Catalytic properties and surface states of La1−x (Th,Sr) x CoO3

The surface chemical states of the perovskite-type thorium- or strontium-doped lanthanum cobalt oxides (La_1–x Th _x CoO₃, La_1–x Sr _x CoO₃) have been investigated using X-ray photoelectron spectroscopy. Catalytic oxidations of CO have been also investigated by flow methods. The ionicity between cobalt and lattice oxygen was increased by substituting thorium for lanthanum, and had a peak atx = 0.02. The catalytic activity also had a peak atx = 0.02. However, the ionicity decreased for the case of strontium substitution, and the activity also decreased.     

Prediction of postoperative pulmonary hemodynamics for the second lobectomy after the contralateral lobectomy

We presented 7 cases who were performed the second lobectomy for the second lung cancer after the first successful lobectomy on the contralateral lung (3 cases for right upper lobectomy + left lower lobectomy and 4 cases for right upper lobectomy + left lower lobectomy). In 6 patients, the predicted postoperative FEV1 estimated by multiplying the preoperative FEV1 by the fraction of perfusion to the contralateral lung was less than 800 ml/m2BSA, which is our first cut-off for identifying lung resection candidates. Unilateral pulmonary arterial occlusion test (UPAO) revealed that total pulmonary vascular resistance (TPVRI) in 3 of those 6 patients was lower than 700 dyne.sec.cm-5/m2BSA, our second cut-off for lung resection. More precise postlobectomy pulmonary hemodynamics in another 3 of those 6 patients were then estimated by adapting selective pulmonary occlusion test (SPAO). Since TPVRI during SPAO was lower than the cut-off value, it was suggested that second lobectomy would be feasible with low incidence of post operative cardiopulmonary complication. There was no serious complications in all 7 cases during their postoperative course. We believe that more precise prediction of postoperative pulmonary hemodynamics by adapting UPAO and SPAO could be one of the tools to minimumize postoperative cardiopulmonary complications in those patients needed second lobectomy for the second lung cancer after the first successful lobectomy on the contralateral lung even though their impaired lung fung function.     

Tumor accumulation of poly(vinyl alcohol) of different sizes after intravenous injection

The body distribution and tumor accumulation of polymers were evaluated using poly(vinyl alcohol) (PVA) which has the simplest chemical structure among water-soluble polymers, similar to poly(ethylene glycol). To study the effect of polymer size on the tumor accumulation, we used not only water-soluble PVA with different molecular weights but also PVA microgels prepared through gamma-irradiation of aqueous PVA solutions. The PVA specimens in the aqueous solution were intravenously injected to mice carrying a tumor mass at their footpad. Both types of PVA (water-soluble and microgel) of larger size were retained in the blood circulation for longer time periods and excreted more slowly from the kidney than those of smaller size. The plasma half-life period of PVA became longer with increasing size both for the water-soluble and microgel PVA, indicating that the body fate of PVA is governed only by the size. Both the water-soluble PVA and PVA microgels were accumulated in tumor tissue to a significantly greater extent than in normal tissue. The size dependence of the plasma half-life period and tumor accumulation was similar between the water-soluble PVA and the PVA microgels and the tumor accumulation became maximum around the size of 60 nm both for water-soluble and microgel PVA. A pharmacokinetical study demonstrated that the tumor uptake rate index of PVA decreased with the increase in PVA size. On the other hand, the greater the size, the larger the value of the area under the blood concentration-time curve (AUC). In addition, the PVA around 60 nm in diameter showed the smallest liver clearance. It was concluded that the balance between the uptake rate and the AUC as well as the liver clearance resulted in the maximum accumulation of PVA with the size of 60 nm.     

Light-intensity dependence in photocatalytic decomposition of water over K4Nb6O17 catalyst

We have measured, for the first time, the light-intensity dependence in photocatalytic decomposition of water over K₄Nb₆O₁₇ In higher light-intensity region, the rate of reaction is proportional to the square root of the light intensity. In lower light-intensity region, on the contrary, the rate is almost linearly proportional to the light intensity. We propose a reaction model whose main path of the reaction loss is the recombination of the charges generated under b and -gap radiation. This model describes the light-intensity dependence of this reaction well.     

Preparation of hydrophilic polyethylene foam of open cell type by radiation grafting of acrylic acid

Hydrophilic polyethylene foam was synthesized by radiation grafting of acrylic acid onto polyethylene foam of open cell type using monomer solution containing Mohr's salt which inhibits homopolymerization of the monomer. The graft foam was easily dyed by cationic dyes and showed excellent moisture regain. The wicking properties were also excellent and were almost the same as those of commercially available PVA foam. The surface resistivity of 10¹⁶ ohm of the original foam decreased to 10⁶ ohm and half decay time of surface charge decreased from 8000 s to 1 s by the grafting, indicating that the grafted foam has excellent antistatic properties.     

Accurate Measurement of Absolute Terahertz Power Using Broadband Calorimeter

This paper presents a highly sensitive terahertz (THz) calorimeter developed using a magnetically loaded epoxy as a broadband absorber. The reflection loss of the absorber, which has a pyramidally textured surface, is less than 0.04, as determined using a THz time-domain spectrometer and a vector network analyzer. The THz calorimeter successfully enabled the measurement of the absolute THz power from a photomixer at microwatt levels at room temperature. The measurement uncertainties at a 95% confidence level were 6.2% for 13 μW at 300 GHz and 5.6% for 1.5 μW at 1 THz, respectively. Details of the evaluation and uncertainty analyses are also presented.     

FEM analysis of contact mechanism in press-forming of lubricant pre-coated steel sheet

This paper describes the contact situation between the die and the lubricant pre-coated steel sheet in the press-forming by using FEM simulation. The FEM simulation is carried out by supposing that the lubricant pre-coated steel sheet consists of the lubrication layer and thick galvanized layer. Both the lubrication layer and galvanized layer are assumed as rigid–plastic material. The variations in the contact situation between the die and the lubricant pre-coated steel sheet are investigated by changing the friction coefficient between the die and lubrication layer, the thickness and hardness of lubrication layer, the velocity ratio of the relative sliding velocity to pressing velocity, etc. The simulated results show that the contact area ratio is influenced largely by the average contact pressure, the velocity ratio, the thickness of lubrication layer, and friction coefficient.     

Rhombic‐Shaped Nanostructures and Mechanical Properties of 2D DNA Origami Constructed with Different Crossover/Nick Designs

DNA origami methods enable the fabrication of various nanostructures and nanodevices, but their effective use depends on an understanding of their structural and mechanical properties and the effects of basic structural features. Frequency‐modulation atomic force microscopy is introduced to directly characterize, in aqueous solution, the crossover regions of sets of 2D DNA origami based on different crossover/nick designs. Rhombic‐shaped nanostructures formed under the influence of flexible crossovers placed between DNA helices are observed in DNA origami incorporating crossovers every 3, 4, or 6 DNA turns. The bending rigidity of crossovers is determined to be only one‐third of that of the DNA helix, based on interhelical electrostatic forces reported elsewhere, and the measured pitches of the 3‐turn crossover design rhombic‐shaped nanostructures undergoing negligible bending. To evaluate the robustness of their structural integrity, they are intentionally and simultaneously stressed using force‐controlled atomic force microscopy. DNA crossovers are verified to have a stabilizing effect on the structural robustness, while the nicks have an opposite effect. The structural and mechanical properties of DNA origami and the effects of crossovers and nicks revealed in this paper can provide information essential for the design of versatile DNA origami structures that exhibit specified and desirable properties.     

Effect of localized KrF excimer laser treatment on fracture behaviors of freestanding <110> and <100> single crystal silicon beams

Microscale silicon structures oriented along <100> and <110> orientations were laser treated with different conditions with the cross section shape and tensile strength investigated after the treatment. Finite element simulation was performed to examine the temperature distribution at different conditions during laser treatment. Using a low energy (1.2 J/cm²) and high tilt angle (65°) led to a more preserved cross section with a slight strength improvement. The strength improvement was limited due to other surfaces that were not affected by laser treatment. An improvement of 30 % in tensile strength was achieved with a higher energy (4 J/cm²) lower tilt angle (45°) treatment that was consistent for different sample orientations. The cross section of the samples treated at such condition was significantly changed however. The effect of sample orientation on fracture behaviour was studied and unstable crack propagation was observed for <100> oriented samples that was more significant after laser treatment.