Decomposition of chlorofluorocarbons on TiO2ZrO2

The decomposition of chlorofluorocarbons (CFCs) in the presence of water was examined over a variety of solid acid catalysts. The TiO₂ZrO₂ catalyst was found to have the highest activity and longest life among the catalysts examined. The activity of the TiO₂ZrO₂ catalysts depended upon the content of TiO₂. At the contents of TiO₂ from 58 to 90 mole%, the TiO₂ZrO₂ catalysts exhibited high activity, and these catalysts were proven to contain TiZrO₄ crystal. From the study of the XRD peak intensity of the TiZrO₄ crystal, it was highest on the TZ-58 which contained 58 mole% of TiO₂, and decreased with increasing the content of TiO₂. Furthermore, the conversion of CFC113 measured at 673 K was highest at TZ-58, and decreased gradually with increasing TiO₂ content. Therefore, the TiZrO₄ crystal influences the activity of decomposition of CFC113. However, the TiO₂ZrO₂ catalyst was gradually deactivated during the reaction due to the elimination of titanium atoms. A good relationship was found between the activity on TiO₂ZrO₂ catalyst and bond energy of CCl in the compounds of chlorofluorocarbons and hydrochlorocarbons, suggesting that the rate controlling step was the cleavage of CCl bond.     

Microscopic structure of athabasca oil sand

A refined structural model for in situ oil sands is proposed in terms of the mutual arrangement of sand grains, fines, water and bitumen. In the Athabasca deposit, the sand grains consist mainly of quartz and their packing is such that the porosity is about 35%. In rich oil sand, 10–15% of the pore space is occupied by connate water whereas the remainder is occupied by bitumen. For lower grade oil sands, a direct correlation exists between the water content and the amount of fines (particles smaller than 44 μm) and an inverse correlation exists between the bitumen content and the amount of fines. These relationships are successfully explained in terms of the irreducible water saturation in a porous medium and the double layer interaction between sand and bitumen surfaces.     

Biocomposites Made from Short Abaca Fiber and Biodegradable Polyesters

Natural fiber‐reinforced biodegradable polyester composites were prepared from biodegradable polyesters and surface‐untreated or ‐treated abaca fibers (length ca. 5 mm) by melt mixing and subsequent injection molding. Poly(butylene succinate)(PBS), polyestercarbonate (PEC)/poly(lactic acid)(PLA) blend, and PLA were used as biodegradable polyesters. Esterifications using acetic anhydride and butyric anhydride, alkali treatment, and cyanoethylation were performed as surface treatments on the fiber. The flexural moduli of all the fiber‐reinforced composites increased with fiber content. The effect of the surface treatment on the flexural modulus of the fiber‐reinforced composites was not so pronounced. The flexural strength of PBS composites increased with fiber content, and esterification of the fiber by butyric anhydride gave the best result. For the PEC/PLA composites, flexural strength increased slightly with increased fiber content (0–20 wt.‐%) in the case of using untreated fiber, while it increased considerably in the case of using the fiber esterified by butyric anhydride. For the PLA composite, flexural strength did not increase with the fiber reinforcement. The result of soil‐burial tests showed that the composites using untreated fiber have a higher weight loss than both the neat resin and the composites made using acetylated fiber.

Flexural modulus of PBS composites as a function of fiber content.     

Co‐injection molding of PVC with other thermoplastics: Processing,properties, and applications

Rigid poly(vinyl chloride) (PVC) was co‐injected with glass‐fiber‐reinforced PVC (GFR‐PVC), polypropylene (PP), acrylonitrile‐butadiene‐styrene copolymer (ABS), and polycarbonate (PC) by using the Mono‐sandwich co‐injection process. Up to three through‐thickness skin‐core morphologies were observed along the length of the sample. Near the gate, the core was always a single, continuous layer. In some cases, the core diverged into multiple or discontinuous layers. Farther from the gate, flow of the core ceased, leaving a skin‐only region. The skin and core layers were more uniformly distributed through the test plaque when injection speed was low. Adhesion between PVC and PP was poor. Skin and core layers delaminated, and mechanical properties were poor. The PVC adhered well to GFR‐PVC, ABS, and PC. No layer delamination occurred, and mechanical properties were intermediate between those of the skin and core components alone. Dropped dart impact energy was controlled more by the skin layer than the core. In rigid PVC/GFR‐PVC co‐injected samples, impact energy was 2.5 times greater when GFR‐PVC was the core than when GFR‐PVC was the skin.     

Guinea pig bone marrow cells treated with platelet-activating factor generate factor(s) which affects their DNA synthesis and microbicidal activity

We have previously reported that platelet-activating factor (PAF) induces proliferation and microbicidal activity of guinea pig bone marrow cells. In the present study, we have found that the conditioned medium of PAF- or nonmetabolizable PAF agonist-treated guinea pig bone marrow cells augmented DNA synthesis and induced microbicial activity of bone marrow cells. A PAF specific antagonist, CV-6209, inhibited generation of the active conditioned medium by PAF. Addition of the PAF antagonist only partially suppressed the augmentative effect of the active conditioned medium on DNA synthesis; this is consistent with the fact that, because of the rapid breakdown, no appreciable amount of PAF remained in the conditioned medium of PAF-treated cells. Although mouse bone marrow cells did not respond to PAF unlike guinea pig cells, their DNA synthesis was significantly enhanced by the conditioned medium of PAF-treated guinea pig bone marrow cells. Thus, some newly generated factor(s) distinct from the originally inoculated PAF seemed to modulate the bioactions of PAF on bone marrow cells. An appreciable amount of PAF was produced by calcium ionophore-treated guinea pig bone marrow cells. These findings indicate that PAF synthesized in guinea pig bone marrow cells induces generation in the cells of some factor(s) which affects proliferation or microbicidal activity. Presented at The Third International Conference on Platelet-Activating Factor and Structurally Related Ether Lipids, Tokyo, Japan, May 1989.     

Synthesis of Ba2NaNb5O15 Powders and Thin Films Using Metal Alkoxides

Transparent and highly oriented Ba₂NaNb₅O₁₅ (BNN) thin films have been prepared by using metal alkoxides. A homogeneous precursor solution was prepared by the controlled reaction of NaOC₂H₅, Nb(OC₂H₅)₅, and barium metal. The BNN precursor included a molecular-level mixture of NaNb(OC₂H₅)₆ and Ba[Nb(OC₂H₅)₆]₂ in ethanol. The alkoxy-derived powder crystallized to a low-temperature phase, and then transformed to orthorhombic BNN (tungsten bronze) at 600°C. BNN precursor films on substrates crystallized to orthorhombic BNN at 800°C via the low-temperature phase. Highly (002) oriented BNN films of tungsten bronze structure were successfully prepared on MgO (100) substrates at 700°C by using BNN underlayer.     

Sintering of Al2O3–TiC Composite in the Presence of Liquid Phase

The results obtained from the sintering of Al₂O₃–50TiC (in weight percent) composite in the temperature range from 1650° to 1800°C with addition of Y₂O₃ are presented. Densification is accelerated by the formation of liquid at temperatures above 1750°C, and 99% of theoretical density can be achieved by vacuum sintering at 1800°C for 15 min. The liquid presented at the sintering temperature is crystallized to YAG (Y₃Al₅O₁₂) during cooling.     

Promotion of hydrogen permeation on metal-dispersed alumina membranes and its application to a membrane reactor for methane steam reforming

A mesoporous membrane for selective separation of hydrogen was prepared usingthe sol-gel method. Some metal salts such as RuCl₃, Pd(NH₃)₄Cl₂, RhCl₃,, and H ₂PtCl₆, were added to the boehmite sol and coated on a porous alumina substrate before firing at 500°C. It was foundthat the permeability of hydrogen and the separation factor for a hydrogen-nitrogen gaseous mixture of these metaldispersed membranes exceeded the limitations of the Knudsen diffusion mechanism. Although the gas permeation through a neat alumina membrane is governed by the Knudsen diffusion, the metals dispersed in alumina membranes were effective in promoting hydrogen permeation. These metaldispersed alumina membranes were also used in a membrane reactor for methane steam reforming at low temperature. In the temperature range of 300 to 500°C, the membrane reactor attained a methane conversion twice as high as the equilibrium value of the packed bed catalytic reactor system as a result of the selective removal of hydrogen from the reaction system.     

Relation between crystal structure and lattice oxygen content of sintered reaction-bonded silicon nitride

When reaction-bonded silicon nitride containing MgO/Y₂O₃ additives is sintered at three different temperatures to form sintered reaction-bonded silicon nitride (SRBSN), the thermal conductivity increases with sintering temperature. The β-Si₃N₄ (silicon nitride) crystals of SRBSN ceramics were synthesized and characterized to investigate the relation between the crystal structure and the lattice oxygen content. The hot-gas extraction measurement result and the crystal structure obtained using Rietveld analysis suggested that the unit cell size of the β-Si₃N₄ crystal increases with the decrease in the lattice oxygen content. This result is reasonable considering that the lattice oxygen with the smaller covalent radius substitutes nitrogen with the larger one in the β-Si₃N₄ crystals. The lattice oxygen content decreased with increasing sintering temperature which also correlated with increase in thermal conductivity. Moreover, it is noteworthy from the viewpoint that it may be possible to apply the lattice constant analysis for the nondestructive and simple measurement of the lattice oxygen content that deteriorates the thermal conductivity of the β-Si₃N₄ ceramics.     

An Advanced Oscillation Mixing Method for Improving the Cooling Uniformity in Quenching

In quenching, the cooling uniformity is most important to diminish distortion occurring on work pieces. As a trial to accomplish uniform cooling, therefore, there exist various mixing methods of a quenchant and the quenchant circulation with an external pump has so far been the well accepted mixing method. However, this study proposes an advanced oscillation mixing method that can improve more the cooling uniformity in quenching. The proposed method includes a stirrer in oscillating motion, so that the simultaneous oscillating and mixing movements of the stirrer are considered to provide efecfively the uniform cooling characteristics for the quenchant. In comparison with the case of the circulation pump mixing, the investigation using the oscillation mixing method has demonstrated the following two experimental facts:(1) the short vapor blanket stage caused by the quick breakage of the oil vapor blanket and (2) the reduced variation of the quenching distortion.