Adsorption isotherms of pigments from alkali-refined vegetable oils with clay minerals

Adsorption isotherms of pigments from alkali-refined oils (rapeseed, soybean, wheatgerm, safflower, corn, cottonseed and sunflower) were measured to investigate the applicability of the Langmuir and Freundlich equations and to elucidate the adsorption characteristics of pigments on sepiolites and standard activated clay. The Freundlich equation was more applicable to the experimental adsorption isotherms. The equilibrium amount adsorbed, acidity, pore size distribution and inflection of the Freundlich isotherms could be explained by assuming that pigments were adsorbed on the stronger acid sites in smaller pores at low concentration, and then in the larger ones when the concentration increased. The amount adsorbed increased with a rise in adsorption temperatures from 70 to 110°C, and the heat of adsorption was below 10 kcal/mol. The results indicate that pigments were physically adsorbed on the acid sites activated at higher adsorption temperatures.     

A facile synthesis of hydro- and vinyl-functionalized di- and tetrasiloxanes and polyaddition via hydrosilylation

Summary Hydro- and vinyl-bifunctionalized di- or tetrasiloxane were synthesized by degradative cleavage of functional cyclic siloxanes with methyllithium followed by quenching with a functional chlorosilane, or by ring-opening of hexamethylcyclotrisiloxane (D₃) by functional alkyllithium followed by quenching with a functional chlorosilane. These bifunctionalized siloxanes were used as monomers in polyaddition with transition metal catalysts.     

Structural and hydration properties of amorphous tricalcium silicate

Mechanical milling was carried out to synthesize amorphous tricalcium silicate (Ca₃SiO₅) sample, where Ca₃SiO₅ is the most principal component of Portland cement. The partial phase transformation from the crystalline to the amorphous state was observed by X-ray and neutron diffractions. Moreover, it was found that the structural distortion on the Ca-O correlation exists in the milled Ca₃SiO₅. The hydration of the milled Ca₃SiO₅ with D₂O proceeds as follows: the formation of hydration products such as Ca(OD)₂ rapidly occurs in the early hydration stage, and then proceeds slowly after about 15 h. The induction time for the hydration of the milled Ca₃SiO₅ is approximately one half shorter than that for the hydration of the unmilled one. This result means that the mechanical milling brings about the chemical activity of Ca₃SiO₅ for hydration, and may be particularly useful for increasing the reactivity in the early hydration stage.     

Observation of the epicerebral microcirculation studied by fluorescein angiography (author's transl)

Fluorescein angiography was carried out by modification of method as described by Feindel et al. The hemisphere was widely exposed to allow visualization of surface blood vessels. In the experimental room, the dye was injected rapidly either through a fine polyethylen catheter placed in the lingual artery or thorough the cannula in the femoral vein. For "lingual" angiography 1.6 ml of 1% sodium fluorescein were used, while for "femoral" angiography, 4 ml of 10% solution were injected. In the operating room 4 ml of 1% sodium fluorescein are rapidly injected into an internal carotid catheter. Serial photographs of the passage of the dye through the surface vessels of the hemisphere were taken with a motor-drive Nikon camera at interval of 0.4 seconds, or longer when indicated, starting at the time of the injection. The shutter was synchronized with the discharge of a rapid re-charging stroboscopic light. A wratten gelatin filter 47A (Kodak) was used over the light and a Nikon filter Y52 over the camera lens for Kodak high speed ektachrome film to obtain color photographs. The timing of the interval between photographs was measured to within in 0.4 seconds by recording from a ink written oscillography synchronized with the shutter. Thus the velocity of flow in individual vessels could be calculated from the serial photographs.     

Size Distribution of Gold Nanoparticles Used by Small Angle X-ray Scattering

The size distribution of gold nanoparticles was estimated based on the scattering intensity data obtained from small angle X-ray scattering (SAXS) and compared with the result of micrographs by transmission electron microscopy. The slope of the Guinier plot was used to estimate the mean size assuming a narrow particle size distribution. When the size distribution is narrow, the mean size can be easily obtained from slope of a Guinier plot of scattering data within 10% error. Additionally, assuming a lognormal size distribution, the size distribution and the mean size can be calculated using the experimental SAXS data in the fitting analysis. The histogram method, which utilizes the coefficient matrix of scattering intensity, was also applied to the estimation of the size distribution, and this method could be useful for a rough estimate of the size distribution.     

Effect of radial curvature of magnetic media on glide avalanche

Spacing loss due to micro-waviness and curvature effects in the radial direction of a disk was investigated via numerical simulations and measurements. New techniques based on interferometry and laser scanning were employed to measure radius of curvature (ROC) and to reconstruct the profiles at the outer edge of a disk. A good correlation between ROC values and fly height degradation was obtained, and ROC less than 50 m clearly showed the deterioration in fly height by as much as 1.5 nm. The new measurement techniques proved to be an important means to improve substrate manufacturing processes.     

Characterization of tribo-layers on self-lubricating plasma-assisted chemical-vapor-deposited TiN coatings

Recently, several new solid lubricants and modern lubrication concepts have been developed to achieve lower friction and wear and thus longer lifetime in severe tribological applications. The aim of this study is to characterize tribo-layers formed during ball-on-disc testing on low-friction, Cl-containing TiN coatings deposited by plasma assisted chemical vapor deposition and to clarify their formation mechanism. Characterization of the transfer layers was done by optical microscopy, optical profilometry, Raman spectroscopy, Auger electron spectroscopy and X-ray photoelectron spectroscopy. Differential scanning calorimetry was used to provide information on the chlorine-influenced chemical reactions of the coatings in ambient air. Iron oxide layers of a thickness in the nm-range have been found on low-chlorine containing TiN coatings (<3 at.% Cl) showing friction coefficients of approximately 0.8, whereas on TiN coatings with higher chlorine contents (>3 at.% Cl) rutile layers were preferably formed, resulting in friction coefficients below 0.2. This self-lubrication mechanism can be explained by the in-situ formation of easy-shearable titanium oxides in the contact zone in the presence of humidity and oxygen.     

High temperature superconductor micro-superconducting-quantum-interference-device magnetometer for magnetization measurement of a microscale magnet

We have developed a high temperature superconductor (HTS) micrometer-sized dc superconducting quantum interference device (SQUID) magnetometer for high field and high temperature operation. It was fabricated from YBa2Cu3O7-delta of 92 nm in thickness with photolithography techniques to have a hole of 4x9 microm2 and 2 microm wide grain boundary Josephson junctions. Combined with a three dimensional magnetic field coil system, the modulation patterns of critical current Ic were observed for three different field directions. They were successfully used to measure the magnetic properties of a molecular ferrimagnetic microcrystal (23x17x13 microm3), [Mn2(H2O)2(CH3COO)][W(CN)8]2H2O. The magnetization curve was obtained in magnetic field up to 0.12 T between 30 and 70 K. This is the first to measure the anisotropy of hysteresis curve in the field above 0.1 T with an accuracy of 10(-12) J T(-1) (10(-9) emu) with a HTS micro-SQUID magnetometer.     

Macro-autoradiographs of alpha emitters in environmental materials observed with solid-state track detector CR-39

Macro-autoradiographs of alpha emitters in environmental materials were obtained with solid-state nuclear track detector CR-39. This method is applicable only to alpha particles, and because their penetration ranges are very short, the obtained images are very clear. Since the method is simple and inexpensive, it can be used even at the high-school level. From the etch pit density obtained by microscopic observation, the radioactivity density of materials can be determined by using some theoretical calculations.     

Detection method of emerging leading papers using time transition

To survive worldwide competitions of research and development in the current rapid increase of information, decision-makers and researchers need to be supported to find promising research fields and papers. But finding those fields from an available data in too much heavy flood of information becomes difficult. We aim to develop a methodology supporting to find emerging leading papers with a bibliometric approach. The analyses in this work are about four academic domains using our time transition analysis. In the time transition analysis, after citation networks are constructed, centralities of each paper are calculated and their changes are tracked. Then, the centralities are plotted, and the features of the leading papers are extracted. Based on the features, we proposed ways to detect the leading papers by focusing on in-degree centrality and its transition. This work will contribute to finding the leading paper, and it is useful for decision-makers and researchers to decide the worthy research topic to invest their resources.