Present or Past Herbivory: A Screening of Volatiles Released from <Emphasis Type="Italic">Brassica rapa</Emphasis> Under Caterpillar Attacks as Attractants for the Solitary Parasitoid, <Emphasis Type="Italic">Cotesia vestalis</Emphasis>

Females of the solitary endoparasitoid Cotesia vestalis respond to a blend of volatile organic compounds (VOCs) released from plants infested with larvae of their host, the diamondback moth (Plutella xylostella), which is an important pest insect of cruciferous plants. We investigated the flight response of female parasitoids to the cruciferous plant Brassica rapa, using two-choice tests under laboratory conditions. The parasitoids were more attracted to plants that had been infested for at least 6 hr by the host larvae compared to intact plants, but they did not distinguish between plants infested for only 3 hr and intact plants. Although parasitoids preferred plants 1 and 2 days after herbivory (formerly infested plants) over intact plants they also preferred plants that had been infested for 24 hr over formerly infested plants. This suggests that parasitoids can distinguish between the VOC profiles of currently and formerly infested plants. We screened for differences in VOC emissions among the treatments and found that levels of benzyl cyanide and dimethyl trisulfide significantly decreased after removal of the host larvae, whereas terpenoids and their related compounds continued to be released at high levels. Benzyl cyanide and dimethyl trisulfide attracted parasitoids in a dose-dependent manner, whereas the other compounds were not attractive. These results suggest that nitrile and sulfide compounds temporarily released from plants under attack by host larvae are potentially more effective attractants for this parasitoid than other VOCs that are continuously released by host-damaged plants.     

Mechanical and physical characteristics of cellulose‐fiber‐filled polyacetal composites

We investigated the mechanical and physical characteristics of composites composed of polyacetal [alternatively called polyoxymethylene (POM)] and cellulose fiber (CelF) derived from wood pulp [10–52 wt % (9.3–50.1 vol %)] without any fiber surface treatment. The modulus, deflection temperature under load, and thermal conduction coefficient of the POM/CelF composites were effectively enhanced with increasing CelF content, and the composites had an advantage of specific modulus compared to glass fiber (GF)‐filled POM. The flexural modulus of POM/CelF 40 wt % (38.2 vol %) was measured to be about 6 GPa, which was comparable to that of POM/GF 20 wt % (12.1 vol %). In the composites, the CelFs were distributed randomly as monofilaments, and the debonding of the interface between the fibers and POM matrices in the fracture faces was confirmed as less by scanning electron microscopy observation. The POM/CelF composites possessed lower specific wear rates than the POM/GF composites, and they had damping behaviors near that of neat POM. No clear dependence of the melt flow index of the base POM on these characteristics was observed, except on Charpy impact strength. The composites studied here were unique in their performance and ability to be designed in accordance with specific demands, and they could be potential replacements for mineral‐filled and GF‐filled POM composites. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of Vertical Misfit on Screw Joint Stability of Implant-Supported Crowns

The passive fit between prosthesis and implant is a relevant factor for screw joint stability and treatment success. The aim of this study was to evaluate the influence of vertical misfit in abutment-implant interface on preload maintenance of retention screw of implant-supported crowns. The crowns were fabricated with different abutments and veneering materials and divided into 5 groups (n = 12): Gold UCLA abutments cast in gold alloy veneered with ceramic (Group I) and resin (Group II), UCLA abutments cast in titanium veneered with ceramic (Group III) and resin (Group IV), and zirconia abutments with ceramic veneering (Group V). The crowns were attached to implants by gold retention screws with 35-N cm insertion torque. Specimens were submitted to mechanical cycling up to 10⁶ cycles. Measurements of detorque and vertical misfit in abutment-implant interface were performed before and after mechanical cycling. ANOVA revealed statistically significant difference (P < 0.05) among groups for vertical misfit measured before and after mechanical cycling. The abutments cast in titanium exhibited the highest misfit values. Pearson correlation test did not demonstrate significant correlation (P > 0.05) between vertical misfit and detorque value. It was concluded that vertical misfit did not influence torque maintenance and the abutments cast in titanium exhibited the highest misfit values.     

Impregnation of silk sericin into polyester fibers using supercritical carbon dioxide

Silk sericin was impregnated into polyester fabric using supercritical carbon dioxide (SCCO₂) to overcome polyester hydrophobicity. The effects of sericin molecular weight, pH of sericin, solution and cosolvent types on sericin impregnation were investigated. Enzyme‐hydrolyzed, acid‐, based‐hydrolyzed sericin in SCCO₂, and a 30 kDa sericin in SCCO₂ modified with cosolvents such as water, methanol, 1‐propanol, and acetone; and a modifier: sodium hydroxide solution were used in this work. Impregnation of sericin in polyester was indicated by Fourier transform infrared spectrophotometry (FTIR) and dyeing with acid dye. Degradation of polyester fibers during SCCO₂ process was indicated by scanning electron microscopy (SEM). Methylene blue dyeing was used to realize carboxyl group in polyester. The results showed no impregnation of sericin into polyester by using SCCO₂ modified with cosolvents. However, sericin was impregnated into modified surface polyester since hydrophilic groups such as carboxyl and hydroxyl groups were regenerated by alkaline hydrolysis. Samples impregnated with hydrolyzed sericin showed high color strength of Supranolechtbordeaux B acid dye. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Self-assembly of nano-sized arrays on highly oriented thin films of poly(tetrafluoroethylene)

Self-assembly of nano-sized arrays by casting a dilute solution of a guest material on the friction-transferred poly(tetrafluoroethylene) (FT-PTFE) substrate was newly discovered. Long axis of the rod-like structures forming the arrays is aligned perpendicular to the chain direction of FT-PTFE, and accordingly, the arrays are highly anisotropic. This phenomenon was observed for aqueous or organic solutions of polymers or organic materials. Each rod-like structure forming the arrays is composed of small grains. The arrays in question are formed regardless to the crystallinity of the guest materials. The formation mechanism of the nano-sized arrays is still unclear. However, we guess that they are formed as a result of microscopic flow pattern at the edge of the solution film. The arrays in question may be a new type of dissipative structure.     

Permeation and separation of organic liquid mixtures through liquid-crystalline polymer networks

A side-chain liquid-crystalline polymer (LCP) was synthesized by the addition of the mesogenic monomer to poly(methyl siloxane) in presence of a Pt-catalyst. When an aqueous solution of 10wt% ethanol was permeated through a LCP membrane by pervaporation at various temperatures, the permeation rate increased with increasing temperature and drastically changed at glass-nematic (Tg) and nematic-isotropic (TNI) transition temperatures of the LCP membrane. The LCP membrane exhibited the waterpermselectivity in the glassy and liquid-crystalline states. The ethanol concentration in the permeate increased with increasing permeation temperature and the LCP membrane changed from the waterpermselectivity to the ethanol-permselectivity around TNI. These results suggested that the permselectivity was influenced by the change of the LCP membrane structure, that is, its state transformation. It was found that a balance of the orientation of mesogenic groups and flexibility of siloxane chains is very important for the permeability and selectivity.     

Lubricity of volatile lubricants in sheet metal rolling

A series of experiments is carried out by using a rolling type tribometer to investigate the lubricity of the volatile lubricants at high speed forming. The roll material is the die steel alloy SKD11, and the workpiece material is the mild steel SPCE with a rough surface and the aluminum alloy A3004 with a smooth surface. Experimental results show that the friction coefficient decreases with increasing working velocity for both SPCE and A3004, in any lubricant. With an increase of reduction in thickness, the friction coefficient decreases for SPCE, but increases for A3004. Some volatile lubricants have the same lubricity as the generally used mineral oil with low-viscosity by judging from the value of friction coefficient, the surface appearance of rolled workpiece and the roll surface damage.     

Mechanism of Ca2+ increase in myoblasts derived from chicken embryos

The mechanism of intracellular calcium ions (Ca(2+)) increase in chicken myoblasts was studied using histological, immunohistochemical, immunoblotting and Ca(2+) imaging techniques. Mononuclear myoblasts at embryonic day 12 (E12) contained myofibrils in the peripheral cytoplasm, and the sarcoplasmic reticulum was observed in the cytoplasm. Several Ca(2+)-related receptors, namely acetylcholine (ACh) receptors, dihydropyridine receptors (DHPRs) and ryanodine receptors (RyRs), were detected in the tissue as early as E12. Western blotting analyses detected one band corresponding to RyR subtype 3 (RyR3) at E12 and two bands corresponding to RyR1 and RyR3 after E13. Ca(2+) imaging of mononuclear myoblasts in vitro revealed an intense Ca(2+)-increase response to ACh stimulation, and this effect was abolished after EGTA addition to the culture medium. Nifedipine treatment also led to a lack of Ca(2+) increase in response to ACh stimulation, while ryanodine treatment led to a weak Ca(2+)-increase response. On the other hand, multinuclear myoblasts showed a Ca(2+)-increase response to ACh stimulation in the presence of not only EGTA but also nifedipine, although ryanodine treatment led to a lack of Ca(2+) increase. These results suggest that the mechanism of Ca(2+) increase in mononuclear myoblasts involves extracellular Ca(2+) entry through DHPRs, which is amplified by Ca(2+) release from the cytoplasmic Ca(2+) store, while multinuclear myoblasts mainly depend on Ca(2+) release from the cytoplasmic Ca(2+) store.     

Finite-difference time-domain analysis of time-resolved reflectance from an adult head model composed of multilayered slabs with a nonscattering layer

Finite-difference time-domain (FDTD) analysis has been used to predict the time-resolved reflectance from multilayered slabs with a nonscattering layer. Light propagation across the nonscattering layer was calculated based on the light intensity characteristics along a ray in free space. Additional equivalent source functions due to light from scattering regions across the nonscattering region were introduced into the diffusion equation and an additional set of the diffusion equation was solved by FDTD analysis by employing new boundary conditions. The formulation was used to calculate time-resolved reflectances of three- and four-layered slabs containing a nonscattering layer. The received light intensity and the mean time of flight estimated from the time-resolved reflectance are in reasonable agreement with previously reported experimental data and Monte Carlo simulations.     

Electrophoretic cell manipulation and electrochemical gene-function analysis based on a yeast two-hybrid system in a microfluidic device

A novel microfluidic device with an array of analytical chambers was developed in order to perform single-cell-based gene-function analysis. A series of analytical processes was carried out using the device, including electrophoretic manipulation of single cells and electrochemical measurement of gene function. A poly(dimethylsiloxane) microstructure with a microfluidic channel (150 microm in width, 10 microm in height) and an analytical chamber (100 x 20 x 10 microm (3)) were fabricated and aligned on a glass substrate with an array of Au microelectrodes. Two microelectrodes positioned in the analytical chamber were employed as a working electrode for the electrophoretic manipulation of cells and electrochemical measurements. A yeast strain ( Saccharomyces cerevisiae Y190) carrying the beta-galactosidase reporter gene was used to demonstrate that the device could detect the enzyme. Target cells flowing through the main channel were introduced into the chamber by electrophoresis using the ground electrode laid on the main channel. When the cell was treated with 17beta-estradiol, gene expression was triggered to produce beta-galactosidase, catalyzing the hydrolysis of p-aminophenyl-beta- D-galactopyranoside to form p-aminophenol (PAP). The enzymatically generated PAP was detected by cyclic voltammetry and amperometry at the single-cell level in the chamber of the device. Generator-collector mode amperometry was also applied to amplify the current response originating from gene expression in the trapped single cells. After electrochemical measurement, the trapped cells were easily released from the chamber using electrophoretic force.