Microstructure and electrochemical corrosion behavior of a Pb-1 wt%Sn alloy for lead-acid battery components

The aim of this study was to evaluate the effect of solidification cooling rates on the as-cast microstructural morphologies of a Pb-1 wt%Sn alloy, and to correlate the resulting microstructure with the corresponding electrochemical corrosion resistance in a 0.5 M H₂SO₄ solution at 25 °C. Cylindrical low-carbon steel and insulating molds were employed permitting the two extremes of a significant range of solidification cooling rates to be experimentally examined. Electrochemical impedance spectroscopy (EIS) diagrams, potentiodynamic polarization curves and an equivalent circuit analysis were used to evaluate the electrochemical corrosion response of Pb-1 wt%Sn alloy samples. It was found that lower cooling rates are associated with coarse cellular arrays which result in better corrosion resistance than fine cells which are related to high cooling rates. The experimental results have shown that that the pre-programming of microstructure cell size of Pb-Sn alloys can be used as an alternative way to produce as-cast components of lead-acid batteries with higher corrosion resistance.     

A Weibull model to describe antimicrobial kinetics of oregano and lemongrass essential oils against Salmonella Enteritidis in ground beef during refrigerated storage

The antimicrobial effect of oregano (Origanum vulgare L.) and lemongrass (Cymbopogon citratus (DC.) Stapf.) essential oils (EOs) against Salmonella enterica serotype Enteritidis in in vitro experiments, and inoculated in ground bovine meat during refrigerated storage (4 ± 2 °C) for 6 days was evaluated. The Weibull model was tested to fit survival/inactivation bacterial curves (estimating of p and δ parameters). The minimum inhibitory concentration (MIC) value for both EOs on S. Enteritidis was 3.90 μl/ml. The EO concentrations applied in the ground beef were 3.90, 7.80 and 15.60 μl/g, based on MIC levels and possible activity reduction by food constituents. Both evaluated EOs in all tested levels, showed antimicrobial effects, with microbial populations reducing (p ≤ 0.05) along time storage. Evaluating fit-quality parameters (RSS and RSE) Weibull models are able to describe the inactivation curves of EOs against S. Enteritidis. The application of EOs in processed meats can be used to control pathogens during refrigerated shelf-life.     

BEM formulation for reinforced plates

This article presents a BEM formulation developed to analyse reinforced plate bending. The reinforcements are formulated using a simplified scheme based on applying an initial moment field adopted to locally correct the stiffness of the reinforcement regions. The domain integrals due to the presence of the reinforcements are then transformed to the reinforcement/plate interface. The increase in system stiffness due to the reinforcements can be taken into account independently for each coefficient. Thus, one can conveniently reduce the number of degrees of freedom required in considering the reinforcement. Only one degree-of-freedom is required at each internal node when taking into account only the flexural stiffness of beams. Examples are presented to confirm the accuracy of the formulation.     

Anticoagulant, Antioxidant and Antitumor Activities of Heterofucans from the Seaweed Dictyopteris delicatula

In the present study, six families of sulfated polysaccharides were obtained from seaweed Dictyopteris delicatula by proteolytic digestion, followed by acetone fractionation and molecular sieving on Sephadex G-100. Chemical analyses demonstrated that all polysaccharides contain heterofucans composed mainly of fucose, xylose, glucose, galactose, uronic acid, and sulfate. The fucans F0.5v and F0.7v at 1.0 mg/mL showed high ferric chelating activity (～45%), whereas fucans F1.3v (0.5 mg/mL) showed considerable reducing power, about 53.2% of the activity of vitamin C. The fucan F1.5v presented the most prominent anticoagulant activity. The best antiproliferative activity was found with fucans F1.3v and F0.7v. However, F1.3v activity was much higher than F0.7v inhibiting almost 100% of HeLa cell proliferation. These fucans have been selected for further studies on structural characterization as well as in vivo experiments, which are already in progress.     

Hydrogen production from methane steam reforming: parametric and gradient based optimization of a Pd-based membrane reactor

In this work three mathematical models for methane steam reforming in membrane reactors were developed. The first one is a steady state, non isothermal, non isobaric and one dimensional model derived from material and energy balances and validated using experimental data from the literature. It is referred as full model. The influence of two different intrinsic kinetics available, as well as, the influence of five important parameters on methane conversion (X_CH4_{\mathrm{CH}_{4}}) and hydrogen recovery (Y_H2_{\mathrm{H}_{2}}) were parametrically evaluated through simulations. The second model, referred as meta-model, was obtained though the response surface technique. This meta-model was included into a constrained optimization problem solved using NPSOL. The third model, referred as a simplified model, takes into account only mass balances from the full model. Using this model, a gradient based method (DIRCOL) was used to perform the optimization of the sum of methane conversion and hydrogen recovery. High methane conversions and hydrogen recoveries were reached through these methodologies.     

Microstructure features affecting mechanical properties and corrosion behavior of a hypoeutectic Al–Ni alloy

The aim of this article is to analyze the influence of microstructural parameters on the mechanical properties and corrosion behavior of a hypoeutectic Al–Ni alloy. Experimental results include secondary dendrite arm spacing, corrosion potential, current density, pitting potential, ultimate tensile strength and yield strength. It was found that cooling rates during solidification of about 0.6 °C/s and 8 °C/s can provide secondary dendritic spacings of 7 μm and 16 μm, respectively. Although the microstructure having their phases finely and homogeneously distributed was shown to induce better mechanical properties and higher pitting potential, its general corrosion resistance decreased when compared with the corresponding results of the coarser microstructure.     

W-CDMA Uplink Capacity and Interference Statistics of a Long Tunnel Cigar-shaped Microcells Using the Hybrid Model of Propagation with Imperfect Power Control

The uplink capacity and the interference statistics (mean and variance) of the sectors of the cigar-shaped W-CDMA microcell are studied. A model with eighteen sectors is used to analyze the uplink. The microcells are assumed to exist in a long tunnel with at least nine base stations. The hybrid model of propagation is used in the calculations. The capacity and the interference statistics of the sectors are studied in terms of the most important parameters: sector radius, specific attenuation factor, antenna sidelobe levels, bend losses and the power control standard deviation error.     

On the Impact of Ultra Wide Band (UWB) on Macrocell Downlink of CDMA-PCS System

In this paper, we present an analytical model to quantify the effect of the Ultra-Wide Band (UWB) transmitters on the CDMA-PCS downlink range and normalized capacity. The effect is given for different configuration and environments. Our analysis shows that, for a single UWB transmitter, an UWB power density of −78dBm/MHz is the maximum permitted power density to have only PCS macrocell capacity reduction of 1% when the distance between the PCS mobile and the UWB transmitter is 1 m. For the multiple UWB transmitters case, a power density of −80dBm/MHz, is the maximum permitted power density to have only PCS macrocell capacity reduction of 1% when the distance between the PCS mobile and the UWB transmitter is 1 m.     

A framework for network quality monitoring in the VoIP environment

Monitoring speech quality in Voice over IP (VoIP) networks is important to ensure a minimal acceptable level of speech quality for IP calls running through a managed network. Information such as packet loss, codec type, jitter, end‐to‐end delay and overall speech quality enables the network manager to verify and accurately tune parameters in order to adjust network problems. The present article proposes the deployment of a monitoring architecture that collects, stores and displays speech quality information about concluded voice calls. This architecture is based on our proposed MIB (Management Information Base) VOIPQOS, deployed for speech quality monitoring purposes. Currently, the architecture is totally implemented, but under adjustment and validation tests. In the future, the VOIPQOS MIB can be expanded to automatically analyze collected data and control VoIP clients and network parameters for tuning the overall speech quality of ongoing calls. Copyright © 2006 John Wiley & Sons, Ltd.     

Modified imperialist competitive algorithm based on attraction and repulsion concepts for reliability-redundancy optimization

System reliability analysis and optimization are important to efficiently utilize available resources and to develop an optimal system design architecture. System reliability optimization has been solved by using optimization techniques including meta-heuristics. Meanwhile, the development of meta-heuristics has been an active research field of the reliability optimization wherein the redundancy, the component reliability, or both are to be determined. In recent years, a broad class of stochastic meta-heuristics, such as simulated annealing, genetic algorithm, tabu search, ant colony, and particle swarm optimization paradigms, has been developed for reliability-redundancy optimization of systems. Recently, a new kind of evolutionary algorithm called Imperialist Competitive Algorithm (ICA) was proposed. The ICA is based on imperialistic competition where the populations are represented by countries, which are classified as imperialists or colonies. However, the trade-off between the exploration (i.e. the global search) and the exploitation (i.e. the local search) of the search space is critical to the success of the classical ICA approach. An improvement in the ICA by implementing an attraction and repulsion concept during the search for better solutions, the AR-ICA approach, is proposed in this paper. Simulations results demonstrates the AR-ICA is an efficient optimization technique, since it obtained promising solutions for the reliability redundancy allocation problem when compared with the previously best-known results of four different benchmarks for the reliability-redundancy allocation problem presented in the literature.