Reports of the DAS02 working groups

This document is a collection of four working group reports in the areas of digital libraries, document image retrieval, layout analysis, and Web document analysis. These reports were the outcome of discussions by participants at the Fifth IAPR International Workshop on Document Analysis Systems held in Princeton, NJ on 19-21 August 2002.Published online: 16 March 2004     

Determination of assigned configurational parameters for cross propagation in radical copolymerization of methyl methacrylate and trityl methacrylate

Summary Copolymer of methyl methacrylate-d₈(M₁) with a small amount of trityl methacrylate(M₂) was radically prepared in tetrahydrofuran and converted into the copolymer of methyl methacrylate-d₈ with a small amount of undeuterated methyl methacrylate by the selective hydrolysis of the trityl group and subsequent methylation with diazomethane. From the ¹H NMR spectrum of the derived copolymer the assigned coisotactic parameters ₁₂ and ₂₁ were determined to be 0.14 and 0.61, respectively. This may be the first example of the unequivocal determination of assigned configurational parameters in cross propagation for copolymerization.     

Preparation and Properties of Bi4 − x Nd x Ti3O12 Thin Films by Chemical Solution Deposition

Neodymium-modified Bi₄Ti₃O₁₂, (Bi, Nd)₄Ti₃O₁₂ (BNT) ferroelectric thin films have been prepared on Pt/TiO_x/SiO₂/Si substrates using metal-organic precursor solutions by the chemical solution deposition method. The BNT precursor films crystallized into the Bi layered perovskite Bi₄Ti₃O₁₂ (BIT) as a single-phase above 600C. The synthesized BNT films revealed a random orientation having a strong 117 reflection, whereas non-substituted BIT thin films exhibited a random orientation with strong 00l diffractions. Among Bi_{4 – x}Nd_xTi₃O₁₂ [x = 0.0, 0.5, 0.75, 1.0] thin films, Bi_3.25Nd_0.75Ti₃O₁₂ thin films showed a well-saturated P-E hysteresis loop with the highest P_r (22 C/cm²) and a low E_c (69 kV/cm) at an applied voltage of 5 V. The Nd-substitution with the optimum amount for the Bi site in the BIT structure was effective not only for promoting the 117 preferred orientation but also for improving the microstructure and ferroelectric properties of the resultant films.     

Ultrafast 1D MR thermometry using phase or frequency mapping

Object  

To develop an ultrafast MRI-based temperature monitoring method for application during rapid ultrasound exposures in moving organs.     

波形测量技术的发展趋势--兼谈YOKOGAWADE的示波器发展

本文着重论述了波形测量技术的最新发展趋势。     

Effect of cell structure on oil absorption of highly oil absorptive polyurethane foam for on-site use

This article reports the effect of cell structure on oil absorption of highly oil-absorptive polyurethane foam (ON-PUR), which is suitable for on-site foaming. We have developed ON-PUR as an oil absorbing polyurethane foam using a very reactive recipe. ON-PUR was synthesized by mixing polyol, water, additives, and polymeric diphenylmethane diisocyanate (P-MDI) using a high-pressure foaming machine. Density, airflow, oil absorption of this foam, and cell structure by microscopy were measured. From these results, it was found that the airflow of this foam increased by crushing, and the oil absorption of this foam increased sharply in a narrow airflow range (from 0.1 to 0.8 scfm). This increase is estimated to be due to the decrease of closed cell structures by crushing treatment. Furthermore, we constituted on-site foaming system in bench scale, which was expected to be applicable to on-site preparation of ON-PUR. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65: 179–186, 1997     

Rapid Reconstitution of Biosynthetic Machinery for Fungal Metabolites in Aspergillus oryzae: Total Biosynthesis of Aflatrem

Reconstitution of the biosynthetic machinery for fungal secondary metabolites in Aspergillus oryzae provides an opportunity both for stepwise determination of the biosynthetic pathways and the total biosynthesis of fungal natural products. However, to maximize the utility of the reconstitution system, a simple and rapid strategy for the introduction of heterologous genes into A. oryzae is required. In this study, we demonstrated an effective method for introducing multiple genes involved in the biosynthesis of fungal metabolites by using the expression vectors pUARA2 and pUSA2, each of which contains two cloning sites. The successful introduction of all the aflatrem biosynthetic genes (seven genes in total) after two rounds of transformation enabled the total biosynthesis of aflatrem. This rapid reconstitution strategy will facilitate the functional analysis of the biosynthetic machinery of fungal metabolites.     

Thermal Stability of Hexaaluminate Film Coated on SiC Substrate for High-Temperature Catalytic Application

A coating of barium hexaaluminate (Ba_0.75Al_11.0O_17.25) on an α-SiC substrate and the thermal stability of the formed film were investigated for a high-temperature catalytic application. The film prepared by sol coating consisted of BaAl₂Si₂O₈ and α-Al₂O₃ phases and always contained many cracks or exfoliations after heating at 1200C. A hexaaluminate porous film was successfully formed by slurry coating without void formation at the interface between the film and the substrate and exfoliation due to the formation of the intermediate layer after heating at 1200°C. The microstructure of the film remained unchanged, even after heating at 1300°C.     

Reduction and Sintering of a Nickel–Dispersed-Alumina Composite and Its Properties

High-density nickel–dispersed-alumina (Al₂O₃/nickel) composites with superior mechanical properties were obtained by the hydrogen reduction and the hot pressing of alumina–nickel oxide (Al₂O₃/NiO) mixed powders. The mixtures were prepared by using NiO or nickel nitrate (Ni(NO₃)₂· n H₂O) as a dispersion source of nickel metal. Microstructural investigations of the composite fabricated using nitrate powder revealed that fine nickel particles, } 100 nm in diameter, dispersed homogeneously at the matrix grain boundaries, forming the intergranular nanocomposite. High strength (.1 GPa) and high-temperature hardness were registered for the composite that contained a small amount of nickel dispersion. The ferromagnetic properties of nickel, such as high coercive force, were observed, because of the fine magnetic dispersions, which indicates a functional value of structural composites.