Evaluation of prestress losses in prestressed concrete specimens subjected to freeze–thaw cycles

Prestressed concrete structures are considered to be reliable and durable. However, their long-term performance when subjected to frost attack is still unclear. In this work, experiments were carried out to evaluate the prestress losses in post-tensioned prestressed concrete specimens subjected to freeze–thaw cycles (FTCs). Two cases were considered: in one case, a series of specimens were prepared and tested in a freeze–thaw chamber; in the second case, the same series of specimens were tested in an indoor environment (outside the chamber). The difference between the prestress losses of the specimens inside the freeze–thaw chamber and those outside the chamber equalled the prestress losses due to FTCs. When using mathematical models to predict the prestress losses due to the FTCs, it was found that they were relatively small when the concrete was slightly damaged. However, they increased rapidly when the FTCs were repeated. The eccentricity of the prestress wires led to larger prestress losses when subjected to FTCs. Moreover, the same cross section and eccentricity resulted in similar prestress losses due to the FTCs, and the relatively high-strength concrete could withstand more FTCs.     

Mobilisation of heavy metals by deicing salts in a roadside environment

The seasonal variations of some selected heavy metals (Cd, Cu, Pb and Zn) and principal anions in soil solutions were monitored as a function of distance from the road at two field sites in Sweden. During the winter, the conductivity, concentrations of dissolved sodium and chloride increased dramatically due to the application of deicing agents (i.e. NaCl). Due to ion exchange, the pH decreased one unit in the soil solutions, whereas the concentrations of total organic carbon decreased due to coagulation and/or sorption to stationary solids. The heavy metal concentrations increased during the winter, but through different mechanisms. Cadmium concentrations in the aqueous phase increased as a response to ion exchange, possibly also enhanced by the formation of chloride complexes. Similarly, the concentrations of zinc increased, due to ion exchange, with calcium and protons. The mechanisms of mobilisation for copper and lead were not that clear probably due to association with coagulated or sorbed organic matter in combination with colloid dispersion.     

Structural classification of Quillaja saponins by electrospray ionization ion trap multiple-stage mass spectrometry in combination with multivariate analysis, proof of concept

MS² and MS³ spectra of thirteen previously identified saponin structures from Quillaja saponaria Molina were obtained by electrospray ionization ion trap multiple-stage mass spectrometry (ESI-ITMSⁿ) in positive ion mode. The spectra were analysed by partial least squares regression-discriminant analysis (PLS-DA) yielding a method that can classify the spectra according to saponin structure. For this method a referencing of the m/z axis was essential to obtain a correlation between peaks in the spectra and common structural elements. The MS² and MS³ spectra could be classified according to the structures of the oligosaccharides at C-3 and C-28 of the corresponding saponins. Terminal residues with the same mass, such as β-d-Apif and β-d-Xylp, could also be distinguished. The PLS-DA method was applied on Quillaja saponins separated from a commercial bark extract by reversed-phase chromatography.The method outlined here is applied on a specific group of Quillaja saponins, but can be used on other types of glycoconjugates. Combination of this technique with chromatography would give a very powerful tool for rapid identification of components in complex mixtures.     

Forces Measured between Zirconia Surfaces in Poly(acrylic acid) Solutions

We have studied the forces between a sphere and a plane surface of yttria-partially-stabilized tetragonal-zirconia immersed in aqueous solutions of low-molecular-weight ( M _w= 10 000) poly(acrylic acid) (PAA) using atomic force microscopy. The measurements are performed at high pH where the adsorbed, highly charged anionic polyelectrolyte extends far into the solution, resulting in a combination of polymeric (steric) and electrostatic interactions. Analysis of the experimental data using scaling theory shows that the polymeric contribution dominates and that the electrostatic contribution is small at relatively high ionic strength (0.01 M NaCl). We find that the measured forces are highly dependent on time and interaction history of the absorbed PAA layer; consecutive compression-decompression cycles result in an increase of the surface coverage and the range of the repulsive polymeric interaction. This buildup of PAA at the interface is strongly related to attractive bridging interactions manifested as strong adhesion during decompression at less than full surface coverage. The force results are compared to rheological observations of zirconia suspensions stabilized by the same dispersant; the poor colloidal stability and high viscosity at low surface coverage of PAA are related to the attractive bridging interactions.     

Molecular mechanisms involved in creep phenomena of paper

The phenomenon of mechanosorptive creep (i.e., the increasing creep occurring in some hygroscopic materials subjected to moisture cycling) was studied for paper from a molecular point of view. Paper was tested in creep at different loading levels in a constant high humidity of 90% relative humidity (RH) and in a cyclic climate between 30 and 90% RH. Throughout the creep tests, spectra from the mid‐ and near‐IR, as well as dynamic mechanical data, were recorded to determine molecular changes occurring with time. In tensile stress scans the instantaneous, dynamic elastic modulus was found to increase. It is suggested that this increase was due to orientation of the cellulose molecules, which was detected as changes in the mid‐IR spectra at 1160 cm⁻¹ assigned to the C₁ O C₄ stretching. During creep in constant and cyclic humidity, the modulus was found to increase with time, more so for the cyclic humidity. Changes in the mid‐IR spectra at 1184 and 1030 cm⁻¹, which is assigned to CH₂, CH, and C O, may indicate sliding between the cellulose chains. The near‐IR measurements mainly showed differences in the moisture content. In stress scans the moisture content increased with increasing tensile load. In creep at constant 90% RH, the moisture content was also found to increase in a manner similar to the stress scan. In the cyclic humidity with a conditioning time of 70 min at 90% RH the moisture content decreased successively with increasing numbers of cycles. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1590–1595, 2001     

Corrosion of HR3C heat exchanger alloy in a biomass fired PF utility boiler

Detailed microscopic examinations have been conducted on two, temperature‐regulated probes (commercial HR3C heat exchanger alloy) after being exposed to biomass flue gas inside a PF boiler for 3770 h at 600°C and 650°C respectively. Corrosion of the tube proceeds via scale formation and internal element depletion. Three characteristic types of internal corrosion have been identified depending on their position relative to the flue gas passage and deposit/flue gas chemistry. Severe, mainly internal corrosion occurs at down‐stream locations where higher potassium chloride content exists within the deposit. Corrosion mechanisms corresponding to each type of internal corrosion have been proposed based on further laboratory tests and thermodynamic analysis. The increased temperature (650°C) causes slightly higher material wastage for the alloy.     

Biosensor assay for determination of haptoglobin in bovine milk

Despite more than 30 years of research into mastitis diagnostics, there are few alternatives to the somatic cell count (SCC) in practical use for identification of cows with subclinical mastitis. Mastitis is not only an animal welfare problem, but also affects the yield, composition and technological properties of milk. Hence, dairy cooperatives give farmers a premium quality payment to encourage low SCC although there is no clear scientific data defining the level of SCC in bulk tank milk that is associated with additional benefits in terms of milk quality. Recent research on alternative markers for inflammatory reactions in the lactating cow, e.g. in mastitis, includes investigations of the acute phase protein, haptoglobin (Hp). So far, the content of Hp in milk has mainly been studied in relation to mastitis diagnostics, with little attention given to its importance for milk composition and technological properties. At present, Hp in milk is measured using ELISA, but this technique is not suitable for routine large-scale analysis. In recent years, optical biosensor technology has been used for automated and rapid quantitative analysis of different components in milk, but so far not for analysis of acute phase proteins. The aim of the present study was to develop a rapid and sensitive biosensor method to determine Hp in milk. An affinity sensor assay based on the interaction between Hp and haemoglobin was developed using surface plasmon resonance (SPR) biosensor technology. The assay was used to analyse Hp in composite milk samples from cows without any clinical signs of mastitis and quarter milk samples with a weak to strong reaction in the California Mastitis Test (CMT). A commercial ELISA for determination of Hp in milk was used for comparison. The limit of detection (LOD) of the biosensor assay was determined as 1.1 mg/l. Within-assay and between-day variations were determined both with bulk tank milk spiked with human Hp and with composite milk samples containing bovine Hp. Coefficients of variation varied between 3.6 and 8.6% at concentrations between 4.0 and 12 mg/l, respectively. Agreement between the results obtained by the biosensor assay and the ELISA was satisfactory; however, the results obtained by the biosensor were generally lower than the results obtained by the ELISA. Possible explanations for this observation are discussed.     

Modeling real-time balancing power demands in wind power systems using stochastic differential equations

The inclusion of wind power into power systems has a significant impact on the demand for real-time balancing power due to the stochastic nature of wind power production. The overall aim of this paper is to present probabilistic models of the impact of large-scale integration of wind power on the continuous demand in MW for real-time balancing power. This is important not only for system operators, but also for producers and consumers since they in most systems through various market solutions provide balancing power.     

Coordinated control of multiple HVDC links using input–output exact linearization

This paper is concerned with the investigation of a new control technique for the conventional High Voltage Direct Current (HVDC) link. The proposed technique relies upon nonlinear state feedback linearization of the AC/DC power system.     

Impacts of large amounts of wind power on design and operation of power systems,results of IEA collaboration

There are dozens of studies made and ongoing related to wind integration. However, the results are not easy to compare. IEA WIND R&D Task 25 on ‘Design and Operation of Power Systems with Large Amounts of Wind Power’ collects and shares information on wind generation impacts on power systems, with analyses and guidelines on methodologies. In the state‐of‐the‐art report (October, 2007), and the final report of the 3 years period (July, 2009) the most relevant wind power grid integration studies have been analysed especially regarding methodologies and input data. Several issues that impact on the amount of wind power that can be integrated have been identified. Large balancing areas and aggregation benefits of wide areas help in reducing the variability and forecast errors of wind power as well as help in pooling more cost effective balancing resources. System operation and functioning electricity markets at less than day‐ahead time scales help reduce forecast errors of wind power. Transmission is the key to aggregation benefits, electricity markets and larger balancing areas. Best practices in wind integration studies are described. There is also benefit when adding wind power to power systems: it reduces the total operating costs and emissions as wind replaces fossil fuels and this should be highlighted more in future studies. Copyright © 2010 John Wiley & Sons, Ltd.