Conversion of acrylonitrile-based precursors to carbon fibres

The progress of stabilization of two compositions of acrylic fibres with various orientations has been followed by a variety of techniques. The thermooxidative treatments for stabilization have been carried out in a continuous process and also in a batch process under free shrinkage, constant length and constant tension conditions. The morphological model of acrylic fibres consists of an alternating sequence of laterally ordered and laterally disordered regions along the fibre direction. This structure is consistent with the observations based on small-angle X-ray scattering of copper- impregnated precursor fibres and thermomechanical response, thermal stress development, calorimetry, wide- and small-angle X-ray scattering and sonic modu-lus measured at different extents of stabilization. Lateral as well as orientational order in these fibres can be increased markedly through a high-temperature deformation process prior to stabilization. An increase in perfection and extent of order is observed in the early stages of stabilization. There is also a simultaneous decrease in the orientation of the disordered phase at this stage and the extent of this decrease depends on the axial constraints imposed on the fibre. Little difference in the rate of stabilization is observed as measured by density or oxygen uptake for fibres with different extents of orientation, lateral order or restraint. Fibres containing itaconic add, a stabilization catalyst did show an increased rate of stabilization. Inferences have been drawn regarding additional research pertaining to achieving high order in precursor fibres, minimizing orientational relaxation during oxidative stabilization, and the techniques for monitoring the extents of the stabilization treatment and the changes in relevant morphological parameters.     

Long-term transients in a reactor under forced concentration cycling

In the approach to a cycle-invariant state in the forced feed concentration cycling of the CO oxidation over a NiO catalyst, a very long transient has been observed lasting 80 ks or more. This transient appears to be associated only with CO pretreatment of the catalyst and is not a general phenomenon. The slow convergence to the cycle-invariant state reported in certain modelling calculations in the literature appears to have a different cause.     

Printed Electrochemical Devices Using Conducting Polymers as Active Materials on Flexible Substrates

This paper reports some of our initial works in pursuit of a simple and low-cost method of fabricating all-organic electrochemical diodes, triodes, and transistors on flexible plastic or paper substrates. Conducting polymer poly(3,4-ethylenedioxythiophene) poly(styrene sulfonate) (PEDOT : PSS), utilized as an active component, is deposited by spin-coating or printing techniques. The devices are directly fabricated from design without the need for masks, patterns, or dies. The output characteristics of both half-wave and full-wave rectifier circuits from two-terminal diodes show stable performances at frequencies below 5 Hz. In three-terminal tunable triodes, threshold voltage can be tuned in the range between 0.25 and 1.6 V. In four-terminal transistors, ambipolar operation function can be realized in one single device. I/sub ON//I/sub OFF/ current ratios of 10/sup 3/-10/sup 4/ have been achieved in the triode and transistor at operating voltages below 3 V. In addition, the device applications in electrochromic displays, logical circuits, as well as the switching speed of the circuits and device stability, are discussed.     

Low-cost, high-efficiency quasi-planar array of waveguide-fed circularly polarized microstrip antennas

A low-cost quasiplanar Ku-band array of circularly polarized microstrip antennas benefiting from a low-loss waveguide feed network is demonstrated (patent pending). The 32 elements of the array which are arranged in a 2-by-16 configuration are subdivided into four two-by-four subarrays. To maintain feed losses and thus the overall noise temperature at a minimum, the subarrays are excited using a one-by-four corporate feed network of hollow metallic waveguides. This network is composed of E-plane components such as Tee-junctions and bends and is manufactured out of only two metallic pieces that accommodate the feed network in the form of milled grooves. Because of insensitivity of the exploited E-plane components to air gaps or slight misalignments, the pieces are secured together with only four screws without welding, braising, or conducting adhesives. Owing to a low-loss foam substrate, the array elements show high circular polarization gain of 9 dBic and wide relative bandwidth of 4%. To achieve circular polarization, use is made of circular patches with two nearly perpendicular perturbations. Using sequential rotation of the elements along with quadrature phase shifting, the axial ratio of the array is reduced to 1 dB over 4% of bandwidth. The measured circular polarization gain of the array amounts to 23 dBic with an aperture efficiency of 63% in the Ku-band of frequencies. The achieved efficiency, which is higher than the reported efficiency for comparable planar arrays with microstrip feed networks, can be credited to the low losses of only 0.2 dB in its waveguide corporate feed. The paper also presents measurement results for an arrangement of two inclined single arrays mounted in parallel. This configuration which has a measured circular polarization gain of 25.7 dBic with an axial ratio of 1 dB is desirable for mobile low-profile antenna systems.     

Nicholas Hobbs (1915–1983).

Presents an obituary for Nicholas Hobbs. Just at the end of his stellar career of public service through psychology, Nick Hobbs received very appropriate honors showing that psychologists and many others knew what a precious national resource his life had been. Only days before his death from cancer on January 23, 1983, he participated in the dedication of the Nicholas Hobbs Laboratory of Human Development of the Peabody College for Teachers of Vanderbilt University, part of the Kennedy Center for Research on Education and Human Development that he founded and directed at its beginning. Two years earlier, he had received two parallel American Psychological Association (APA) awards--one for Distinguished Contributions to Psychology in the Public Interest and another for Distinguished Professional Contributions "utilizing psychological knowledge in the public interest and social policy." As the citations and testimonials on these occasions variously noted, Nick gave creative, responsible, and effective service to the institutions that he helped administer, to the Southern region from which he sprang, to the APA, and to the profession of psychology, but above all to the nation's children and youth, especially those who grew up with disadvantage and difficulty. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Wavelength-switchable fiber laser using acoustic waves

We report a wavelength-switchable fiber ring laser that includes a Bragg grating-based acoustooptic superlattice modulator. Wavelength switching of the laser emission is achieved by controlling the peak reflectivity of the different reflection bands that appear on both sides of the Bragg wavelength when a longitudinal acoustic wave propagates along the grating.     

Photoconductive Terahertz antenna with radial symmetry

It has been demonstrated recently that it is possible to guide broadband Terahertz pulses utilising a novel coaxial waveguide. This technique is hindered by the difficulty in exciting the radially polarised fundamental mode of the waveguide. To optimise mode matching, a novel radially symmetric photoconductive Terahertz antenna is proposed. Using finite element method simulations and analytical calculations, it is shown that this antenna can generate the desired radial polarisation.     

Retention of Escherichia coli in municipal sewage by means of planted soil filters in two-stage pilot plant systems.

Different types of constructed wetlands in a pilot-plant system were fed with identical municipal waste water to compare the sanitisation process in two-stage systems. With combinations of a vertical and a horizontal flow filter an E. coli reduction of 5 log10 with an E. coli influent concentration of 10(7) MPN/100 ml was achieved. Using different filter materials in each stage the total performance of the two-stage system was independent from the sequence of these materials. However, using coarser filter material in the first stage makes the filter less prone to clogging and is thus the preferential option with regard to operational reliability.