Formation and Characterization of 1.5-Monolayer Self-Assembled InAs/GaAs Quantum Dots Using Postgrowth Annealing

In this paper, we report that low-density InAs/GaAs quantum dots (QDs) can be formed by postgrowth annealing the samples with 1.5-monolayer (ML) InAs coverage, which is thinner than the critical layer thickness for the Stranski-Krastanov growth. The annealing procedure was performed immediately after the deposition of the InAs layer. The effects of annealing time and annealing temperature on the dot density, dot size, and optical characteristics of the QDs were investigated. The optimum annealing conditions to obtain low-density QDs are longer than 60 s and higher than 500degC . Meanwhile, no luminescence can be observed for the wetting-layer, which may suggest that the postgrowth annealing will make the wetting layer thinner and thus reduce the effects of wetting layer on carrier relaxation and recombination. On the other hand, we observe that a decrease of the PL intensity at the annealing conditions of 60 s and 515degC , which is possibly due to the increasing surface dislocations resulted from the In adatom desorption at higher annealing temperature.     

生活中的慢性杀手--石化合成洗剂

文章回顾了石化合成洗剂的发展历史，从经历的五代产品的发展过程中可以看出它经历了一个环保到不环保再到环保的曲折过程分析了石化合成洗剂的主要成分及其清洗去污的作用原理着重指出目前使用的石化合成洗剂虽然给生活带来便利，但同时也给人体健康和生态环境都造成严重的危害；倡导使用新型环保型的第五代洗剂已成为新世纪中清洗剂发展的必然趋势。     

阻燃沥青的研究进展与建议

介绍了对沥青进行阻燃处理的必要性、沥青的阻燃机理、常用阻燃剂的特性及其作用模式;参照塑料材料阻燃性能的测试手段介绍了常用的沥青材料阻燃性能的测试方法;最后分析了我国沥青阻燃的研究现状,指出了该领域存在的主要问题,并给出了相应的建议。     

Surface-mount dual-loop antenna for 2.4/5 GHz WLAN operation

A surface-mount dual-loop antenna suitable for dual-frequency WLAN operation is presented. For achieving dual-frequency operation with a compact size, the antenna comprises two loop strips of different sizes printed on a flexible printed circuit board, which is then bent and attached onto a foam base of compact size. The antenna shows an attractive feature of high antenna gain, about 4 and 5 dBi for frequencies across the 2.4 and 5 GHz WLAN bands, respectively.     

控制CCL产量的几点分析

研究了如何在不进行设备改造的情况下,提高CCL产量的方法,指出了从四大工序入手是解决问题的关键。     

A compact LTCC branch-line coupler UsingModified-T equivalent-circuit modelfor transmission line

In this letter, a compact branch-line coupler is proposed by making good use of the three-dimensional layout capability of the low-temperature co-fired ceramic (LTCC) substrate. This branch-line coupler is accomplished by using lumped-inductors and lumped-capacitors to realize the modified-T equivalent-circuit model for the transmission line so that the circuit size may drastically be reduced. Specifically, a very compact LTCC branch-line coupler with a size of 0.079/spl lambda//spl times/0.0717/spl lambda/ is implemented and carefully examined, where /spl lambda/ is the wavelength of the multilayer structure at the operating frequency f/sub 0/.     

PBA/PMMA核壳结构乳胶粒子粒径分析

采用种子乳液聚合制备出了PBA/PMMA核壳结构乳胶粒子，研究并分析了MMA在3种不同投料方式（间歇法、半间歇法和平衡溶胀法）下粒子粒径变化情况。实验发现第二单体采用间歇法投料可获得较理想的核壳结构乳胶粒。     

SF6气体绝缘电容式电压互感器研制

本文介绍西容公司新研制的一种完全无油化的SF6气体绝缘电容式电压互感器,提出了关键技术问题解决方案和产品绝缘结构的设计思路.并介绍了研制成功的110kV和220kV系列产品的结构、技术参数、性能指标、试验考核情况和产品特点.     

A push mechanism for GPRS supporting private IP addresses

The General Packet Radio Service (GPRS) provides a packet switched data service for mobile users. However, the existing GPRS specification does not provide the push mechanism and it is difficult to support GPRS services such as call termination (incoming call) for wireless voice over IP (VoIP). Based on the short message service, this paper proposes a push mechanism for GPRS supporting private IP addresses. Our approach does not need to modify the existing GPRS structure.     

Enhancement of underfill capillary flow in flip-chip packaging by means of the inertia effect

This paper describes how the use of inertia forces induced by the rotation of a working disk may be adopted to increase the fill rate of the flip-chip packaging process and thereby reduce the process cycle time. It is shown how the driving forces resulting from the inertia effect are determined by the Weber number. The constant and varying contact angle models are compared under a specified set of process conditions. The calculated flow behavior results indicate that the relationship between the contact angle, the average fluid velocity, the liquid-air interface position, and the filling time depends upon the Weber number. The constant and varying contact angle models are utilized in the analysis of a new processing method referred to as rotation-enhanced underfill packaging (REUP). The inertia effect induced by the angular motion of the working disk is shown to enhance the flow of the underfill encapsulant and to reduce the time of the underfill process. The present results confirm that the rotation of the working disk leads to an increased underfill capillary flow rate, which is beneficial in reducing the production cycle time of the flip-chip packaging process.