Sintering,high temperature strength and oxidation resistance of liquid-phase-pressureless-sintered SiC–AlN ceramics with addition of rare-earth oxides

SiC–AlN composites can be pressureless sintered with the addition of rare-earth oxides (RE = Y, Yb, Er, Lu, Ho, Sm, Ce) and without protective powder bed. Sintered bodies showed high density (≥97% T.D.) and were mainly composed by 2H SiC–AlN solid solution with additive containing grain boundary phases. The high temperature strength and oxidation resistance of the composites were also investigated and correlated with the cationic radii of the oxide additives. The flexural strength at 1500 °C increased from 269 MPa to 587 MPa as direct consequence of the rare-earth cationic radius decrease. The specific weight gain during oxidation at 1500 °C for 200 h showed the same behaviour, decreasing from 12.60 mg/cm² to 3.13 mg/cm².     

Unified Integral Transforms Algorithm for Solving Multidimensional Nonlinear Convection-Diffusion Problems

The present work summarizes the theory and describes the algorithm related to an open-source mixed symbolic-numerical computational code named unified integral transforms (UNIT) that provides a computational environment for finding hybrid numerical-analytical solutions of linear and nonlinear partial differential systems via integral transforms. The reported research was performed by employing the well-established methodology known as the generalized integral transform technique (GITT), together with the symbolic and numerical computation tools provided by the Mathematica system. The main purpose of this study is to illustrate the robust precision-controlled simulation of multidimensional nonlinear transient convection-diffusion problems, while providing a brief introduction of this open source implementation. Test cases are selected based on nonlinear multidimensional formulations of Burgers’ equation, with the establishment of reference results for specific numerical values of the governing parameters. Special aspects in the computational behavior of the algorithm are then discussed, demonstrating the implemented possibilities within the present version of the UNIT code, including the proposition of a progressive filtering strategy and a combined criteria reordering scheme, not previously discussed in related works, both aimed at convergence acceleration of the eigenfunction expansions.     

Pharmacological Evaluation and Preliminary Pharmacokinetics Studies of a New Diclofenac Prodrug without Gastric Ulceration Effect

Long-term nonsteroidal anti-inflammatory drugs (NSAIDs) therapy has been associated with several adverse effects such as gastric ulceration and cardiovascular events. Among the molecular modifications strategies, the prodrug approach is a useful tool to discover new safe NSAIDs. The 1-(2,6-dichlorophenyl)indolin-2-one is a diclofenac prodrug which demonstrated relevant anti-inflammatory properties without gastro ulceration effect. In addition, the prodrug decreases PGE₂ levels, COX-2 expression and cellular influx into peritoneal cavity induced by carrageenan treatment. Preliminary pharmacokinetic studies have shown in vivo bioconversion of prodrug to diclofenac. This prodrug is a new nonulcerogenic NSAID useful to treat inflammatory events by long-term therapy.     

Immunophenotypic,immunocytochemistry, ultrastructural,and cytogenetic characterization of mesenchymal stem cells from equine bone marrow

The aim of this study was to isolate, culture, and characterize mesenchymal stem cells (MSCs) from horse bone marrow (BM) using the techniques of flow cytometry, immunocytochemistry, cytogenetics, and electron microscopy. Immunophenotypic analysis revealed the presence of MSCs with high expression of the CD90 marker, lower expression of the CD44 marker, and absent expression of the CD34 marker. In assays of differentiation, the positive response to osteogenic (OST), chondrogenic (CDG), and adipogenic (ADP) differentiation signals was observed and characterized by deposition of calcium‐rich extracellular matrix (OST), proteoglycans and collagen II (CDG) and intracellular deposition of fat drops (ADP). In immunocytochemical characterization, MSCs were immunopositive for CD44, vimentin, and PCNA, and they were negative for CD13. In the ultrastructural analysis of MSCs, the most outstanding characteristic was the presence of rough endoplasmic reticulum with very dilated cisterns filled with a low electrodensity material. Additionally, MSCs had normal karyotypes (2n = 64) as evidenced by cytogenetic analysis, and aneuploidy in metaphase was not observed. The protocols for isolating, culturing, and characterizing equine MSCs used in this study were shown to be appropriate for the production of a cell population with a good potential for differentiation and without aneuploidy that can be used to study future cellular therapies. Microsc. Res. Tech. 76:618–624, 2013. © 2013 Wiley Periodicals, Inc.     

Analytical Solution for Evaluation of Voltage Surge Distribution along Transformer Windings through the Method of Residues

Computer programs have definitely become indispensable for designing power transformer. Among several applications, computer programs are mostly used for electric field calculation and thus electrical insulation concerns. In consequence, studies based on analytical approach to basic studies of correlated problems have become even more important because they form the very basis of knowledge that is necessary to every transformer designer in view of taking all the advantages of computational analyses. On the other hand, one of the most important basic studies consists in the evaluation of voltage surge distribution along transformer windings for which the method of separation of variables has been extensively used thanks to some simplifying assumptions. With this aim, authors have developed and previously published works that show the applicability of an alternative and useful analytical method that is the method of the residues, which requires no simplification to be assumed. In this work, another important step is taken towards proofing the total applicability of this promising method that is through a practical problem. A comparison to the numerical method TLM （transmission line method） is also performed and concordance with TLM and experimental data confirms the proposal of the method of residues can be also applicable to several others problems of electromagnetism.     

Antioxidant effects of Satureja montana L. essential oil on TBARS and color of mortadella-type sausages formulated with different levels of sodium nitrite

This study aimed to evaluate the effect of adding winter savory (Satureja montana L.) essential oil (EO) at concentrations of 7.80, 15.60 and 31.25 μl/g on color and lipid oxidation (TBARS) in mortadella-type sausages formulated with different sodium nitrite (NaNO₂) levels (0, 100 and 200 mg/kg) and stored at 25 °C for 30 days. The EO was extracted by hydrodistillation and analyzed by gas chromatography–mass spectrometry (GC–MS). Twenty-six chemical compounds were identified; the most prominent of which were thymol (28.99 g/100 g), p-cymene (12.00 g/100 g), linalool (11.00 g/100 g) and carvacrol (10.71 g/100 g). Among the nitrite levels tested, a concentration of 100 mg/kg of sodium nitrite appeared to be sufficient for the formation of the characteristic red color. The use of EO at concentrations exceeding 15.60 μl/g adversely affected the color of the product by reducing redness (a¹) (p ≤ 0.05) and increasing yellowness (b¹ h¹). The EO antioxidant activity was confirmed by β-carotene bleaching method and DPPH assay. Reduced values of thiobarbituric acid reactive substances (TBARS) (p ≤ 0.05) were observed in mortadellas formulated with the lowest concentrations of EO without added nitrite. This significant effect on lipid oxidation was also observed in samples containing EO and reduced amounts of sodium nitrite. The results suggest possible benefits from the combined use of EOs and minimal amounts of sodium nitrite in cured meat products.     

Systematic Modification and Evaluation of Enzyme-Loaded Chitosan Nanoparticles

Polymeric-based nano drug delivery systems have been widely exploited to overcome protein instability during formulation. Presently, a diverse range of polymeric agents can be used, among which polysaccharides, such as chitosan (CS), hyaluronic acid (HA) and cyclodextrins (CDs), are included. Due to its unique biological and physicochemical properties, CS is one of the most used polysaccharides for development of protein delivery systems. However, CS has been described as potentially immunogenic. By envisaging a biosafe cytocompatible and haemocompatible profile, this paper reports the systematic development of a delivery system based on CS and derived with HA and CDs to nanoencapsulate the model human phenylalanine hydroxylase (hPAH) through ionotropic gelation with tripolyphosphate (TPP), while maintaining protein stability and enzyme activity. By merging the combined set of biopolymers, we were able to effectively entrap hPAH within CS nanoparticles with improvements in hPAH stability and the maintenance of functional activity, while simultaneously achieving strict control of the formulation process. Detailed characterization of the developed nanoparticulate systems showed that the lead formulations were internalized by hepatocytes (HepG2 cell line), did not reveal cell toxicity and presented a safe haemocompatible profile.     

Medium carbon steel deep drawing: A study on the evolution of mechanical properties,texture and simulations,from cold rolling to the end product

Medium carbon steels are mostly used for simple applications; nevertheless new applications have been developed for which good sheet formability is required. This class of steels has an inherent low formability. A medium carbon hot rolled SAE 1050 steel has been selected for this study. It has been cold rolled with reductions in the 7–80% range. Samples have been used to assess the cold work hardening curve. For samples with a 50 and 80% thickness reduction, an annealing heat treatment has been performed to obtain recrystallization. The material has been characterized in the “as received”, cold rolled and annealed conditions, using several methods: optical microscopy, X-ray diffraction (texture), Vickers hardness and tensile testing. The 50% cold rolled and recrystallized material has been further studied in terms of sheet metal formability and texture evolution during the actual stamping of a steel toecap that has been used to validate the finite element simulations.     

BEM formulation for von Kármán plates

This work deals with nonlinear geometric plates in the context of von Kármán's theory. The formulation is written such that only the boundary in-plane displacement and deflection integral equations for boundary collocations are required. At internal points, only out-of-plane rotation, curvature and in-plane internal force representations are used. Thus, only integral representations of these values are derived. The nonlinear system of equations is derived by approximating all densities in the domain integrals as single values, which therefore reduces the computational effort needed to evaluate the domain value influences. Hyper-singular equations are avoided by approximating the domain values using only internal nodes. The solution is obtained using a Newton scheme for which a consistent tangent operator was derived.