600 MHz optical signal transmission at the 3 ?m band using a fluoride optical fibre and a superconducting detector

We have demonstrated operation of a transmission system at the 3 ?m band. The system consists of a fluoride optical fibre, a superconducting BaPb1?xBixO3 (BPB) detector and a semiconductor Pb-salt diode laser. The low-level optical signal transmitted through the fibre is detected by the BPB detector up to 600 MHz. The observed results suggest that the BPB detector is suitable for use in infra-red optical transmission.     

Use of the finite element method to determine epicardial from body surface potentials under a realistic torso model

This paper presents a new method of solution for the inverse problem in electrocardiography using the finite element procedure. It is an application of the authors' earlier work which derived a solution method by means of an integral equation under a generalized configuration of geometry and conductivity of the torso. Based on prior geometry information, the human torso region is discretized into a series offinite elements and, then, electric fields are computed when a set of linearly independent functions chosen as a basis is imposed on the epicardial surface. The set of these forward solutions defines the forward transfer coefficients which relate epicardial to body surface potentials. By the use of the forward transfer coefficients, a constrained least-squares estimate of the epicardial potential distribution can be obtained from measured body surface potentials. The solution method is examined through numerical experiments carried out for a realistic model of the human torso. It is demonstrated that the rapid decrease in voltage far from the heart generator makes this inverse problem ill conditioned and, as a result, the accuracy of the inverse epicardial potentials calculated depends greatly upon both the signal-to-noise ratio and the number of lead points in measuring the body surface potentials.     

Imaging blend morphology of unstained styrene-N-phenyl-male- imide-styrene-co-acrylonitrile using electron microscopy

Abstracts are not published in this journal This revised version was published online in November 2006 with corrections to the Cover Date.     

Morphology and structural properties of pH-responsive amphiphilic peptides

Protein nanomaterials at the peptide level have shown great potential for medical applications. Peptides change their morphological conformation because of changes in self-assembly properties when they are exposed to changes in solvent composition or pH. Two 15-residue peptide sequences, KhK (KKKFLIVIGSIIKKK) and Alternating Kh (KFLKKIVKIGKKSII), were designed for the purpose of determining the role of peptide sequence on solution morphology and conformation. KhK solutions exhibited a random coil to helical transition when solvent conditions were changed from water to a trifluorethanol/water solution at acidic pH. Alternating Kh solutions, however, demonstrated primarily random coil character under similar solvent and pH conditions as determined by circular dichroism spectroscopy and 2D-1H-1H nuclear magnetic resonance spectroscopy. At basic pH, circular dichroism spectroscopy and nuclear magnetic resonance spectroscopy analysis demonstrated that random coil character increased at basic pH for KhK, whereas Alternating Kh exhibited an increase in beta-sheet character. Further analysis by transmission electron microscopy showed marked differences in the peptide solution morphology. Peptide particle aggregation and fiber formation were significantly affected by solvent composition and pH values for both peptide sequences.     

Sintering Metal–Organic Framework Gels for Application as Structural Adhesives

Metal–organic frameworks (MOFs)/coordination polymers are promising materials for gas separation, fuel storage, catalysis, and biopharmaceuticals. However, most applied research on MOFs is limited to these functional materials thus far. This study focuses on the potential of MOFs as structural adhesives. A sintering technique is applied to a zeolitic imidazolate framework-67 (ZIF-67) gel that enables the joining of Cu substrates, resulting in a shear strength of over 30 MPa, which is comparable to that of conventional structural adhesives. Additionally, systematic experiments are performed to evaluate the effects of temperature and pressure on adhesion, indicating that the removal of excess 2-methylimidazole and the by-product (acetic acid) from the sintered material by vaporization results in a microstructure composed of large spherical ZIF-67 crystals that are densely aggregated, which is essential for achieving a high shear strength.     

Low‐Energy Electron Beam Induced Charging and Secondary Electron Emission Properties of FEP Film Used on Satellite Surfaces

Many kinds of insulating materials are used outside a spacecraft. They include FEP films, polyimide films, and so on, and are used as thermal control materials. These materials are exposed to a charged‐particle environment around the spacecraft. Thus then become charged due to charged particles, especially electrons. It has been pointed out that charging of these materials is likely to cause discharges on the surfaces. From this viewpoint, we investigated the charging potential characteristics of 127‐μm‐thick FEP film, a typical thermal control material, by exposing it to electron irradiation at various energies below 20 keV. In the dependence of the charging potential on the electron energy, we found that the electron energy at which no charge‐up occurs is about 2.7 keV. This appears to be the energy at the which secondary electron emission yield becomes unity. This indicates that electron irradiation of FEP film with energies lower than 2.7 keV induces positive charging. From the charge decay characteristics after electron irradiation, the volume resistivity of the film was also obtained as a function of the electric fields in the bulk of the FEP film.     

Short communication: estimation of plasma osmolality from plasma electrolytes, glucose, and urea in calves

Plasma osmolality estimated from plasma concentrations of Na+, Cl-, K+, glucose, and urea was compared with measured osmolality in preweaned Holstein calves. When calves (n = 5) were fed only milk replacer after fasting for 24 h, measured osmolality fluctuated almost in parallel with estimated osmolality during the 8-h period after feeding, although estimated values were about 90% of measured values. When calves (n = 5) were fed only calf starter after fasting for more than 16 h, measured osmolality did not parallel the estimated osmolality during the 8-h period after feeding. Some factors depressed measured osmolality in the first 2 h.     

Crack-Healing Behavior of Si3N4/SiC Ceramics under Cyclic Stress and Resultant Fatigue Strength at the Healing Temperature

Si₃N₄/SiC composite ceramics were sintered and subjected to three-point bending. A semi-elliptical surface crack of 100 μm surface length was made on each specimen. The crack-healing behavior under cyclic stress of 5 Hz, and resultant cyclic fatigue strengths at healing temperatures of 1100° and 1200°C, were systematically investigated. The main conclusions are as follows: (1) Si₃N₄/SiC composite ceramics have an excellent ability to heal a crack at 1100° and 1200°C. (2) This sample could heal a crack even under cyclic stress at a frequency of 5 Hz. (3) The crack-healed sample exhibited quite high cyclic fatigue strength at each crack-healing temperature, 1100° and 1200°C.     

Evaluation of Three-Dimensional Bioprinted Human Cartilage Powder Combined with Micronized Subcutaneous Adipose Tissues for the Repair of Osteochondral Defects in Beagle Dogs

Cartilage lesions are difficult to repair due to low vascular distribution and may progress into osteoarthritis. Despite numerous attempts in the past, there is no proven method to regenerate hyaline cartilage. The purpose of this study was to investigate the ability to use a 3D printed biomatrix to repair a critical size femoral chondral defect using a canine weight-bearing model. The biomatrix was comprised of human costal-derived cartilage powder, micronized adipose tissue, and fibrin glue. Bilateral femoral condyle defects were treated on 12 mature beagles staged 12 weeks apart. Four groups, one control and three experimental, were used. Animals were euthanized at 32 weeks to collect samples. Significant differences between control and experimental groups were found in both regeneration pattern and tissue composition. In results, we observed that the experimental group with the treatment with cartilage powder and adipose tissue alleviated the inflammatory response. Moreover, it was found that the MOCART score was higher, and cartilage repair was more organized than in the other groups, suggesting that a combination of cartilage powder and adipose tissue has the potential to repair cartilage with a similarity to normal cartilage. Microscopically, there was a well-defined cartilage-like structure in which the mid junction below the surface layer was surrounded by a matrix composed of collagen type I, II, and proteoglycans. MRI examination revealed significant reduction of the inflammation level and progression of a cartilage-like growth in the experimental group. This canine study suggests a promising new surgical treatment for cartilage lesions.     

The Complete Loss of p53 Expression Uniquely Predicts Worse Prognosis in Colorectal Cancer

p53 immunohistochemistry is considered an accurate surrogate marker reflecting the underlying TP53 mutation status and has utility in tumor diagnostics. In the present study, 269 primary CRCs were immunohistochemically evaluated for p53 expression to assess its utility in diagnostic pathology and prognostication. p53 expression was wild-type in 59 cases (23%), overexpressed in 143 cases (55%), completely lost in 50 cases (19%), and cytoplasmic in 10 cases (4%). p53 immunoreactivity was associated with tumor size (p = 0.0056), mucus production (p = 0.0015), and mismatch repair (MMR) system status (p < 0.0001). Furthermore, among CRCs with wild-type p53 expression, a significantly higher number of cases had decreased CDX2 than those with p53 overexpression (p = 0.012) or complete p53 loss (p = 0.043). In contrast, among CRCs with p53 overexpression, there were significantly fewer ALCAM-positive cases than p53 wild-type cases (p = 0.0045). However, no significant association was detected between p53 immunoreactivity and the “stem-like” immunophenotype defined by CDX2 downregulation and ALCAM-positivity. Multivariate Cox hazards regression analysis identified tubular-forming histology (hazard ratio [HR] = 0.17, p < 0.0001), younger age (HR = 0.52, p = 0.021), and female sex (HR = 0.55, p = 0.046) as potential favorable factors. The analysis also revealed complete p53 loss (HR = 2.16, p = 0.0087), incomplete resection (HR = 2.65, p = 0.0068), and peritoneal metastasis (HR = 5.32, p < 0.0001) as potential independent risk factors for patients with CRC. The sub-cohort survival analyses classified according to chemotherapy after surgery revealed that CRC patients with wild-type p53 expression tended to have better survival than those with overexpression or complete loss after chemotherapy. Thus, immunohistochemistry for p53 could be used for the prognostication and chemotherapy target selection of patients with CRC.