Martensitic transformation in alloys of the system TiNi-TiCu prepared by ultrarapid melt cooling

Conclusion In alloys of the TiNi-TiCu system prepared in the form of thin tapes by ultrarapid melt cooling the B2-phase, which is unstable towards martensitic transformation B2B19, contains up to 35% Cu, whereas in bulk alloys prepared in the form of an ingot cooled at normal rates it contains about 10% Cu close to the M_S. In alloys containing up to 35% Cu there are no untransformed brittle phases preventing development of martensitic transformation throughout the volume of the material. The structure of alloys is quite uniform, particularly those obtained by crystallizing from the amorphous condition, and the grain size of the high-temperature phase is a fraction of a micron. The fine structure of alloys close to a globular at a high cooling rate. Thus, range of practically important alloys of the B2 type with inelastic behavior effects, e.g., the shape memory effect, is considerably expanded.Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 11, pp. 38–41, November, 1988.     

Population turnaround in the Canadian inner city: contextual factors and social consequences

"The paper begins with a brief review of the theoretical arguments and empirical evidence that might be used to explain the emergence, sources and spatial variations of inner-city repopulation. The discussion then examines the various forms of property development that underlie the process of repopulation and the possible origins and potential impacts of each form. Examples are introduced to illustrate the trends and relationships involved, drawing on selective references from North American and European cities, but with special emphasis on Canadian cities and the recent Toronto experience. The paper concludes with a brief assessment of the significance of these processes for understanding the changing residential functions and social environments of the inner city."     

Effect of polyvitamin preparations on blood coagulation in experimental hypercoagulation]

The influence of polyvitamin compounds on the course and outcome of experimental hypercoagulemia was studied. "Hendevitum", "Aerovitum" and "Undevitum" proved to be most effective in reducing negative results of thromboplastemia. "Glutamevitum" was insignificantly effective, while "Quadevitum" and "Complevitum" did not reduce animals' death rate after intravascular injection of thromboplastin in LD50. Positive effects of polyvitamin compounds might be associated with their capacity for stimulating anticoagulation potential, especially, in accelerated continuous intravascular blood coagulation.     

Crystal structure of synthesized CuGaTe2 determined by X-ray powder diffraction using the Rietveld method

A full profile X-ray powder diffraction structure refinement has been carried out on a sample of synthesized CuGaTe₂ using graphite monocromatized CuK step-scan data and a profile shape of the Pearson VII type. The most satisfactory convergence was achieved at R _p = 0.0666, R _wp = 0.0884, R _B = 0.0106 and R _F = 0.0102. The derived structural parameters at 26.5°C are: a = 0.602348(7), c = 1.193979(2) nm and x(Te) = 0.256(6). The ratio between lattice parameters, = c/2a = 0.9911 (0), differs from 1.0, indicating a tetragonal distortion, and non-ideal anion displacements, x(Te)1/4, is manifested by the existence of bond alternation of Cu-Te and Ga-Te with interatomic distances of 0.262(5) and 0.2578(5) nm, respectively. These results show a light tetrahedral deformation produced by four-fold tetrahedra of the copper cation in the CuGaTe₂ chalcopyrite-type structure.     

Vapor pressure measurements of para-hydrogen adsorbed on exfoliated graphite

Monolayer isotherms were measured for 15, 18, and 20 K for para-hydrogen adsorbed on exfoliated graphite foam, and for the second, third, and fourth layers in the temperature interval of 8 to 20 K, using the standard volumetric method. From the data, the isosteric heat of adsorption, molar entropies and internal energies were obtained as a function of coverage. The values for coverages above the third layer were compared to those at the p-H₂ bulk triple point, showing that, within our experimental uncertainty, the results are closer to the values of bulk solid para-hydrogen. Critical temperatures for the second and third layers and the triple point temperature for the second layer, were determined, yielding values of T_c2 = (10.0±0.1) K, T_c3 = (11.0±0.5) K and T_t2 = (6.5±0.1) K respectively. Features occurring along the monolayer coverages are compared to transitions which occur in the para-hydrogen phase diagrams adsorbed on graphite, obtained from heat capacity measurements by other authors. From the isotherms, compressibilities were calculated as a function of coverage for several temperatures. Whenever possible the obtained results were compared to existing data in the literature.     

Influence of structural factors on the macro- and micromechanisms of fracture of austenitic dispersion-hardening alloys with an interrupted type of decomposition. Report 1

The commercial alloy 36NKhTYu in various structural conditions differing in the type of decomposition, grain size, and degree of dispersion of Y'- and -phase hardening particles was investigated by high-voltage electron microscopy and determination of the mechanical properties in tension in fatigue tests. It was established that in the alloy with the original coarse grain size regardless of the type of structure being formed and the form of loading, fracture is primarily ductile, occurring by a dislocation-shear mechanism. The comparison of structures of different type that was made showed that the structure with interrupted precipitation of -phase has the highest fracture energy requirement as the result of the presence of plastic interlamellar layers, providing effective dissipation of the energy supplied in loading. Deformation and fracture of the fragmented and ultradispersed structures is controlled by collective rotational processes.Translated from Problemy Prochnosti, No. 10, pp. 23–28, October, 1992.     

Application of the monte carlo method in the processing of experimental data on dynamic deformation of materials

The article presents a method of processing the recorded diagram of deformations vs time t for the purpose of determining the time-dependent change of strain rate and acceleration. The method is based on the utilization of data of statistical tests (the Monte Carlo method) and the least squares method applied to the deviations of the functions (t) from the experimental curve at the specified number of points.Translated from Problemy Prochnosti, No. 8, pp. 20–22, August, 1992.     

Threshold phenomena in the excitation spectrum of liquid 4He

The elementary theory of threshold phenomena in the excitation spectrum of superfluid ⁴He is presented. The multiphonon threshold in the initial part of the spectrum and the two-roton threshold at energy 2 are discussed.