A 90-nm logic technology featuring strained-silicon

A leading-edge 90-nm technology with 1.2-nm physical gate oxide, 45-nm gate length, strained silicon, NiSi, seven layers of Cu interconnects, and low-/spl kappa/ CDO for high-performance dense logic is presented. Strained silicon is used to increase saturated n-type and p-type metal-oxide-semiconductor field-effect transistors (MOSFETs) drive currents by 10% and 25%, respectively. Using selective epitaxial Si/sub 1-x/Ge/sub x/ in the source and drain regions, longitudinal uniaxial compressive stress is introduced into the p-type MOSEFT to increase hole mobility by >50%. A tensile silicon nitride-capping layer is used to introduce tensile strain into the n-type MOSFET and enhance electron mobility by 20%. Unlike all past strained-Si work, the hole mobility enhancement in this paper is present at large vertical electric fields in nanoscale transistors making this strain technique useful for advanced logic technologies. Furthermore, using piezoresistance coefficients it is shown that significantly less strain (/spl sim/5 /spl times/) is needed for a given PMOS mobility enhancement when applied via longitudinal uniaxial compression versus in-plane biaxial tension using the conventional Si/sub 1-x/Ge/sub x/ substrate approach.     

Discerning nonstationarity from nonlinearity in seizure-free and preseizure EEG recordings from epilepsy patients

A number of recent studies indicate that nonlinear electroencephalogram (EEG) analyses allow to define a state predictive of an impending epileptic seizure. In this paper, we combine a method for detecting nonlinear determinism with a novel test for stationarity to characterize EEG recordings from both the seizure-free interval and the preseizure phase. We discuss differences between these periods, particularly an increased occurrence of stationary, nonlinear segments prior to seizures. These differences seem most prominent for recording sites within the seizure-generating area and for EEG segments less than one minute's length.     

220GHz低噪声放大器研究

基于IHP锗硅BiCMOS工艺,研究和实现了两种220 GHz低噪声放大器电路,并将其应用于220 GHz太赫兹无线高速通信收发机电路。一种是220 GHz四级单端共基极低噪声放大电路,每级电路采用了共基极（Common Base, CB）电路结构,利用传输线和金属-绝缘体-金属(Metal-Insulator-Metal, MIM)电容等无源电路元器件构成输入、输出和级间匹配网络。该低噪放电源的电压为1.8 V,功耗为25 mW,在220 GHz频点处实现了16 dB的增益,3 dB带宽达到了27 GHz。另一种是220 GHz四级共射共基差分低噪声放大电路,每级都采用共射共基的电路结构,放大器利用微带传输线和MIM电容构成每级的负载、Marchand-Balun、输入、输出和级间匹配网络等。该低噪放电源的电压为3 V,功耗为234 mW,在224 GHz频点实现了22 dB的增益,3 dB带宽超过6 GHz。这两个低噪声放大器可应用于220 GHz太赫兹无线高速通信收发机电路。     

Time‐resolved investigation of Cu(In,Ga)Se2 growth and Ga gradient formation during fast selenisation of metallic precursors

Ga segregation at the backside of Cu(In,Ga)Se₂ solar cell absorbers is a commonly observed phenomenon for a large variety of sequential fabrication processes. Here, we investigate the correlation between Se incorporation, phase formation and Ga segregation during fast selenisation of Cu–In–Ga precursor films in elemental selenium vapour. Se incorporation and phase formation are analysed by real‐time synchrotron‐based X‐ray diffraction and fluorescence analysis. Correlations between phase formation and depth distributions are gained by interrupting the process at several points and by subsequent ex situ cross‐sectional electron microscopy and Raman spectroscopy. The presented results reveal that the main share of Se incorporation takes place within a few seconds during formation of In–Se at the top part of the film, accompanied by outdiffusion of In out of a ternary Cu–In–Ga phase. Surprisingly, CuInSe₂ starts to form at the surface on top of the In–Se layer, leading to an intermediate double graded Cu depth distribution. The remaining Ga‐rich metal phase at the back is finally selenised by indiffusion of Se. On the basis of a proposed growth model, we discuss possible strategies and limitations for the avoidance of Ga segregation during fast selenisation of metallic precursors. Solar cells made from samples selenised with a total annealing time of 6.5 min reached conversion efficiencies of up to 14.2 % (total area, without anti‐reflective coating). The evolution of the Cu(In,Ga)Se₂ diffraction signals reveals that the minimum process time for high‐quality Cu(In,Ga)Se₂ absorbers is limited by cation ordering rather than Se incorporation. Copyright © 2014 John Wiley & Sons, Ltd.     

Einflu? des Erhitzens auf L?slichkeit und Elektrophoreseverhalten der Sarkoplasmaproteine von Rind- und Schweinefleisch

Zusammenfassung Die Hitzestabilität der Sarkoplasmaproteine bei Rind- und Schweinefleisch wurde anhand der Löslichkeit und der Proteinmuster nach elektrophoretischer Auftrennung untersucht. Als Untersuchungsmethoden kamen die Proteinbestimmung nach Bradford und die isoelektrische Focussierung in rehydratierbaren Polyacrylamidgelen zur Anwendung. Die focussierten Proteine wurden mit Hilfe der Silberfärbung sichtbar gemacht. Die Gesamtproteinkonzentrationen der Extrakte verringerten sich bis zu einer Temperatur von 80°C mit zunehmender Höhe und Dauer der Hitzebelastung. Bei den auf 100°C erhitzten Proben nahmen die Proteinkonzentrationen wieder geringfügig zu. Die Intensität der Proteinbanden nahm allgemein mit steigender Temperatur und Erhitzungszeit ab. Die deutlichsten Änderungen der Bandenmuster zeigten sich im untersuchten Temperaturbereich bei dem auf 100°C erhitzten Fleisch. Durch eine Nacherhitzung der Fleischproben konnten erhitzungsbedingte Unterschiede in den Bandenmuster ausgeglichen werden. Auf diese Weise ist eine elektrophoretische Tierartenidentifizierung bei erhitztem Fleisch unabhängig von der Kenntnis der Erhitzungsbedingungen möglich.

---

Influence of heat on solubility and electrophoretic behaviour of sarcoplasmic proteins of beef and pork

Summary The heat stability of sarcoplasmic proteins of beef and pork was investigated by means of their solubility and their protein patterns after electrophoretic separation. The method of determination of proteins described by Bradford and isoelectric focusing in rehydratable polyacrylamide gels were used for these investigations. The electrofocused proteins were visualized by silver staining. The concentration of total protein of the extracts decreased with increase in temperature and heating time (up to a temperature of 80° C). However the protein concentration increased in samples heated to 100° C. The intensity of the protein bands decreased with increasing temperature and heating time. In the investigated range of temperature, variations in protein patterns were most significant in meat heated to 100° C. Differences of protein pattern caused by different heating conditions could be equalized by a second heating of the samples. In this way it is possible to identify meat species without knowing the heating conditions.

     

Stereoisomere Aromastoffe

Zusammenfassung Es werden Methoden zur racemisie-rungsfreien Stereodifferenzierung der 2-Methylbuttersäure (direkt bzw. nach Esterhydrolyse) aus Äpfeln und apfelhaltigen Lebensmitteln beschrieben. Die Enantiomerenverteilung der 2-Methylbuttersäure kann direkt an permethylierter-Cyclodextrinphase gaschromatogra-phisch bestimmt werden. Es wird stets hoher Enantiomerenüberschuß zugunsten des (S)-Isomeren der Säure nachgewiesen. Proben von naturidentischem und natürlichem (biotechnologisch hergestelltem) 2-Methyl-buttersäureethylester sowie Äpfel, Apfelsaft, Apfellikör, Calvados, Apfelwein, Apfelmarmelade und Joghurts mit Apfelzusatz werden untersucht. Ein Zusatz von naturidentischen, racemischen 2-Methylbuttersäureestern ist einfach nachweisbar.

---

Stereoisomeric flavour compounds. XLII. Enantiomer distribution of 2-methylbutanoic acid in apples and apple-containing food

Summary The direct Stereodifferentiation of 2-methyl-butanoic acid and its esters (after hydrolysis) from apples and apple-containing food is described, using permethyl-ated-cyclodextrin as the chiral CGC phase. In all cases, high enantiomeric excess in favour of the (S)-enantiomer was ascertained. The method is applicable to apples, apple juice, apple liquor, calvados, apple wine, apple jam and apple-containing yoghurts. The addition of race-mic (nature-identical) esters may be easily detected.

     

Zur Problematik der selektiven Erfassung von PSP-Toxinen aus Muscheln

Zusammenfassung Die Messung der PSP-Belastung (paralytic shellfish poisoning) von Schalentieren erfolgt vor allem mit Hilfe des Maus-Biotestes. Um PSP-Toxine sowohl qualitativ als auch quantitativ besser bestimmen zu können, wurden chromatographische Verfahren mit Fluorescenzdetektion entwickelt. Diese HPLC-Methoden sowie die Kopplung HPLC/MS gelangten zum Einsatz, um in spanischen Muschelkonserven ein neben Saxitoxin vermutetes zweites PSP-Toxin nachzuweisen. Es zeigte sich, daß in den 1986 in der Bundesrepublik Deutschland wegen zu hoher PSP-Konzentrationen beanstandeten Muschelkonserven vor allem Decarbamoyl-Saxitoxin enthalten war.

---

The problem of the selective determination of PSP-toxins in mussels

Summary Levels of paralytic shellfish poisoning (PSP) toxins in shellfish are routinely determined by mouse bioassay: In order to improve the qualitative and quantitative determination of PSP toxins, Chromatographic techniques with fluorescence detection have been developed. These HPLC methods and the HPLC/MS coupling were used to determine a second PSP toxin which was found, in addition to saxitoxin, in canned Spanish mussels. These canned mussels were rejected in 1986 by the German food control because PSP concentrations were too high. It has been shown that these samples contained mainly dc-saxitoxin.

---

---

Herrn Professor Dr. A. Montag zum 60. Geburtstag gewidmet     

245 GHz接收机芯片片外测试与实验

为了实现太赫兹气体频谱分析传感器,对245 GHz次谐波接收机芯片的片外测试展开研究。建立了245 GHz次谐波接收机片外测试系统以及基于245 GHz接收机芯片及发射机芯片的气体频谱分析传感器片外展示测试系统,对245 GHz次谐波接收机芯片转换增益和带宽进行测试。片外测试系统得到15 dB转换增益和15 GHz带宽;片外展示测试系统得到9 dB转换增益和16 GHz带宽。片外测试系统和片外展示测试系统结果基本吻合。在片外展示测试系统中加入气腔,即构成气体频谱分析传感器。与现有同类型传感器相比,本文的次谐波接收机具有高增益、高带宽、集成本地振荡信号、低功耗等优势,非常适用于消费电子领域小体积的智能气体频谱分析传感器。     

Polylactide‐block‐Polypeptide‐block‐Polylactide Copolymer Nanoparticles with Tunable Cleavage and Controlled Drug Release

A versatile nanoparticle system is presented in which drug release is triggered by enzymatic polymer cleavage, resulting in a physicochemical change of the carrier. The polylactide‐block‐peptide‐block‐polylactide triblock copolymer is generated by initiation of the ring‐opening polymerization of L‐lactide with a complex bifunctional peptide having an enzymatic recognition and cleavage site (Pro‐Leu‐Gly‐Leu‐Ala‐Gly). This triblock copolymer is specifically bisected by matrix metalloproteinase‐2 (MMP‐2), an enzyme overexpressed in tumor tissues. Triblock copolymer nanoparticles formed by nonaqueous emulsion polymerization are readily transferred into aqueous media without aggregation, even in the presence of blood serum. Cleavage of the triblock copolymer leads to a significant decrease of the glass transition temperature (T_g) from 39 °C to 31 °C, likely mediating cargo release under physiological conditions. Selective drug targeting is demonstrated by hampered mitosis and increased cell death resulting from drug release via MMP‐2 specific cleavage of triblock copolymer carrier. On the contrary, nanocarriers having a scrambled (non‐recognizable) peptide sequence do not cause enhanced cytotoxicity, demonstrating the enzyme‐specific cleavage and subsequent drug release. The unique physicochemical properties, cleavage‐dependent cargo release, and tunability of carrier bioactivity by simple peptide exchange highlight the potential of this polymer‐nanoparticle concept as platform for custom‐designed carrier systems.