2‐Acetyl‐4,6,8,10,12‐Pentanitro‐Hexaazaisowurtzitane (PNAIW) Preparation and Properties

2‐Acetyl‐4,6,8,10,12‐pentanitro‐2,4,6,8,10,12‐hexaazaisowurtzitane (PNAIW) is formed in the last step of nitration of acetyl isowurtzitane derivatives. The amount of the PNAIW formed depends on the conditions of the nitration reaction (temperature, time, and nitrating mixture used) and on the type of the starting acetyl intermediate. The highest PNAIW yields (30 %) were obtained by nitrating 2,6,8,12‐tetraacetylhexaazaisowurtzitane (TAIW) at 60 °C for half an hour using HNO₃/H₂SO₄ nitrating mixture. HPLC, NMR, FTIR, and DSC measurements were used in the study and their results are reported.     

Hydrostatic pressure influence on electric relaxation response of bismuth manganite ceramics

Electrical impedance of bismuth manganite ceramics was studied under ambient and high hydrostatic pressure. Local disorder of crystal lattice was confirmed using XRD and DSC. Two relaxation processes were discerned. One was attributed to small polarons, which showed a changeover from variable range hopping features related to Fermi glass and structural disorder to the nearest neighbor hopping behavior in higher temperature range related to uniform distribution of energy levels. Hydrostatic pressure shortened relaxation times that would be interesting for applications. The second process, which was assigned to the nearest neighbor hopping of polarons, also exhibited a changeover to glassy features in a high-temperature range.     

Multicomponent bulk metal nitride (Nb1/3Ta1/3Ti1/3)N1−δ synthesis via reaction flash sintering and characterizations

In this research, near fully dense single phase bulk multicomponent transition metal nitride (Nb_1/3Ta_1/3Ti_1/3)N_1−δ has been successfully synthesized from mixed commercial powders of NbN, TaN and TiN via reaction flash sintering technique. This was performed with an applied pressure of ~ 35 MPa at 25°C under a constant DC electric field (~24-32 V/cm). The flash event, which is the abrupt increase in current (up to ~ 25.2 A/mm²) and temperature, occurred without preheating. The threshold power dissipation on the sample right before the flash is ~ 0.7 W/mm³. The formation of single phase (Nb_1/3Ta_1/3Ti_1/3)N_1−δ random solid solution and its compositional uniformity were confirmed by XRD and EDS, respectively. The effects of ball milling duration and limiting current density on phase formation were studied. Simulation based on Joule heating provides an estimate of the ultimate sample temperature of ~ 1850°C. Vickers hardness of the obtained (Nb_1/3Ta_1/3Ti_1/3)N_1−δ is 17.6 ± 0.6 GPa, which is comparable to similarly flash sintered ingredient binary nitrides of TaN and NbN. TGA in air shows that the oxidation resistance of (Nb_1/3Ta_1/3Ti_1/3)N_1−δ is better than that of TaN and NbN but inferior to TiN. The study demonstrates that reaction flash sintering can be a highly efficient technique for synthesizing bulk multicomponent ceramics for both material fundamental investigations and application development.     

Development of a Mullite-Corundum Mortar for Cementing Mullite-Corundum Components

Studies are conducted to develop the optimum composition of a mullite-corundum mortar for cementing mullite-corundum engineering components. It is shown that the optimum composition for cementing vibrocast components of complex configuration is the MMK85-1-grade mullite-corundum mortar (TU U 14-7-178–99 Specifications) based on a phosphate binder. A technique is proposed by which unburnt components, preliminarily dried and calcined, are cemented into a one-piece product of particularly complex configuration.     

A new generation of fibers from alginic acid for dressing materials

We developed and elaborated manufacturing conditions for the production of alginic acid fibers with high sorption properties. The fibers' tenacity obtained at a level of 16 cN/tex is suitable for textile processing these fibers, and will make it possible to produce a new generation of highly absorptive dressing materials. The presence of acid groups in the fiber‐forming material allows us to use them for the addition of new generation antibiotics, which makes it possible to extend the antibacterial effects of these fibers. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Application of zirconium (IV) acetylacetonate to the copolymerization of glycolide with ɛ-caprolactone and lactide

Summary A study on the copolymerization of glycolide with lactide and glycolide with ɛ-caprolactone was performed in the presence of zirconium (IV) acetylacetonate at moderate temperatures (100° and 150°C). Zirconium acetylacetonate appeared to be an efficient initiator of copolymerization. The obtained polymers were characterized by high molecular weights. Considerable influence of transesterification on the polymer chain microstructure was found. Received: 13 October 1998/Revised version: 4 January 1999/Accepted: 4 January 1999     

Damage localization for beams based on the wavelet correlation operator

The continuous wavelet transform (CWT) is one of the crucial damage identification tools in the vibration-based damage assessment. Because of the vanishing moment property, the CWT method is capable of featuring damage singularity in the higher scales, and separating the global trends and noise progressively. In the classical investigations about this issue, the localization property of the CWT is usually deemed as the most critical point. The abundant information provided by the scale-domain information and the corresponding effectiveness are, however, neglected to some extent. Ultimately, this neglect restricts the sufficient application of the CWT method in damage localization, especially in noisy conditions. In order to address this problem, the wavelet correlation operator is introduced into the CWT damage detection method as a post-processing. By means of the correlations among different scales, the proposed operator suppresses noise, cancels global trends, and intensifies the damage features for various mode shapes. The proposed method is demonstrated numerically with emphasis on characterizing damage in noisy environments, where the wavelet scale Teager-Kaiser energy operator is taken as the benchmark method for comparison. Experimental validations are conducted based on the benchmark data from composite beam specimens measured by a scanning laser vibrometer. Numerical and experimental validations/comparisons present that the introduction of wavelet correlation operator is effective for damage localization in noisy conditions.     

Role of HMOX1 Promoter Genetic Variants in Chemoresistance and Chemotherapy Induced Neutropenia in Children with Acute Lymphoblastic Leukemia

Whilst the survival rates of childhood acute lymphoblastic leukemia (ALL) have increased remarkably over the last decades, the therapy resistance and toxicity are still the major causes of treatment failure. It was shown that overexpression of heme oxygenase-1 (HO-1) promotes proliferation and chemoresistance of cancer cells. In humans, the HO-1 gene (HMOX1) expression is modulated by two polymorphisms in the promoter region: (GT)n-length polymorphism and single-nucleotide polymorphism (SNP) A(−413)T, with short GT repeat sequences and 413-A variants linked to an increased HO-1 inducibility. We found that the short alleles are significantly more frequent in ALL patients in comparison to the control group, and that their presence may be associated with a higher risk of treatment failure, reflecting the role of HO-1 in chemoresistance. We also observed that the presence of short alleles may predispose to develop chemotherapy-induced neutropenia. In case of SNP, the 413-T variant co-segregated with short or long alleles, while 413-A almost selectively co-segregated with long alleles, hence it is not possible to determine if SNPs are actually of phenotypic significance. Our results suggest that HO-1 can be a potential target to overcome the treatment failure in ALL patients.     

Resveratrol Affects Insulin Signaling in Type 2 Diabetic Goto-Kakizaki Rats

Resveratrol is a biologically active diphenolic compound exerting multiple beneficial effects in the organism, including anti-diabetic properties. This action is, however, not fully elucidated. In the present study, we examined effects of resveratrol on some parameters related to insulin signaling, and also on diabetes-associated dysregulation in Goto-Kakizaki (GK) rats with congenital type 2 diabetes. Resveratrol was given at the dose of 20 mg/kg b.w. for 10 weeks. It was shown that the expression and phosphorylation levels of insulin receptor in the skeletal muscle of GK rats were significantly decreased, compared with control animals. However, these changes were totally prevented by resveratrol. Liver expression of the insulin receptor was also reduced, but in this case, resveratrol was ineffective. Resveratrol was also demonstrated to significantly influence parameters of insulin binding (dissociation constant and binding capacity) in the skeletal muscle and liver. Moreover, it was shown that the expression levels of proteins related to intracellular glucose transport (GLUT4 and TUG) in adipose tissue of GK rats were significantly decreased. However, treatment with resveratrol completely abolished these changes. Resveratrol was found to induce normalization of TUG expression in the skeletal muscle. Blood levels of insulin and GIP were elevated, whereas proinsulin and GLP-1 diminished in GK rats. However, concentrations of these hormones were not affected by resveratrol. These results indicate that resveratrol partially ameliorates diabetes-associated dysregulation in GK rats. The most relevant finding covers the normalization of the insulin receptor expression in the skeletal muscle and also GLUT4 and TUG in adipose tissue.     

Combinations of Piperine with Hydroxypropyl-β-Cyclodextrin as a Multifunctional System

Piperine is an alkaloid that has extensive pharmacological activity and impacts other active substances bioavailability due to inhibition of CYP450 enzymes, stimulation of amino acid transporters and P-glycoprotein inhibition. Low solubility and the associated low bioavailability of piperine limit its potential. The combination of piperine with 2-hydroxypropyl-β-cyclodextrin (HP-β-CD) causes a significant increase in its solubility and, consequently, an increase in permeability through gastrointestinal tract membranes and the blood–brain barrier. X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FT-IR), nuclear magnetic resonance (NMR) were used to characterize interactions between piperine and HP-β-CD. The observed physicochemical changes should be combined with the process of piperine and CD system formation. Importantly, with an increase in solubility and permeability of piperine as a result of interaction with CD, it was proven to maintain its biological activity concerning the antioxidant potential (2,2-diphenyl-1-picryl-hydrazyl-hydrate assay), inhibition of enzymes essential for the inflammatory process and for neurodegenerative changes (hyaluronidase, acetylcholinesterase, butyrylcholinesterase).