Healing DNA Self-Assemblies Using Punctures

In self-assembly, individual components (commonly referred to as tiles) have sufficient infor mation to build templates for structures such as lat tices for two-dimensional scaffolds. Tile sets that can heal (fully or partially) an erroneous DNA assembly have been proposed. Healing requires growth to be restarted such that erroneous tiles can be removed and the correct tiles can bind to the aggregate. Punctures have been proposed for this purpose; in this paper, a puncture is intentionally induced in the self-assembly to restart the growth process. The goal of this paper is to characterize an intentionally induced puncture (and its relevant properties) on an erroneous tile site in the grown crystal as part of a healing process. This allows to propagate any newly generated error away from the source of growth (i.e. the seed tile), such that self-assembly can continue along specific directions. Different types of puncture are considered with respect to healing and related features, such as growth direction, error and aggregate types. Punctures are analyzed using a new characterization and metric; different tile sets are investigated in detail for healing of a DNA self-assembly.

Availability modelling of ring microcomputer systems

A model for the availability of ring systems has been derived using the frequency balancing approach.A computer program has been written to evaluate different microcomputer based architectures by taking into consideration various features such as bus interfaces, number of modules, repair, hardware and software failure interaction, recovery procedure.Isolation and self purging of faulty modules have been proved to be significant factors in the calculation.     

Availability analysis of a N modules parallel system with common memory,central controller and distributed software

Parallel systems with processing distributed in the various modules are very interesting examples of hardware/software tradeoffs within a complex structure. An example of such a system mode of N modules, has been considered. The implications of a common memory and a central controller are analysed and an availability model is derived.The division of the software task into subtasks is viewed as a source of possible deadlock of the structure. Series catastrophic states due to hard core units and software coupling are included in the availability analysis.     

The Expression of Active CD11b Monocytes in Blood and Disease Progression in Amyotrophic Lateral Sclerosis

Monocytes expressing the inflammation suppressing active CD11b, a beta2 integrin, may regulate neuroinflammation and modify clinical outcomes in amyotrophic lateral sclerosis (ALS). In this single site, retrospective study, peripheral blood mononuclear cells from 38 individuals living with ALS and 20 non-neurological controls (NNC) were investigated using flow cytometry to study active CD11b integrin classical (CM), intermediate (IM) and non-classical (NCM) monocytes during ALS progression. Seventeen ALS participants were sampled at the baseline (V1) and at two additional time points (V2 and V3) for longitudinal analysis. Active CD11b+ CM frequencies increased steeply between the baseline and V3 (ANOVA repeated measurement, p < 0.001), and the V2/V1 ratio negatively correlated with the disease progression rate, similar to higher frequencies of active CD11b+ NCM at the baseline (R = −0.6567; p = 0.0031 and R = 0.3862; p = 0.0168, respectively). CD11b NCM, clinical covariates and neurofilament light-chain plasma concentration at the baseline predicted shorter survival in a multivariable and univariate analysis (CD11b NCM—HR: 1.05, CI: 1.01–1.11, p = 0.013. Log rank: above median: 43 months and below median: 21.22 months; p = 0.0022). Blood samples with the highest frequencies of active CD11b+ IM and NCM contained the lowest concentrations of soluble CD11b. Our preliminary data suggest that the levels of active CD11b+ monocytes and NCM in the blood predict different clinical outcomes in ALS.     

Processing of a natural hydroxyapatite powder: From powder optimization to porous bodies development

This paper deals with the development of macro-porous components made of a carbonated hydroxyapatite (HAp) nanopowder which was extracted from pig bones. Prior to sintering, the powder was treated at 700 °C for 1 h. During calcination, a partial carbonate decomposition occurred yielding CaO. In order to eliminate this by-product, the calcined HAp was washed in distilled water several times, checking the effect of washings by FT-IR spectroscopy. Then, the thermal stability of the as-calcined and washed powders treated in the range 800-1400 °C was investigated by XRD.After that, macro-porous materials made of washed HAp powder were prepared through a modified gelcasting process, using agar as a natural gelling agent and polyethylene spheres as the pore formers.     

Analysis of CLA Isomer Distribution in Nutritional Supplements by Single Column Silver-Ion HPLC

Nutritional supplements containing conjugated linoleic acid (CLA) isomers, widely used to improve body composition and inhibit fat storage, should be thoroughly analyzed, as CLA effects are isomer specific. In this research, an improvement of silver-ion high performance liquid chromatography (Ag⁺-HPLC) was obtained by using a single-column instead of the most commonly used multi-columns. To develop the procedure, a standard CLA mixture has been derivatized with different chain length alcohols (from methanol to hexanol). Hexyl CLA showed better separation between CLA isomer pairs, in particular the resolution of the t10,c12: c9,t11 pair increased from 0.3 (methyl esters) to 0.8 (hexyl esters). Therefore, the CLA isomer composition of some commercial CLA products was determined by Ag⁺-HPLC analysis of hexyl esters. The main isomers in all supplements turned out to be c9,t11-CLA and t10,c12-CLA, the most anti-adipogenic isomer. t8,c10- and c11,t13-CLA were not detected. The nutritional supplements were also analyzed by high resolution gas chromatography of methyl esters to evaluate the fatty acid % composition and total CLA % content. The total CLA ranged from 79.4 to 94.4 %, and the t,t isomer from 1.4 to 7.3 %.     

Optimization of properties in a rubber compound containing a ternary polymer blend using response surface methodology

In order to find the best combination of three synthetic rubbers, that is, styrene‐butadiene rubber (SBR) grade 1712, SBR grade 1721 and high‐1,4‐cis polybutadiene, that produce a compound with specific end‐use properties, a statistical experimental design is proposed in this work. The design consists of ten mixtures containing specific amounts of total styrene and BR content. A number of properties are tested in each mixture, selecting those related to requirements for the tread of a high performance tire: glass transition temperature (T_g), the ratio between the viscous modulus and the elastic modulus (tanδ@60 °C), Mooney viscosity, and the tensile properties. The values obtained for each property are fit to statistically significant models, obtaining the respective response surfaces. These are next used to define a desirable formulation with the optimal ratio of each rubber, and finally the optimized formulation is validated by comparing the experimental and predicted values for each modeled property. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46548.     

Gelcasting of dense and porous ceramics by using a natural gelatine

An improved gel-casting procedure was successfully exploited to produce porous ceramic bodies having controlled porosity features in terms of mean pore size, total pore volume as well as pore geometry. The gel-casting process in which a natural gelatine for food industry is used as gelling agent was firstly set-up to prepare dense alumina and zirconia components. Then, commercial PE spheres, sieved to select proper dimensional ranges, were added to the starting slurries as pore-forming agent. Both alumina and zirconia porous bodies were then produced, having a porosity ranging between 40 and 50 vol%. The fired components were characterised by spherical pores surrounded by highly dense ceramic walls and struts, having a homogeneous and fine microstructure. Their mean pore size was directly dependent on the sieved fraction of the starting PE spheres selected as pore-forming phase.     

Improvements in Mechanical Properties of 319 Al Alloy Engine Blocks Through Cost-Effective Solution Heat Treatment

The use of Al engine blocks has increased significantly to improve vehicle fuel efficiency. However, the gray cast iron cylinder liners cause the development of large tensile residual stress along the cylinder bores which necessitates the optimization of mechanical properties in this region to prevent premature engine failure. This study compared the microstructure of T4-treated Al billet castings of varying cooling rate to that of the cylinder region of T4-treated (current production schedule) Al engine blocks. The aim of this study was to develop a cost-effective small scale heat treatment optimization method for engine block production. Comparisons in microstructure between the engine block and the billet castings were carried out using optical and scanning electron microscopy. The results suggest that the microstructure and hardness at the top, middle, and bottom of the cylinder were similar to those of each representative billet casting, indicating that heat treatment resulted in successful replication of the engine block locations. In addition, tensile testing revealed that the YS and UTS increased slightly following T4 treatment for all billet castings, which was also observed at the middle of the engine block cylinder bridge. As such, this method can be an effective forerunner for future heat treatment optimization in Al engine block production.     

F-substituted hydroxyapatite nanopowders: Thermal stability,sintering behaviour and mechanical properties

Fluorine-substituted hydroxyapatites are considered promising materials for bone scaffolding. In this study a systematic investigation on F-half substituted hydroxyapatite (F-HAp, Ca₁₀(PO₄)₆OHF) obtained by precipitation is reported. Results on composition analysis, thermal behaviour, and sinterability are presented for a comparison with the respective pure hydroxyapatite. Samples were characterised by electron microscopy, induced coupled plasma-atomic emission spectroscopy, thermal analysis, infrared spectroscopy, N₂ adsorption measurements, X-ray diffraction and dilatometry. A semicrystalline F-substituted hydroxyapatite powder made up of needle-like nanoparticles was obtained. Notwithstanding that it was thermally stable up to 1300 °C, it was sintered at relatively low temperatures obtaining a very fine microstructure with a relevant nano-porosity, beneficial in view of cell adhesion and in-growth.Hardness, elastic modulus and toughness of produced samples were investigated by Vickers–Knoop microhardness testing. Significant improvements of the mechanical properties were observed for the F-substituted hydroxyapatite, in comparison with pure hydroxyapatite.