Quantitative structural analysis of twin boundary in alpha-Zn7Sb2O12 using HAADF STEM method

The structure and composition of the 1/4{110} twin boundary in alpha-Zn7Sb2O12 have been determined by using quantitative high-angle annular dark field scanning transmission electron microscopy (HAADF STEM) analysis. The noise in the experimental HAADF STEM images is reduced by using the maximum entropy method and average processing, and the parameters used in dynamical simulations are experimentally determined. From the analysis, it has been found that octahedral sites in the twin boundary slightly shift parallel to the [110] direction, and a reduction of the Sb concentration at the octahedral sites on the plane adjacent to the twin boundary was detected. The reduction was measured from three regions in the same twin boundary, and the Sb concentrations were 4 +/- 3, 8 +/- 3 and 19 +/-2 at% from 33 at%.     

Engineering Transition Metal Layers for Long Lasting Anionic Redox in Layered Sodium Manganese Oxide

Oxygen-redox-based-layered cathode materials are of great importance in realizing high-energy-density sodium-ion batteries (SIBs) that can satisfy the demands of next-generation energy storage technologies. However, Mn-based-layered materials (P2-type Na-poor Na_y[A_xMn_1−x]O₂, where A = alkali ions) still suffer from poor reversibility during oxygen-redox reactions and low conductivity. In this work, the dual Li and Co replacement is investigated in P2-type-layered Na_xMnO₂. Experimentally and theoretically, it is demonstrated that the efficacy of the dual Li and Co replacement in Na_0.6[Li_0.15Co_0.15Mn_0.7]O₂ is that it improves the structural and cycling stability despite the reversible Li migration from the transition metal layer during de-/sodiation. Operando X-ray diffraction and ex situ neutron diffraction analysis prove that the material maintains a P2-type structure during the entire range of Na⁺ extraction and insertion with a small volume change of ≈4.3%. In Na_0.6[Li_0.15Co_0.15Mn_0.7]O₂, the reversible electrochemical activity of Co³⁺/Co⁴⁺, Mn³⁺/Mn⁴⁺, and O^2-/(O₂)^n- redox is identified as a reliable mechanism for the remarkable stable electrochemical performance. From a broader perspective, this study highlights a possible design roadmap for developing cathode materials with optimized cationic and anionic activities and excellent structural stabilities for SIBs.     

Non‐destructive evaluation of fatigue damage and fatigue crack initiation in type 316 stainless steel by positron annihilation line‐shape and lifetime analyses

Rotating bending fatigue tests were conducted using type 316 stainless steel. The fatigue tests were periodically terminated, and fatigue damage and fatigue crack initiation were non‐destructively and sequentially evaluated by positron annihilation line‐shape and lifetime analyses. The counter‐jig and anticoincidence methods were used for positron annihilation line‐shape and lifetime analyses, respectively, to enhance the analytical precision. The fatigue crack lengths were monitored by a plastic replication technique, and related to the parameters in both analyses. S‐parameter obtained in the line‐shape analysis increased with increasing fatigue damage, while it was difficult to detect fatigue crack initiation and subsequent small fatigue crack growth. That was because the precision of line‐shape analysis was limited. On the other hand, both fatigue damage and fatigue crack initiation were successfully detected by lifetime analysis. Positron annihilation lifetime also increased with increasing fatigue damage, and lifetime was longer at the notch root with fatigue crack than at the smooth section without crack. It was considered that the precision of lifetime analysis was high enough to detect high dislocation density areas at the fatigue crack tips.     

Prediction of color changes in acetaminophen solution using the time–temperature superposition principle

A prediction method for color changes based on the time–temperature superposition principle (TTSP) was developed for acetaminophen solution. Color changes of acetaminophen solution are caused by the degradation of acetaminophen, such as hydrolysis and oxidation. In principle, the TTSP can be applied to only thermal aging. Therefore, the impact of oxidation on the color changes of acetaminophen solution was verified. The results of our experiment suggested that the oxidation products enhanced the color changes in acetaminophen solution. Next, the color changes of acetaminophen solution samples of the same head space volume after accelerated aging at various temperatures were investigated using the Commission Internationale de l’Eclairage (CIE) LAB color space (a*, b*, L* and ΔE*ab), following which the TTSP was adopted to kinetic analysis of the color changes. The apparent activation energies using the time–temperature shift factor of a*, b*, L* and ΔE*ab were calculated as 72.4, 69.2, 72.3 and 70.9 (kJ/mol), respectively, which are similar to the values for acetaminophen hydrolysis reported in the literature. The predicted values of a*, b*, L* and ΔE*ab at 40?°C were obtained by calculation using Arrhenius plots. A comparison between the experimental and predicted values for each color parameter revealed sufficiently high R² values (>0.98), suggesting the high reliability of the prediction. The kinetic analysis using TTSP was successfully applied to predicting the color changes under the controlled oxygen amount at any temperature and for any length of time.     

Fabrication of large-volume microfluidic chamber embedded in glass using three-dimensional femtosecond laser micromachining

We report on fabrication of large-volume, square-shaped microfluidic chamber embedded in glass by scanning a tightly focused femtosecond laser beam inside a porous glass immersed in water. After the hollow structure is created in the porous glass substrate, the fabricated glass sample is post-annealed at 1,050°C during which it can be sintered into a compact glass. By the use of this technique, a 1 mm × 1 mm × 100 μm microchamber connected to four microfluidic channels is created inside the transparent glass substrate, showing that our technique allows for fabrication of not only thin channel structures with arbitrary lengths and configurations, but also hollow structures with infinitely large sizes.     

Fabrication of high hardness Ni mold with electroless nickel–boron thin layer

The nickel electroforming method using a high-concentration nickel sulfamate bath is commonly used to fabricate micro metal molds in the LIGA process; however, this method does not produce micro metal molds of sufficient hardness. One means of improving the hardness of micro metal molds made using the nickel electroforming method is to include additives in the nickel plating solution. Another method is nickel alloy plating or a similar technique. In this research, we used a nickel–boron (Ni–B) electroless alloy plating method to obtain a hard nickel plated film having hardness of 832 Hv. It was also ascertained that Ni–B electroless alloy plated film retains its high hardness even during heat treatment in conditions of 250°C for 1 h. To deal with the high stresses developed in high-hardness plated films, we proposed double-layer nickel electroforming. This method is covered and used on conventional nickel electroforming layer by high hardness micro mold. High hardness micro metal mold using double-layer was fabricated by nickel electroforming and Ni–B electroless alloy plating method.     

Particle-based multiple irregular volume rendering on CUDA

In this paper, we describe an improved particle-based volume rendering (PBVR) technique for previewing a large irregular volume dataset using the CUDA architecture. This technique allows for opaque and emissive particles to render translucent volumes without visibility sorting. Our GPU acceleration of PBVR provides the multi-volume rendering feature while remaining compatible with both regular and irregular volumes. We also reduce the memory cost required for storing all sub-pixel values by proposing a pixel repetition technique for a large sub-pixel level. By adjusting the repetition level, we achieved a very smooth level of detail (LOD) control for trading quality for speed. Our work demonstrates a full-detail rendering rate from 5 to 10 fps for irregular volume data with mega-scale cell numbers on an NVIDIA GeForce 8800GTS.     

Solving the irregular strip packing problem via guided local search for overlap minimization

The irregular strip-packing problem (ISP) requires a given set of non-convex polygons to be placed without overlap within a rectangular container having a fixed width and a variable length, which is to be minimized. As a core sub-problem to solve ISP, we consider an overlap minimization problem (OMP) whose objective is to place all polygons into a container with given width and length so that the total amount of overlap between polygons is made as small as possible. We propose to use directional penetration depths to measure the amount of overlap between a pair of polygons, and present an efficient algorithm to find a position with the minimum overlap for each polygon when it is translated in a specified direction. Based on this, we develop a local search algorithm for OMP that translates a polygon in horizontal and vertical directions alternately. Then we incorporate it in our algorithm for OMP, which is a variant of the guided local search algorithm. Computational results show that our algorithm improves the best-known values of some well-known benchmark instances.