment is made of reinforced concrete and applicable to a large power BWR up to 1830 MWe. The Mark X containment has the steel secondary containment and can be cooled by natural circulation of outside air. It can accommodate a medium power BWR up to 1380 MWe. In both cases the plants have active and passive safety systems constituting in-depth hybrid safety (IDHS). The IDHS provides not only hardware diversity between active and passive safety systems but also more importantly diversity of the ultimate heat sinks between the atmosphere and the sea water. Although the plant concept discussed in the paper uses well-established technology, plant performance including economy is innovatively and evolutionally improved. Nothing is new in the hardware but everything is new in the performance.     

Imaging dynamics of charge-auto-organisation in glass capillaries

Multiply charged ion beam transmission through insulating capillaries is today a very active field of research. Thanks to the work of several groups during the last five years, several features of this unexpected process have been evidenced. The open challenge is to understand and control the self-organized charging-up of the capillary walls, which leads finally to the ion transmission. Up to now, the specific charge distribution on the inner surface, as well as the dynamics of the build-up, are still to be understood. While capillaries usually studied are microscopic pore networks etched in different materials, our concern is in macroscopic single capillaries made of glass. With a length of several centimeters and a diameter of a few micrometers at the exit, these capillaries have nevertheless the same aspect ratio as the etched pores (length/diameter ≈ 100). One of the leading goals of this research on single capillaries is to produce multi-charged ion beams with diameters smaller than a micrometer (nano-beams). These glass capillaries offer the opportunity to be used as an ion funnel due to their amazing properties of guiding and focusing highly charged ion beams without altering neither their initial charge state nor the beam emittance (<10⁻³ π mm mrad). However, the understanding of the underlying process is not complete and relies on models assuming charge patches distributed along the capillary and which still need to be tested. We present the first observation imaging the dynamics of the charging-up process in single glass capillaries. During the build-up of the self-organized charge deposition on the capillary walls, the 230 keV Xe²³⁺ transmitted beam is deflected back and forth several times as the outgoing current increases. This is in agreement with the picture of charge patches created sequentially along the capillary and thus deflecting the beam until a stationary state is reached.     

Flame-spread probability and local interactive effects in randomly arranged fuel-droplet arrays in microgravity

We investigated the flame-spread characteristics of randomly arranged fuel-droplet arrays in microgravity. Flame-spread probability was calculated based on a percolation model with the flame-spread-limit distance of evenly-spaced n-decane droplet arrays in microgravity. Flame-spread probability depends on the occupation fraction of droplets in a lattice and rapidly increases with the occupation fraction. The local flame-spread-limit distance of unevenly-spaced n-decane droplet arrays was experimentally investigated in microgravity. The droplets were arranged in a straight line at uneven intervals. The local flame-spread-limit distance of the unevenly-spaced droplet arrays depended on the droplet arrangement and increased from the flame-spread-limit distance of the evenly-spaced droplet arrays due to interactive effects. The flame-spread probability considering the increase in local flame-spread-limit distance is larger than that without it.     

Characterization and hydrogen sorption behaviors of FeNiCr-carbon composites derived from Fe,Ni and Cr-containing polyacrylonitrile fibers prepared by electrospinning method

In order to enhance hydrogen storage capacity of carbonaceous materials through metal modification, FeNiCr-carbon composites were prepared by calcination of Fe, Ni and Cr-containing polyacrylonitrile (PAN) fibers fabricated by electrospinning method. Fe (III), Ni (II) and Cr (III) acetylacetonates (M (acac)_n) were selected as metal sources. Increase of specific surface area and formation of micropores were observed on heat decomposition of M (acac)_n particularly through introduction of steam. Maximal hydrogen content, 1.62 mass%, was obtained at 77 K under 0.8 MPa of hydrogen for a FeNiCr-carbon composite, which contained about 15.5 mass% of metals and had specific surface area of 501 m² g^?1. The hydrogen content exceeded the hydrogen physisorption limit, 2.34 mass% per 1000 m² g^?1, which was calculated on the basis of the commensurate–incommensurate transition with an enhancing factor ρ of 1.126. After hydrogenation at 653 K, no hydrogen desorption peaks were observed for FeNiCr powders derived from M (acac)_n, and one peak at 828 K for a carbonaceous sample prepared from unmodified PAN fibers. From the most promising FeNiCr-carbon composite, another peak was recorded at 752 K in addition to the peak at 828 K. The former would be originated from hydrogen on novel sorption sites additionally created on the composite formation.