Tunneling spectroscopy of palladium-barium emitters

The surface of a palladium-barium cathode was studied using scanning probe microscopy techniques. Data from the tunneling spectroscopy showed the pattern of the electron work function distribution over a microscopic region on the emitter surface. This pattern is compared to the distribution of various phases in the palladium-barium alloy employed.     

Structure and properties of porous silicon obtained by photoanodization

The results of an investigation of layers of porous silicon (PS), which was obtained by electrochemical etching of p-Si under different illumination conditions — natural light, incandescent light, and light from a mercury lamp with and without a filter — are reported. The structure of the layers was studied by double-crystal x-ray diffractometry, the composition was monitored by means of the IR absorption spectra, and the radiative properties were monitored according to the photoluminescence (PL) spectra. It was established that electrochemical etching under illumination produces PS with a higher porosity and more intense PL whose maximum is shifted into the short-wavelength region. These changes are accompanied by a large disordering of the structure and an increase in the oxygen content in the layer. It is concluded that illumination accelerates the chemical interaction of PS with the electrolyte due to oxidation. High-porosity porous silicon stored in air exhibits quenching of PL. Conversely, PL is excited in layers with a lower porosity. Aging of PS is characterized by an increase in the microdeformation of the layers, a decrease in the crystallite sizes with a partial loss of coherence between the crystallites and the substrate, and an increase in the fraction of the amorphous phase. Fiz. Tekh. Poluprovodn. 31, 1261–1268 (October 1997)     

Organizing the production of heat-insulating inserts for ingot-mold hot tops

The Zlatoust Metallurgical Plant has developed a technology that employs semi-dry pressing to make two-layer (composite) heat-insulating inserts for ingot-mold hot tops. The working layer is made of a mixture of materials based on quartz sand, while the insulating layer is based on foamed vermiculate. The binders are sodium silicate solution and commercial lignosulfonate with a density of 1.12–1.20 g/cm³.     

Optimal systems for moving-object detection and classification

Translated from Kibernetika i Sistemnyi Analiz, No. 5, pp. 137–145, September–October, 1993.     

Influence of the purity of the starting materials on the recording of dynamic holograms in Bi12TiO20 crystals

The parameters of Bi₁₂TiO₂₀ crystals grown with bismuth oxide of different degrees of purity were measured by a holographic recording technique in an external ac electric field and were compared with a crystal specially doped with chromium. Various crystal parameters such as the diffusion length of the photoexcited carriers and the Debye screening length were determined. It was found that the absorption spectrum of the material and the holographic recording efficiency were strongly influenced by light chromium doping and by insufficient purity of the starting mixture. Pis’ma Zh. Tekh. Fiz. 23, 27–32 (March 12, 1997)     

Formation of cube texture in nickel-palladium alloys for epitaxial substrates for deposition of high-temperature superconductors

The texture, structure, and magnetic and mechanical properties of thin ribbons of nickel-palladium alloys have been studied. It has been demonstrated that in Ni₉₄Pd₆ and Ni_92.5Pd₅W_2.5 alloys, a sharp cube texture can be formed that is stable up to rather high annealing temperatures. Segregation of palladium atoms to surface layers of ribbons has been found, which gives additional advantages for using these ribbons as substrates for epitaxial deposition of high-temperature superconductors.     

An Effect of Nonferromagnetic Gaps on the Magnetic Properties of Stacks of Steel Plates with Different Values of Magnetic Hardness: I. A Closed Circuit

Stacks of steel plates having different values of magnetic hardness and separated with nonferromagnetic gaps are investigated. The coercive force and the residual magnetic induction of a stack measured in a closed magnetic circuit depend on the layout of the plates in the stack and on the thickness of nonmagnetic gaps between them.__________Translated from Defektoskopiya, Vol. 41, No. 3, 2005, pp. 55–62.Original Russian Text Copyright © 2005 by Gorkunov, Mitropol’skaya, Povolotskaya.Dedicated to the Anniversary of the 100th Birthday of Corresponding Member of the Russian Academy of Sciences M. N. Mikheev     

Inspection of the Strength Characteristics and Heat-Treatment Quality of Ferromagnetic Articles Based on Parameters of the Residual-Magnetization Hysteresis Loop upon Their Local Magnetization and Magnetization Reversal in a Pulsed Magnetic Field with a Variable Amplitude: I. Parameters of the Hysteresis Loop

Results of an experimental study of the anomalous behavior of the residual-magnetization hysteresis of ferromagnetic articles that, under local magnetization and magnetization reversal in a pulsed magnetic field with a variable amplitude, were subjected to heat treatment under different conditions are reported. Parameters of the hysteresis and their dependence on the magnetization and magnetization-reversal conditions, as well as on the magnetic properties of a material, are considered.__________Translated from Defektoskopiya, Vol. 41, No. 5, 2005, pp. 3–13.Original Russian Text Copyright © 2005 by Matyuk, Mel’gui, Pinchukov, Lyubarets.All papers in this issue are devoted to the 100th anniversary of the birth of the late M.N. Mikheev, corresponding member of the Russian Academy of Sciences and one of the founders of magnetic structural analysis.