Near-infrared imaging of water in a polymer electrolyte membrane during a fuel cell operation

A novel technique of spectroscopic imaging using a near-infrared (NIR) laser sheet beam was developed for visualization of liquid water in a proton-exchange membrane (PEM) sandwiched between two opaque electrodes set in a polymer electrolyte fuel cell (PEFC). In-plane two-dimensional distribution of water in the thin membrane was clearly visualized during the fuel cell operation. Under the condition of fuel feeding into the PEFC without humidification, water was generated by the fuel cell reaction in the whole electrode area. In contrast, under the condition of fuel feeding with humidification, the PEM got wet in the vicinity of a gas flow field locally.     

成型冶金灰脱硫剂对烟气脱硫及其再生的研究

冶金灰(MD)因含大量的金属氧化物而有很强的脱硫能力.但是,MD颗粒细小,易被气流吹走,不能直接应用.必须将MD成型为有一定尺寸和足够机械强度后才能采用.研究了成型冶金灰脱硫剂(DSMD)的成型、脱硫和再生.实验结果指出,首先将诸如粘土,水玻璃,聚磷酸钠等粘结剂,水和MD混合,混合质量比MD:粘土:水玻璃:聚磷酸钠:水为100:3.3:3.3:3.3:5.0,然后将混合粉末压制成圆柱状块体,最后在973 K时结烧3 h.DsMD在烟气脱硫(FGD)过程中的脱硫率和MD相近,而且经过几次连续的脱硫-再生循环后,脱硫率仍保持稳定.此外,当DSMD未被贯透和DSMD的硫容量到达约5～6 mol/kg(＞773 K)之前,烟气出口处的H2S浓度可保持在小于10 mg/m3的水平.     

Properties and potential applications of carbon microcoils/nanocoils

The carbon microcoils (CMCs) were prepared by the Ni-catalyzed pyrolysis of acetylene containing a small amount of H₂S, the morphology and some properties of the CMCs were examined, and the potential applications were discussed. It was found that super-elastic CMCs, which could be extended and contracted by 3–15 times of the original coil length, could be obtained by controlling the reaction conditions. The electrical resistivity (R) of these super-elastic CMCs increased by extending and decreased by contracting. Furthermore, it was found that inductance (L) and capacitance (C) extensively changed with extending and contracting motions. Accordingly, CMCs could be used as high sensitive tactile sensors based on the noble LCR composite hybrid resonance, as well as in MEMS.     

Fine structure of tooth enamel in the yellowing human teeth: SEM and HRTEM studies

Objective : The aim of this study was to clarify an influence of the fine structure of human tooth enamel to the yellowing teeth. Materials and methods : Sound maxillary first premolars of 15–50‐year‐old females that were extracted for the orthodontic treatment were used as the test samples. The tooth enamel sections of these teeth that prepared by ion polishing were observed by scanning electron microscopy (SEM). Furthermore, the fine structure of substance filling the inter‐rod spaces was analyzed by high resolution transmission electron microscopy (HRTEM). Results : In white tooth, the inter‐rod spaces were observed at the width of about 0.1 μm, while in yellow tooth, the inter‐rod spaces were not clearly observed by SEM. HRTEM observations revealed for the first time that the inter‐rod spaces were filled with fine particles of poorly crystallized hydroxyapatite in the yellow tooth. In yellow tooth, it was considered that the color of the inner dentin was recognized due to the decrease of light scattering by filling the tooth enamel inter‐rod spaces. The generation of particles in the tooth enamel inter‐rod spaces was considered to be caused by the long‐time progression of calcification. Conclusions : These results suggested that the change in fine structure, filling in inter‐rod spaces of tooth enamel, was related to progression of calcification in the inter‐rod spaces with advancing age and one of the factors of yellowness of human tooth. Microsc. Res. Tech. 79:14–22, 2016. © 2015 Wiley Periodicals, Inc.     

Surface properties of carbon micro-coils oxidized by a low concentration of oxygen gas

Vapor-grown carbon micro-coils were oxidized under a low O₂ flow-rate for introducing oxygen-containing functional groups on the surface. The surface characteristics were then examined. The O1s/C1s intensity ratios of the XPS spectra measured on the surface increased on using the oxidation treatment. The maximum O1s/C1s ratio of 11.4 at.% was obtained under the following conditions: (a) the flow-rate of the mixed gas of O₂+Ar (O₂/Ar=1/10) was 82.5 sccm; (b) the oxidation temperature was 600°C; and (c) the treatment time was 30 min. The maximum O1s/C1s ratio is about 3.5 times that of the source carbon coils. The specific surface area significantly increased due to the oxidation treatment and attained a maximum value of 1050 m² g⁻¹, which is about 10 times that of the source carbon coils. As the specific surface area increased, the surface morphology of the carbon coils became more complicated on a nanometer scale.     

Stabilization of Hydroxynitrile Lyases from Two Variants of Passion Fruit,Passiflora edulis Sims and Passiflora edulis Forma flavicarpa,by C-Terminal Truncation

Because the synthesis of chiral compounds generally requires a broad range of substrate specificity and stable enzymes, screening for better enzymes and/or improvement of enzyme properties through molecular approaches is necessary for sustainable industrial development. Herein, the discovery of unique hydroxynitrile lyases (HNLs) from two species of passion fruits, Passiflora edulis forma flavicarpa (yellow passion fruit, PeHNL-Ny) and Passiflora edulis Sims (purple passion fruit, PeHNL-Np), isolated and purified from passion fruit leaves is reported. These are the smallest HNLs (comprising 121 amino acids). Amino acid sequences of both enzymes are 99 % identical; there is a difference of one amino acid in a consensus sequence. PeHNL-Np has an Ala residue at position 107 and is nonglycosylated at Asn105. Because it was confirmed that natural and glycosylated PeHNL-Ny showed superior thermostability, pH stability, and organic tolerance to that of PeHNL-Np, it has been speculated that protein engineering around the only glycosylation site, Asn105, located at the C-terminal region of PeHNL-Ny, might contribute to the stabilization of PeHNL. Therefore, the focus is on improved stability of the nonglycosylated PeHNL by truncating its C-terminal region. The C-terminal-truncated PeHNLΔ₁₀₇ was obtained by truncating 15 amino acids from the C terminus followed by expression in Escherichia coli. PeHNLΔ₁₀₇ expressed in E. coli was not glycosylated, and showed improved thermostability, solvent stability, and reusability similar to that of the wild-type glycosylated form of PeHNL expressed in Pichia pastoris. These data reveal that the lack of the high-flexibility region at the C terminus of PeHNL might be a possible reason for improving the stability of PeHNL.     

Structural advantages of rectangular-like channel cross-section on electrical characteristics of silicon nanowire field-effect transistors

We have experimentally demonstrated structural advantages due to rounded corners of rectangular-like cross-section of silicon nanowire (SiNW) field-effect transistors (FETs) on on-current (I_ON), inversion charge density normalized by a peripheral length of channel cross-section (Q_inv) and effective carrier mobility (μ_eff). The I_ON was evaluated at the overdrive voltage (V_OV) of 1.0 V, which is the difference between gate voltage (V_g) and the threshold voltage (V_th), and at the drain voltage of 1.0 V. The SiNW nFETs have revealed high I_ON of 1600 μA/μm of the channel width (w_NW) of 19 nm and height (h_NW) of 12 nm with the gate length (L_g) of 65 nm. We have separated the amount of on-current per wire at V_OV = 1.0 V to a corner component and a flat surface component, and the contribution of the corners was nearly 60% of the total I_ON of the SiNW nFET with L_g of 65 nm. Higher Q_inv at V_OV = 1.0 V evaluated by advanced split-CV method was obtained with narrower SiNW FET, and it has been revealed the amount of inversion charge near corners occupied 50% of all the amount of inversion charge of the SiNW FET (w_NW = 19 nm and h_NW = 12 nm). We also obtained high μ_eff of the SiNW FETs compared with that of SOI planar nFETs. The μ_eff at the corners of SiNW FET has been calculated with the separated amount of inversion charge and drain conductance. Higher μ_eff around corners is obtained than the original μ_eff of the SiNW nFETs. The higher μ_eff and the large fractions of I_ON and Q_inv around the corners indicate that the rounded corners of rectangular-like cross-sections play important roles on the enhancement of the electrical performance of the SiNW nFETs.     

In situ visualization of degradation of silicon field emitter tips

This paper deals with the simultaneous observation of both the electron field emission from nanoscopic tips by electrical means and their structural shape change by an ultra‐high resolution transmission electron microscope (TEM). Nanoneedles with sharp tips of radius in the nanometer range were fabricated with semiconductor micromachining technology. A correlation between the electron field emission characteristics and the structural change of the emitter tip was clearly observed. Copyright © 2007 Institute of Electrical Engineers of Japan© 2007 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.