基于强跟踪滤波器训练的前向神经网络及其在系统辨识中的应用研究*

给出基于强跟踪滤波器训练前向神经网络的新方法。由于强制残差序列保持相互正交,强跟踪滤波器相对扩展Kalman滤波的收敛速度更快,同时精度更高。最后通过系统辨识仿真实例验证该方法的有效性。     

电泳沉积制备TiO2纳米片作为钙钛矿太阳电池缓冲层

有机-无机杂化钙钛矿太阳电池自诞生以来,经过十几年的探索与发展,其认证效率由最初的3.8％发展为25.2％.界面问题一直是提升器件光电转换效率的关键.利用电泳沉积法制备TiO2薄膜,以TiO2纳米片为缓冲层制备钙钛矿太阳电池,研究TiO2缓冲层对钙钛矿太阳电池(PSCs)的光电转换效率及载流子运输的影响.结果表明,相对于未加入缓冲层的PSCs,电池的光电转换效率由10.78％提升至12.71％.TiO2缓冲层的加入有效地改善了界面接触问题,降低了电荷转移时的电阻,促进了载流子的运输,明显提高了钙钛矿太阳电池的光伏性能.     

二氧化硅包覆CsPbI3纳米晶薄膜的制备

卤化钙钛矿型(ABX3)纳米材料是近几年兴起的光电新材料,由于全无机钙钛矿CsPbX3(X=Cl,Br,I)纳米晶体的稳定性差,严重阻碍了实际应用,但因其具有窄带隙,在太阳能电池领域有着重要的应用前景.本研究在CsPbI3纳米晶周围使硅酸四甲酯(TMOS)发生水解反应,形成CsPbI3@SiO2纳米晶体复合材料,促使甲苯悬浮液的稳定性显著提高,发光稳定性可增加到29 d.通过进一步以聚(苯乙烯-乙烯-丁二烯-苯乙烯)三嵌共聚物(SEBS)对复合材料进行包裹,得到具有良好透明性和可拉伸性的SEBS/CsPbI3@SiO2薄膜,在水中有保持24 h稳定荧光现象,在水中12 h能保持原有发光强度的53％,而未经二氧化硅包裹的SEBS/CsPbI3纳米晶薄膜在水中仅8 h就失去荧光.本研究不仅为CsPbX3的表面改性提供了一种新方法,有助于解决稳定性问题,而且以聚合物复合的薄膜具有可拉伸性,也可应用在柔性器件中,具有重要的应用价值.     

风轮模拟试验平台的仿真与研究

分析风力机的特性,在上位机上搭建风力机的模型,通过上位机对变频器输入指令以实现对异步电机的控制,通过光电编码器和USB数据采集卡实现转速采集.设计一套基于LabVIEW的风轮模拟试验平台,为试验室的无风环境提供可控风速.提出一种转速控制方案并实现仿真,便于进行风力发电技术的研究.     

WiNoC中基于Edge first算法的流量平衡设计

在无线片上网络中,无线节点拥塞以及不同子网和全局网络内的流量平衡情况对整个片上网络的通信效率有着重要的影响,为此提出了基于Edge first算法的全局流量平衡机制（GTB）。首先优化了划分有线无线数据包的机制,减少了无线节点处的拥塞;其次根据无线路由器（WR）的拥塞情况,提出Edge first路由算法平衡子网内的流量;最后在全局网络中提出了全局子网拥塞感知（GSCA）判断机制,使得长距离数据包优先从低拥塞子网通过,平衡了全局网络的流量。实验表明,该方案在可接受的硬件开销、功耗开销下,保证较低的网络延迟和较高的网络吞吐率,并且大幅的提升了网络的流量平衡性能。     

Room-Temperature Solid-State Lithium Metal Batteries Using Metal Organic Framework Composited Comb-Like Methoxy Poly(ethylene glycol) Acrylate Solid Polymer Electrolytes

Solid polymer electrolyte with good thermal stability and flexibility is an excellent candidate for solid-state lithium metal batteries, while its low ionic conductivity caused by high crystallinity limits its application at ambient temperature. Here a metal organic framework (zeolitic imidazolate framework-8, ZIF-8) composited comb-like methoxy poly(ethylene glycol) acrylate polymer electrolyte (MCPE) with high ionic conductivity (9.96 × 10⁻⁵ S cm⁻¹ at 30 °C) is prepared by an in situ UV polymerization method. The as-prepared MCPE exhibits improved mechanical property due to the introduction of porous ZIF-8 nanofillers, which is beneficial to suppress the growth of lithium dendrites. Consequently, the LiFePO₄||MCPE||Li cells show a high capacity of 116 mAh g⁻¹ at 30 °C and 0.5 C, and maintain 89.4% of initial capacity after 150 cycles with the average Coulombic efficiency of 99.9%. These results demonstrate that the MCPE shows great potential in solid-state lithium metal batteries near room temperature.     

Crude Wax Extracted from Rice Bran Oil Improves Oleogel Properties and Oxidative Stability

Crude wax extracted from rice bran oil (RBO) is used to improve the oleogel properties and oxidative stability of RBO. The effect of crude rice bran wax (CrBW) on the formation characteristics and oxidative stability of oleogels is discussed. The results show that oleogels can be formed with 7.0 wt% CrBW at 20 °C. As the concentration of CrBW increases from 7.0 to 11.0 wt%, the hardness and solid fat content (SFC) of the oleogels increase significantly, and the oleogels are primarily β' crystals. Moreover, oleogel crystals formed with 5 and 7 wt% CrBW are flocculent; when the amount included is 9%, the oleogel crystals are transformed into long dendrites, and the density rises. After 90 days of storage at 20 °C, the peroxide value of oleogels formed with 9.0 wt% CrBW slowly rises from 3.21 to 6.52 mmol kg⁻¹. Practical Applications: Oleogels prepared here by CrBW and RBO are an innovative structural lipid without trans fats. Useful information on the rich fats and nutrients in CrBW is provided, which reduces the production cost and improves the industrial production capacity.     

25Cr3Mo3NiNb二次硬化钢冲击性能的研究

研究了二次硬化钢25Cr3Mo3NiNb的冲击韧度随回火温度和试验温度的变化.结果发现,试验钢在200℃回火时冲击韧度较高,300～600℃回火时冲击韧度值较低,600℃以上回火时冲击韧度值迅速升高,640℃回火时冲击韧度达到最高值55J/cm2,640℃以上回火时冲击韧度值有所降低.640℃回火后试验钢的冷脆转变温度为10℃,屈服强度为960MPa,可以满足兵器特种结构件高强度高韧性的要求.     

Co-colouration Effects in the Systems of Metal(Ⅱ)-Rare Earth(Ⅲ)-Xanthene Dye and Their Influences on Photometric Determination of Metal Ions

After comparing the influences of each rare earth(Ⅲ),11 species of metal(Ⅱ)and 8 species of acidictriphenylmethane dye on the formation of coloured coordination compound in the system of Metal(Ⅱ)-RE(Ⅲ)-Dye,it was proven that the co-colouration effect can be caused only by the xanthene dyes(XD)con-taining substituting hydroxy.group on the ortho-position of etheric oxygen group.Besides,the radius of met-al(Ⅱ)must not be smaller than a definite limit;otherwise,no co-colouration appears.Furthermore,the acid-ity of medium is another important factor to affect co-colouration,Bromopyrogallol red causesco-colouration of Pb(Ⅱ)-RE(Ⅲ)only,owing to its higher chromophoric acidity;while alizarin violet causesco-colouration of M(Ⅱ)-RE(Ⅲ)(M=Pb,Ca,Sr and Ba),due to its lower chromophoric acidity.The condi-tions causing co-colouration,the regularities of co-colouration and the influences of co-colouration inphotometric determination of metals were discussed.     

钛及钛合金电弧钎焊及接头强度

用Ti—Cu—Ni，Ti-Cr-Zr钎料在TIG电弧加热条件对TA2和Ti—6Al—4V钛合金进行钎焊。结果表明：用Ti—Cu—Ni钎料钎焊TA2和Ti—6Al—4V钛合金的搭接接头强度分别是418．3MPa和439．6MPa；用Ti—Cr—Zr钎料钎焊TA2和Ti—6Al—4V钛合金的搭接接头强度分别是575．2MPa和656．1MPa。对Ti-Cu-Ni钎料／母材界面分析认为固液异分化合物η相((Cu，Ni)Ti2)生成时呈笋状生长，嵌入钎缝对钎缝的强度提高有利。对Ti-Cr-Zr钎料／母材界面分析，认为主要是固溶体β-Ti(Cr)存在提高了钎缝强度。