MIPAS-ENVISAT limb-sounding measurements: trade-off study for improvement of horizontal resolution

The Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) is a limb-scanning spectrometer that has operated onboard the Environmental Satellite since the end of March 2002. Common features of limb-scanning experiments are both high vertical resolution and poor horizontal resolution. We exploit the two-dimensional geo-fit retrieval approach [Appl. Opt. 40, 1872-1875 (2001)] to investigate the possibility of improving the horizontal resolution of MIPAS measurements. Two different strategies are considered for this purpose, one exploiting the possibility (offered by the geo-fit analysis method) for an arbitrary definition of the retrieval grid, the other based on the possibility of saving measurement time by degrading the spectral resolution of the interferometer. The performances of the two strategies are compared in terms of the trade-off between the attained horizontal resolution and the retrieval precision. We find that for ozone it is possible to improve by a factor of 2 the horizontal resolution, which in the nominal measurement plan is approximately 530 km. This improvement corresponds to a degradation of the retrieval precision, which on average varies from a factor of 1.4 to 2.5, depending on the adopted spectral resolution.     

Aerosol lidar intercomparison in the framework of the EARLINET project. 3. Raman lidar algorithm for aerosol extinction, backscatter, and lidar ratio

An intercomparison of the algorithms used to retrieve aerosol extinction and backscatter starting from Raman lidar signals has been performed by 11 groups of lidar scientists involved in the European Aerosol Research Lidar Network (EARLINET). This intercomparison is part of an extended quality assurance program performed on aerosol lidars in the EARLINET. Lidar instruments and aerosol backscatter algorithms were tested separately. The Raman lidar algorithms were tested by use of synthetic lidar data, simulated at 355, 532, 386, and 607 nm, with realistic experimental and atmospheric conditions taken into account. The intercomparison demonstrates that the data-handling procedures used by all the lidar groups provide satisfactory results. Extinction profiles show mean deviations from the correct solution within 10% in the planetary boundary layer (PBL), and backscatter profiles, retrieved by use of algorithms based on the combined Raman elastic-backscatter lidar technique, show mean deviations from solutions within 20% up to 2 km. The intercomparison was also carried out for the lidar ratio and produced profiles that show a mean deviation from the solution within 20% in the PBL. The mean value of this parameter was also calculated within a lofted aerosol layer at higher altitudes that is representative of typical layers related to special events such as Saharan dust outbreaks, forest fires, and volcanic eruptions. Here deviations were within 15%.     

High-transfer-rate high-capacity holographic disk data-storage system

We describe the design and implementation of a high-data-rate high-capacity digital holographic storage disk system. Various system design trade-offs that affect density and data-rate performance are described and analyzed. In the demonstration system that we describe, high-density holographic recording is achieved by use of high-resolution short-focal-length optics and correlation shift multiplexing in photopolymer disk media. Holographic channel decoding at a 1-Gbit/s data rate is performed by custom-built electronic hardware. A benchmark sustained optical data-transfer rate of 10 Gbits/s has been successfully demonstrated.     

Changes in the luminescence between dried and wet bacillus spores

Fluorescence has been suggested as a method with which to detect and identify bacterial spores. To better understand the nature of the fluorescence signal, we observed the intrinsic steady-state fluorescence and phosphorescence spectra of Bacillus globigii (BG) in both dried and aqueous forms. In vitro, dried, and suspension forms of BG were measured at room temperature in 300-600-nm excitation wavelengths. Also, the phosphorescence of dry BG spores was measured at room temperature at 300-600-nm excitation wavelengths. The wet BG spores exhibited a strong maximum in their fluorescence spectrum, with the peak excitation wavelength near 300 nm and emission wavelength near 400 nm. When the BG was dried, this peak shifted to an approximately 450-nm excitation maximum and an 500-nm emission maximum. The difference between the wet and the dry spore fluorescence spectra cannot be explained by the phosphorescence of the dry spores. Other changes must take place when the spores are wet to account for the large changes observed in the spectrum.     

SU5: a calibrated variable-polarization synchrotron radiation beam line in the vacuum-ultraviolet range

SU5 is a high-resolution variable-polarization synchrotron radiation (SR) beam line with which linear and circular dichroism experiments are performed in the vacuum ultraviolet (VUV) range (5-40eV), based on an electromagnetic crossed undulator called the Onduleur Plan/Helicoidal du Lure à Induction Electromagnétique (OPHELIE). To get precise knowledge of the polarization state of the emitted SR and to take into account the polarization transformations induced by reflection on the various optics, we set up an in situ VUV polarimeter to provide a precise and complete polarization analysis of the SR atthe sample location. The overall measured polarization performances were highly satisfactory, with measured linear polarization rates of more than 98% (83%) in the vertical (horizontal) linear polarization mode and an average 92.1% (95.2%) circular polarization rate for the right- (left)-handed circular polarization mode, which, to our knowledge, are the highest reported values in the VUV range. Despite some uneven photon energy efficiency, the OPHELIE crossed undulator behaves as expected in terms of polarization, permitting full control of the emitted polarization by manipulation of the vertical-to-horizontal magnetic field ratio (rho(und)) and the relative longitudinal phase (phi(und)).     

Aerosol lidar intercomparison in the framework of the EARLINET project. 1. Instruments

In the framework of the European Aerosol Research Lidar Network to Establish an Aerosol Climatology (EARLINET), 19 aerosol lidar systems from 11 European countries were compared. Aerosol extinction or backscatter coefficient profiles were measured by at least two systems for each comparison. Aerosol extinction coefficients were derived from Raman lidar measurements in the UV (351 or 355 nm), and aerosol backscatter profiles were calculated from pure elastic backscatter measurements at 351 or 355, 532, or 1064 nm. The results were compared for height ranges with high and low aerosol content. Some systems were additionally compared with sunphotometers and starphotometers. Predefined maximum deviations were used for quality control of the results. Lidar systems with results outside those limits could not meet the quality assurance criterion. The algorithms for deriving aerosol backscatter profiles from elastic lidar measurements were tested separately, and the results are described in Part 2 of this series of papers [Appl. Opt. 43, 977-989 (2004)]. In the end, all systems were quality assured, although some had to be modified to improve their performance. Typical deviations between aerosol backscatter profiles were 10% in the planetary boundary layer and 0.1 x 10(-6) m(-1) sr(-1) in the free troposphere.     

Sellmeier's equation and the expression of the thermal refractive-index coefficient for a Nd0.007Gd0.993VO4 crystal

The principal refractive indices of a Nd0.007Gd0.993VO4 crystal for wavelengths of 0.488, 0.6328, 1.064, 1.0795, and 1.3414 microm under the temperature range of 20-170 degrees C are measured by the autocollimation method, and the Sellmeier's equation and the expression of the thermal refractive-index coefficient are then obtained. The reliability of these results is checked by comparing the calculated values with the measured values for the measured wavelengths and the temperature region, as well as with the published values by Studenikin et al. [Quantum Electron. 25, 1162-1165 (1995)] for wavelengths of 0.491, 0.546, 0.578, 0.632, 0.808, and 1.062 microm at 20 degrees C. In addition, the birefringence and the thermal coefficient of the birefringence were obtained by measured results. The results show that the birefringence is larger than that of a YVO4 crystal and that the thermal coefficient of birefringence is less than that of a YVO4 crystal. Therefore it can be expected that the GdVO4 crystal is not only an excellent laser crystal but also an excellent birefringent crystal used in a modern optical transmission system as a passive fiber-optic component.     

Characterization of aqueous and solid inclusion complexes of diuron and isoproturon with beta-cyclodextrin

The interaction of diuron and isoproturon herbicides with beta-cyclodextrin is conducive to the formation of inclusion compounds in aqueous solution as well as in the solid state. The physico-chemical study of these complexes was carried out by various analytical techniques such as ultraviolet (UV), Fourier transform infrared (FT-IR), Raman, X-ray diffraction, and 1H-NMR (nuclear magnetic resonance) spectroscopies. The existence of inclusion complexes in water solution between the beta-cyclodextrin and each of the herbicides was revealed by electronic absorption and 1H-NMR spectroscopies. A 1:1 stoichiometry was determined for both complexes in aqueous medium from UV absorption spectra by using the Benesi-Hildebrand method; the relative stability constants at room temperature were calculated at 2700 +/- 300 L mol(-1) and 750 +/- 50 L mol(-1) for isoproturon and diuron, respectively. In the solid state, inclusion processes with beta-cyclodextrin were characterized by means of infrared and Raman techniques and confirmed by X-ray diffraction spectra.     

In-line reaction monitoring of a methyl methacrylate and N, N-dimethylacrylamide copolymerization reaction using near-infrared spectroscopy

Fast and accurate monitoring of monomer concentration during copolymerization reactions is of much interest. It is known that near-infrared spectroscopy (NIRS) can be used to monitor polymerization reactions. Here, a free radical solution copolymerization reaction between methyl methacrylate and N,N-dimethylacrylamide is considered. NIR spectra were measured in-line with a transflectance probe. The spectra of both involved monomers are very similar, making monitoring with NIRS challenging. It is shown that the NIRS calibration can be set up with only a few (5) off-line measured mixtures. Several validation methods for such a NIRS calibration model are discussed and tested. NIRS is used to follow conversion of the two monomers in a copolymerization reaction on-line.     

Stigmatic spectrometers for extended sources: design with toroidal varied-line-space gratings

Performances are presented of three classes of imaging slit spectrometers for extended sources with aberration-corrected gratings. A general analytical expression for minimizing off-axis grating aberrations is obtained, and it is demonstrated that these aberrations are minimized when the spectrometer is operated at a magnification higher than unity. Classical designs with toroidal uniform-line-spaced (TULS) or spherical varied-line-space (SVLS) gratings are compared with a new class of designs that utilize toroidal varied-line-space (TVLS) gratings. Although TULS and SVLS designs with two stigmatic points can be designed to operate at near-unity magnification with excellent on-axis spectral and spatial resolutions, they cannot be made to satisfy the general off-axis condition, and so their off-axis performances are not optimum. On the contrary TVLS designs with two stigmatic points can be operated at almost any magnification, thus satisfying the off-axis condition perfectly. Such designs are suitable for imaging spectrometer observations that require an extended field of view.