Optical properties of C60/a-C superlattice structures for solar cell applications

C₆₀/amorphous carbon superlattice structures were fabricated by shutter-controlled molecular beam deposition. The periodic structure of resulted films was confirmed by X-ray diffraction measurements. From the UV–vis reflectance/transmittance measurements, the energy shift of absorption edge was observed in the superlattice structures as a function of their well width. The carbon-based superlattice structure is the useful technique to control the band gap energy of carbon materials.     

Degradation evaluation of poly-Si TFTs by comparing normal and reverse characteristics and behavior analysis of hot-carrier degradation

We propose degradation evaluation of poly-Si TFTs by comparing normal and reverse characteristics. Since symmetrical normal and reverse characteristics indicate Joule-heating degradation whereas asymmetrical characteristics indicate hot-carrier degradation, they can be clearly and easily classified. Moreover, degradation occurrence is contrasted between standard and fine TFTs. Finally, behavior of the hot-carrier degradation is analyzed.     

Mutual injection-locking properties of monolithically-integratedsurface-emitting multiple-quantum-well distributed feedback lasers

The mutual injection-locking properties of a coupled pair of multiple-quantum-well distributed-feedback lasers with grating output couplers were investigated experimentally and theoretically. When the mutual injection locking occurred, the output of one laser decreased while that of the other increased. The locking curve was asymmetric, and a stable and an unstable locking region existed. From the theoretical analysis, it was found that the phase delay with which the electric field emitted from each laser to the other laser significantly influences the locking characteristics. The increase and decrease of the locked output power are caused by the phase delay. It is also shown that the laser which receives the larger optical injection behaves like a slave laser and the laser which has less optical injection behaves like a master laser, and the shape of the locking curve is determined by the balance between the α parameter and the thermal resistance     

A 146-mm/sup 2/ 8-gb multi-level NAND flash memory with 70-nm CMOS technology

An 8-Gb multi-level NAND Flash memory with 4-level programmed cells has been developed successfully. The cost-effective small chip has been fabricated in 70-nm CMOS technology. To decrease the chip size, a one-sided pad arrangement with compacted core architecture and a block address expansion scheme without block redundancy replacement have been introduced. With these methods, the chip size has been reduced to 146 mm/sup 2/, which is 4.9% smaller than the conventional chip. In terms of performance, the program throughput reaches 6 MB/s at 4-KB page operation, which is significantly faster than previously reported and very competitive with binary Flash memories. This high performance has been achieved by the combination of the multi-level cell (MLC) programming with write caches and with the program voltage compensation technique for neighboring select transistors. The read throughput reaches 60 MB/s using 16I/O configuration.     

Colored Fluorescent Silk Made by Transgenic Silkworms

Silk is a protein fiber used to weave fabrics and as a biomaterial in medical applications. Recently, genetically modified silks have been produced from transgenic silkworms. In the present study, transgenic silkworms for the mass production of three colors of fluorescent silks, (green, red, and orange) are generated using a vector originating from the fibroin H chain gene and a classical breeding method. The suitability of the recombinant silks for making fabrics is investigated by harvesting large amounts of the cocoons, obtained from rearing over 20 thousand silkworms. The application of low temperature and a weakly alkaline solution for cooking and reeling enables the production of silk fiber without loss of color. The maximum strain tolerated and Young's modulus of the fluorescent silks are similar to those of ordinary silk, although the maximum stress value of the recombinant silk is slightly lower than that of the control. Fabrics with fluorescent color are demonstrated using the recombinant silk, with the color persisting for over two years. The results indicate that large amounts of genetically modified silk can be made by transgenic silkworms, and the silk is applicable as functional silk fiber for making fabrics and for use in medical applications.     

Threshold for Millimeter-Wave (60 GHz)-Induced Ocular Injury

Journal of Infrared, Millimeter, and Terahertz Waves - Millimeter waves (MMW) absorbed by skin or cornea may induce damage by heat. We have developed a 60 GHz MMW exposure-induced eye...     

Application of CMP process monitor to Cu polishing

We have developed a chemical mechanical polishing (CMP) process monitor which uses polishing vibration. The monitor enables us to accurately detect the polishing end point in copper (Cu) polishing even when the process conditions such as initial film thickness, slurry flow and polishing rate are changed and when polishing multilayer film. Furthermore, the monitor is not only applicable to Cu polishing but also to planarizing polishing of an inter-level dielectric layer. The monitor can be also used to control the processes and the equipment because of its capability to detect abnormalities in the polishing conditions     

A Hybrid Decoupled Power Flow Method for Balanced Power Distribution Systems

This paper proposes a hybrid decoupled power flow method for balanced power distribution systems with distributed generation sources.The method formulates the power flow equations in active power and reactive power decoupled form with polar coordinates.Second-order terms are included in the active power mismatch iteration,and constant Jacobian and Hessian matrices are used.A hybrid direct and indirect solution technique is used to achieve efficiency and robustness of the algorithm.Active power correction is solved by means of a sparse lower triangular and upper triangular(LU) decomposition algorithm with partial pivoting,and the reactive power correction is solved by means of restarted generalized minimal residual algorithm with an incomplete LU pre-conditioner.Typical distribution generation models and distribution load models are included.The impact of zero-impedance branches is explicitly modeled through reconfiguring of the adjacent branches with impedances.Numerical examples on a sample distribution system with widespread photovoltaic installations are given to demonstrate the effectiveness of the proposed method.     

Assessing material qualities and efficiency limits of III–V on silicon solar cells using external radiative efficiency

The paper presents a quantitative approach to the investigation and comparison of the material qualities of III–V on silicon (III–V/Si) solar cells by using external radiative efficiencies. We use this analysis to predict the limiting efficiencies and evaluate the criteria of material quality in order to achieve high‐efficiency III–V/Si solar cells. This result yields several implications for the design of high‐efficiency III–V/Si solar cells. Copyright © 2016 John Wiley & Sons, Ltd.     

Ocular Effects of Exposure to 40, 75, and 95 GHz Millimeter Waves

The objective of this study was to develop a model of ocular damage induced by 40, 75, and 95 GHz continuous millimeter waves (MMW), thereby allowing assessment of the clinical course of ocular damage resulting from exposure to thermal damage-inducing MMW. This study also examined the dependence of ocular damage on incident power density. Pigmented rabbit eyes were exposed to 40, 75, and 95 GHz MMW from a spot-focus-type lens antenna. Slight ocular damage was observed 10 min after MMW exposure, including reduced cornea thickness and reduced transparency. Diffuse fluorescein staining around the pupillary area indicated corneal epithelial injury. Slit-lamp examination 1 day after MMW exposure revealed a round area of opacity, accompanied by fluorescence staining, in the central pupillary zone. Corneal edema, indicative of corneal stromal damage, peaked 1 day after MMW exposure, with thickness gradually subsiding to normal. Three days after exposure, ocular conditions had almost normalized, though corneal thickness was slightly greater than that before exposure. The 50% probability of ocular damage (DD₅₀) was in the order 40?>?95?≈?75 GHz at the same incident power densities.