Organic–silicate hybrid catalysts based on various defined structures for Knoevenagel condensation

Two types of organic–inorganic hybrid base catalysts are prepared. Organic-functionalized molecular sieves (OFMSs), particularly “amine-immobilized porous silicates”, are designed based on common idea to immobilize catalytic active sites on silicate surface. Silicate–organic composite materials (SOCMs), such as “ordered porous silicate–quaternary ammonium composite materials”, are the precursors of ordered porous silicates obtained during the synthesis. Both the OFMS and the SOCM are used as the catalysts for Knoevenagel condensation. Among the OFMSs, there is clear tendency that the use of molecular sieve with larger pore volume and/or surface area gives the product in higher yield. Aminopropylsilyl (AP)-functionalized mesoporous silicates such as AP-MCM-41 gives the product in high yield under mild conditions. No loss of activity is observed after repeated use for three times. The SOCMs are also active for the same reaction. The precursors of the mesoporous silicates are more active than those of microporous silicates. This material can be repeatedly used without significant loss of activity. High activity is not due to the leached species. The active sites of the SOCM catalysts are considered to be SiO⁻ moieties located on the pore-mouth. Activity of the SOCM increases when the reaction is carried out without solvent, whereas decrease in activity of the OFMS is observed in the solvent-free system.     

Synthesis and Magneto-mechanical Properties of Ce-TZP/La M-Type Hexaferrite Composite

An in situ composite composed of ceria-stabilized tetragonal zirconia polycrystals (Ce-TZP) and La{Co_0.5Fe_0.5(Fe_0.9Al_0.1)₁₁}O₁₉ was synthesized from a powder mixture of Ce-TZP, La(Fe_0.9Al_0.1)O₃, Fe₂O₃, Al₂O₃, and CoO. The dense Ce-TZP dispersed with platelike La{Co_0.5Fe_0.5(Fe_0.9Al_0.1)₁₁}O₁₉ crystals as a second phase were formed after sintering from 1250° to 1350°C. The saturation magnetization of the in situ composite Ce-TZP/La{Co_0.5Fe_0.5(Fe_0.9Al_0.1)₁₁}O₁₉ was proportional to the mass fraction of the hexaferrite second phase in Ce-TZP. The coercivity of the composite with a 20 mass% of second phase decreased from 9.14 to 2.52 kOe (from 728 to 201 kA/m) after the pulverization of the composite. The susceptibility (χ) increased by 15%–25% under uniaxial stress on the composite. The change of the susceptibility (Δχ/χ) value increased with decreasing the mass fraction of the second phase in the composite. The Δχ was found to increase linearly with applied stress and abruptly change on cracking, which is expected for the application in fracture sensing of the composite.     

Surface Orientation and Wetting Phenomena in Si/α-Alumina System at 1723 K

Wetting phenomena and the effect of alumina surface orientation on the wettability in Si/α-Al₂O₃ system were studied by an improved sessile drop method using     ,     , C(0001) faces of single crystals and polycrystals at 1723 K in a reducing Ar–3% H₂ atmosphere. The contact angles show a vibration behavior for all the single crystals but to a less extent for the polycrystals. The extent of the vibration correlates not only with the reaction intensity but also with the stability of the Si droplet on the alumina surfaces. The interfacial reaction leads to the formation of a series of reaction rings, which is more serious at the single crystal surfaces. More importantly, the wettability is dependent on the alumina surface orientation, with the intrinsic contact angles being about 98±2°, 101±1°, 69±1°, and 98±2°, respectively, for the     ,     , C(0001) and polycrystal α-Al₂O₃ substrates. The much smaller contact angle for molten Si on the C(0001) surface is explained by the favorable reduction in the Si/α-Al₂O₃ interfacial free energy by the terminated and enriched aluminum atoms at the reconstructed     surface. The importance of the aluminum presence at the Si/α-Al₂O₃ interface to the wettability of this system was further demonstrated by a substantial improvement in the wettability of the     α-Al₂O₃ substrates by Si–Al alloys.     

Phase evolution and <110>-orientation mechanism in RTGG-processed BaTiO3 ceramics with electrical properties

The <110>-oriented BaTiO₃ ceramics were fabricated using BaCO₃ matrix and H_1.08Ti_1.73O₄.nH₂O (HTO) template particles, and the mechanism of BaTiO₃ phase formation was investigated. The dielectric, ferroelectric, and piezoelectric properties were also investigated. The transformation of the HTO phase into the TiO₂ bronze or TiO₂ (B) phase was observed at 600°C, where the BaTiO₃ nucleation was accompanied by the formation of a Ba₂TiO₄ phase. The TiO₂ phase reacted with the Ba₂TiO₄ phase at 800°C to give a BaTiO₃ phase, whereas its reaction with the BaTiO₃ resulted in the formation of BaTi₂O₅ phase that got decomposed into BaTiO₃ and Ba₆Ti₁₇O₄₀ phase at sintering temperature ≥1300°C. Sintering with samples’ embedding in BaTiO₃ powders prevented the formation of the Ba₆Ti₁₇O₄₀ secondary phase. The crystallographic orientation along the <110> direction (F₁₁₀) was developed by the epitaxial grain growth mechanism. In addition to the contribution of the grain-size increment for enhancing the F₁₁₀, the preservation of the platelike structure was also found to have a significant impact. The ceramics prepared by the embedded sintering (grain size ≈12.4 µm and F₁₁₀ = 83%) exhibited the room-temperature dielectric constant of 1708 and piezoelectric strain constant of 445 pm/V, which are higher than those of the BaTiO₃ ceramics with randomly oriented grains.     

Influences of temperature and Sn-addition on microstructural evolution of Ag during FSW

ABSTRACT

The microstructural evolutions of pure Ag and Ag-0.75 wt-%Sn during rapid cooling friction stir welding (FSW) were examined. At the lower welding temperature of FSW conditions, the annealing twinning was highly suppressed and the microstructural evolution was dominated by the discontinuous dynamic recrystallisation (DDRX) via the high angle boundary (HAB) bulging. The fully recrystallised microstructure was remarkably finer than that formed through the frequent annealing twinning at the higher welding temperature. Moreover, the Sn-addition caused the HAB bulging due to the inhibition of dynamic recovery and decreased mobility of grain boundaries. With decreasing the ratio of the peak temperature to the recrystallisation temperature, the dominant grain refinement mechanism is implied to change from the annealing twinning to the DDRX.     

Adsorption of four perfluorinated acids on non ion exchange polymer sorbents

Perfluorinated compounds (PFCs) have attracted global concern due to their ubiquitous distribution and properties of persistence, bio accumulation and toxicity. The process of adsorption has been identified as an effective technique to remove PFCs in water. Different non ion-exchange polymeric adsorbents were tested with regard to their sorption kinetics and isotherms at low PFCs concentrations. Selected PFCs were perfluorobutanoic acid (PFBA), perfluoroheptanoic acid (PFHpA), perfluorooctanoic acid (PFOA) and perfluorodecanoic acid (PFDA) and the tested polymers were three types of Dowex optopores (V-493, V503, and L493), Amberlite XAD-4, and Filtrasorb 400 (Granular Activated Carbon-GAC). We observed the selective adsorption of PFCs on synthetic polymers. For PFDA, Amberlite XAD-4 gave the Freundlich adsorption constant of 2,965 (microg PFCs/g sorbent)(microg PFCs/L)(-n), which was higher than that of GAC (121.89 (microg PFCs/g sorbent) (microg PFCS/L)(-n)). In the case of PFBA, GAC showed better performance (13.36) (microg PFCs/g sorbent) microg PFCS/L)(-n) than synthetic polymers (0.62-5.23) (microg PFCs/g sorbent) (microg PFCS/L)(-n). Adsorption kinetics of all adsorbents were well described (R2 = 0.85-1) by pseudo-second order kinetic model. Sorption capacity was influenced by initial PFCs concentration for all adsorbents. GAC reached the equilibrium concentration within 4 hours, Amberlite XAD 4 reached it within 10 hours and other polymers took more than 70 hours.     

Gradient-index rod lens with a high acceptance angle for color use by Na(+) for Li(+) exchange

The relationship between the characteristics of gradient-index rod lenses obtained by ion exchange and their mother glass compositions is studied. It is observed that Li(2)O content, R(2)O (Li(2)O + Na(2)O) content, and the Li(2)O/Na(2)O ratio are important factors in attaining a high acceptance angle and a small field curvature. Thus the gradient-index lens array is fabricated by the use of a newly developed glass composition and its optical performance; the modulation transfer function, luminous intensity, and chromatic aberration are precisely evaluated. The array is found to have a sufficiently high performance to be applicable for color use.     

Heparan sulfate proteoglycan on endothelium efficiently induces integrin-mediated T cell adhesion by immobilizing chemokines in patients with rheumatoid synovitis

OBJECTIVE: To clarify the role of heparan sulfate proteoglycan (HSPG) and chemokines in integrin-mediated T cell adhesion to endothelial cells in the synovium of patients with rheumatoid arthritis (RA). METHODS: Endothelial cells were purified from RA synovium. Expression of heparan sulfate, chemokines, and adhesion molecules on the endothelium was assessed by immunohistochemical analysis or flow cytometry. The effects of chemokines and heparan sulfate on T cell adhesion to RA endothelium were estimated with relevant antibodies and signaling inhibitors. Production of chemokines from synovial T cells was detected by Northern blotting and enzyme-linked immunosorbent assay. RESULTS: The endothelium in RA synovium highly expressed HSPG. The soluble form of chemokines, macrophage inflammatory protein 1beta (MIP-1beta), induced T cell adhesion to the endothelial cells. When MIP-lalpha and MIP-1beta were immobilized on RA endothelial cells, a more efficient integrin-mediated adhesion of T cells was induced compared with their soluble form. The induced T cell adhesion was reduced by pretreatment with either heparitinase, anti-MIP-lalpha antibody, or anti-MIP-lbeta antibody, indicating that these chemokines were bound to heparan sulfate on the cells. T cell adhesion was also inhibited by pertussis toxin, wortmannin, and cytochalasin B. MIP-lalpha and MIP-1beta were found on vessels in RA synovium in vivo, which were spontaneously produced from T cells purified from RA synovium. CONCLUSION: Endothelial cells in RA synovium characteristically express HSPG, which is involved in T cell integrin triggering by "posting" chemokines, which are produced by synovial T cells, and by "relaying" them to their receptors on T cells, which activate G protein-dependent phosphoinositide 3-kinase and actin-dependent integrin triggering.     

Quantitative determination of cardiac glycosides in Digitalis lanata leaves by reversed-phase thin-layer chromatography

We have recently chosen to undertake a comprehensive evaluation of the modulation of gene expression by oxidative stress, using mRNA as a marker. Our model system is HA-1 hamster fibroblasts, using conditions under which we observe an adaptive response. Under these conditions, the HA-1 cells respond to a minimally toxic "pretreatment" dose of hydrogen peroxide by synthesizing RNAs and proteins that protect them against subsequent exposure to a highly cytotoxic concentration of hydrogen peroxide. Using the differential display technique to screen for modulated RNAs, we have recently reported an RNA species, adapt15/gadd7, whose steady-state level is significantly induced by a pretreatment dose of hydrogen peroxide (D. R. Crawford, G. P. Schools, S. L. Salmon, and K. J. A. Davies (1996) Arch. Biochem. Biophys. 325, 256-264). Here we report a second induced mRNA, designated adapt33. Two homologous adapt33 mRNAs were revealed by Northern blot hybridization. Both of these species were inducible by hydrogen peroxide, and they were sized at 1.46 and 0.99 kb. These inductions appeared to be dependent upon calcium, occurred as early as 90 min, and were maximal at 5 h. Cell fractionation revealed that a significant proportion of adapt33 RNA is associated with active translation. adapt33 is a novel sequence, as determined by cloning, sequencing, and GenBank analysis. adapt33 represents a new oxidant-inducible RNA and marker of cellular oxidative stress and a potential aid in the study, detection, and possible therapy of oxidant-related disorders.