Gel permeation chromatography of polyoxymethylene

Gel permeation chromatography of polyoxymethylene has been studied using N,N-dimethylformamide as the solvent. Polyoxymethylene samples used here are a copolymer of tetraoxane with 1,3-dioxolane and a commercial polyoxymethylene whose molecular weight distributions are moderately broad. Their intrinsic viscosities [η] range from 1.4 to 2.8 dl/g. Factors affecting chromatograms are discussed, and the operating conditions were determined by using the analytical scale GPC. On the basis of these operating conditions, the molecular weight fractionation of polyoxymethylene was carried out by using the preparative scale GPC. It was found that polyoxymethylene can be effectively fractionated to give seven to ten fractions each of them containing the fractionated polymer ranging in weight from 0.2 to 8 mg when 40 mg polymer sample was used for a run of the measurement. The fractionated polymers were also found to have a narrow molecular weight distribution within a single peak, and their M_w/M_n values decrease with increasing molecular weight.     

Two types of a passive safety containment for a near future BWR with active and passive safety systems

The paper presents two types of a passive safety containment for a near future BWR. They are named Mark S and Mark X containment. One of their common merits is very low peak pressure at severe accidents without venting the containment atmosphere to the environment. The PCV pressure can be moderated within the design pressure. Another merit is the capability to submerge the PCV and the RPV above the core level. The third merit is robustness against external events such as a large commercial airplane crash. Both the containments have a passive cooling core catcher that has radial cooling channels. The Mark S containment is made of reinforced concrete and applicable to a large power BWR up to 1830 MWe. The Mark X containment has the steel secondary containment and can be cooled by natural circulation of outside air. It can accommodate a medium power BWR up to 1380 MWe. In both cases the plants have active and passive safety systems constituting in-depth hybrid safety (IDHS). The IDHS provides not only hardware diversity between active and passive safety systems but also more importantly diversity of the ultimate heat sinks between the atmosphere and the sea water. Although the plant concept discussed in the paper uses well-established technology, plant performance including economy is innovatively and evolutionally improved. Nothing is new in the hardware but everything is new in the performance.     

Effect of wall wettability condition on drift-flux parameters in lead–bismuth two-phase flow in circular and annular bubble columns

Lead–bismuth two-phase flow in a cylindrical vessel and annulus was experimentally investigated by varying the surface wettability of the vessel wall. The test section used in this study was a cylindrical stainless vessel with/without inner sleeve to change the hydraulic diameter. Volume-averaged void fraction was measured by varying the surface wettability of the test section, which was enhanced by using a soldering flux. Measured void fraction was compared with existing two-phase flow correlations and with one-dimensional theoretical simulations assuming one-dimensional drift-flux model. From experimental results, measured distribution parameters of the lead–bismuth two-phase flow are much larger than that of ordinary two-phase flow regardless of the surface wettability. In the present work, the one-dimensional analysis was carried out for the cylindrical vessel to reproduce the distribution parameter. From the simulation results, predicted value for the cylindrical vessel showed good agreement with experimental results. However, in annulus, the distribution parameters in annulus were underestimated by the present model. It was suggested that, in case of annulus, steeper void fraction profile might be formed near the inner surface for poor wettability condition.     

The Association of Cholesterol Uptake and Synthesis with Histology and Genotype in Cortisol-Producing Adenoma (CPA)

Cortisol-producing adenoma (CPA) is composed of clear and compact cells. Clear cells are lipid abundant, and compact ones lipid poor but associated with higher production of steroid hormones. PRKACA mutation (PRKACA mt) in CPA patients was reported to be associated with more pronounced clinical manifestation of Cushing’s syndrome. In this study, we examined the association of histological features and genotypes with cholesterol uptake receptors and synthetic enzymes in 40 CPA cases, and with the quantitative results obtained by gas chromatography-mass spectrometry (GC-MS) analysis in 33 cases to explore their biological and clinical significance. Both cholesterol uptake receptors and synthetic enzymes were more abundant in compact cells. GC-MS analysis demonstrated that the percentage of compact cells was inversely correlated with the concentrations of cholesterol and cholesterol esters, and positively with the activity of cholesterol biosynthesis from cholesterol esters. In addition, hormone-sensitive lipase (HSL), which catalyzes cholesterol biosynthesis from cholesterol esters, tended to be more abundant in compact cells of PRKACA mt CPAs. These results demonstrated that both cholesterol uptake and biosynthesis were more pronounced in compact cells in CPA. In addition, more pronounced HSL expression in compact cells of PRKACA mt CPA could contribute to their more pronounced clinical manifestation.     

Cytoskeletal Protein 4.1G Is Essential for the Primary Ciliogenesis and Osteoblast Differentiation in Bone Formation

The primary cilium is a hair-like immotile organelle with specific membrane receptors, including the receptor of Hedgehog signaling, smoothened. The cilium organized in preosteoblasts promotes differentiation of the cells into osteoblasts (osteoblast differentiation) by mediating Hedgehog signaling to achieve bone formation. Notably, 4.1G is a plasma membrane-associated cytoskeletal protein that plays essential roles in various tissues, including the peripheral nervous system, testis, and retina. However, its function in the bone remains unexplored. In this study, we identified 4.1G expression in the bone. We found that, in the 4.1G-knockout mice, calcium deposits and primary cilium formation were suppressed in the trabecular bone, which is preosteoblast-rich region of the newborn tibia, indicating that 4.1G is a prerequisite for osteoblast differentiation by organizing the primary cilia in preosteoblasts. Next, we found that the primary cilium was elongated in the differentiating mouse preosteoblast cell line MC3T3-E1, whereas the knockdown of 4.1G suppressed its elongation. Moreover, 4.1G-knockdown suppressed the induction of the cilia-mediated Hedgehog signaling and subsequent osteoblast differentiation. These results demonstrate a new regulatory mechanism of 4.1G in bone formation that promotes the primary ciliogenesis in the differentiating preosteoblasts and induction of cilia-mediated osteoblast differentiation, resulting in bone formation at the newborn stage.     

Molecular Hydrogen Enhances Proliferation of Cancer Cells That Exhibit Potent Mitochondrial Unfolded Protein Response

Molecular hydrogen ameliorates pathological states in a variety of human diseases, animal models, and cell models, but the effects of hydrogen on cancer have been rarely reported. In addition, the molecular mechanisms underlying the effects of hydrogen remain mostly unelucidated. We found that hydrogen enhances proliferation of four out of seven human cancer cell lines (the responders). The proliferation-promoting effects were not correlated with basal levels of cellular reactive oxygen species. Expression profiling of the seven cells showed that the responders have higher gene expression of mitochondrial electron transport chain (ETC) molecules than the non-responders. In addition, the responders have higher mitochondrial mass, higher mitochondrial superoxide, higher mitochondrial membrane potential, and higher mitochondrial spare respiratory capacity than the non-responders. In the responders, hydrogen provoked mitochondrial unfolded protein response (mtUPR). Suppression of cell proliferation by rotenone, an inhibitor of mitochondrial ETC complex I, was rescued by hydrogen in the responders. Hydrogen triggers mtUPR and induces cell proliferation in cancer cells that have high basal and spare mitochondrial ETC activities.     

Coordinate-Based Evaluation of Two Dimensional Artefact Calibration Value as the Reference Standards for Coordinate Measuring Machines

Two dimensional standards are important materials which are used in the calibration and the verification of coordinate measuring machines. In several countries, the national metrology institutes or accredit laboratories provide the calibration services of the two dimensional standards such as ball plates, hole plates and grid plates. The metrological equivalence of the measurement standards among the calibration providers is validated through the key comparison program. In the previous key comparison for a ball plate and a hole plate, the equivalences among the participants’ calibration results were verified on the distances between the No. 1 ball/hole (i.e., the origins of the workpiece coordinates) and other balls/holes on the plates respectively. The essential measurands of the two dimensional standards are the coordinates of the feature points, however, the measurement equivalences on them have not been verified. In this study, the authors propose the coordinates-based evaluation of the reference values and their uncertainty in two dimensional standard calibration comparison.     

Equilibrium and kinetic studies of selective adsorption and separation for strontium using DtBuCH18C6 loaded resin

A crown ether loaded resin was prepared by successive impregnation and fixing the 4′,4′(5″)-di(tert-butylcyclohexano)-18-crown-6 (DtBuCH18C6) and its molecule modifier, 1-dodecanol, onto the porous silica/polymer composite support (SiO₂-P particles). The characterization of DtBuCH18C6 loaded resin was examined by thermal gravimetry and differential thermal analysis and electron probe microanalysis. The adsorption behavior of Sr(II), Cs(I), Ru(III), Pd(II), La(III), Nd(III), Sm(III), Gd(III), Zr(IV), and Mo(VI) was investigated by the batch method. Furthermore, the column test for Sr (II) was performed. The batch experiments were carried out by varying the shaking times, HNO₃ concentration, and initial concentration of metal ions. A relatively large K _d value above 182 cm³/g for Sr(II) was obtained in the presence of 3 M HNO₃. In contrast, the K _d values of Cs(I), Ru(III), Pd(II), La(III), Nd(III), Sm(III), Gd(III), Zr(IV), and Mo(VI) were considerably lower than 10 cm³/g. The adsorption of Sr(II) was found to be controlled by chemisorption mechanism, and followed a Langmuir-type adsorption equation. The breakthrough curve of Sr(II) had S-shaped profile, and the elution percentage was estimated to be 99.9% by using the eluent of H₂O.     

Full Eulerian deformable solid-fluid interaction scheme based on building-cube method for large-scale parallel computing

We propose a full Eulerian incompressible solid-fluid interaction scheme capable of achieving high parallel efficiency and easily generating meshes for complex solid geometries. While good scalability of a full Eulerian solid-fluid interaction formulation has been reported by Sugiyama et al, their analysis was carried out using uniform Cartesian mesh and an artificial compressibility method. Typically, it is more challenging to achieve good scalability for hierarchical Cartesian meshes and a fully incompressible formulation. In addition, the conventional full Eulerian methods require a large computational cost to resolve complex solid geometries due to the usage of uniform Cartesian meshes. In an attempt to overcome the aforementioned issues, we employ the building-cube method, where the computational domain is divided into cubic regions called cubes. Each cube is divided at equal intervals, the same number of cubes is assigned to each core, and the spatial loop processing is executed for each cube. The numerical method is verified by computing five numerical examples. In the weak scaling test, the parallel efficiency at 32768 cores with 32 cores as a reference is 93.6%. In the strong scaling test, the parallel efficiency at 32768 cores with 128 cores as a reference is 70.2%.     

Potent antioxidative activity of non‐polyphenolic fraction of green tea (Camellia sinensis) – association with pheophytins a and b

The antioxidative activity of green tea‐derived polyphenols known as catechins has been extensively studied. However, the antioxidative activity of the non‐polyphenolic fraction of green tea has been poorly elucidated and is the subject of the present study. The non‐polyphenolic fraction of green tea showed a significant dose‐dependent suppressive effect against the autooxidation of linoleic acid. The chlorophyll‐related compounds pheophytins a and b showed similar antioxidative activities in the same assay, much higher than those of α‐tocopherol and the green tea catechin (−)‐epigallocatechin‐3‐gallate (EGCG). The non‐polyphenolic fraction of green tea and pheophytins a and b exhibited suppressive activities against superoxide anion (${\bf O}_{2}ˆ{‐}$ ) generation in mouse macrophages induced by 12‐O‐tetradecanoylphorbol‐13‐acetate, showing higher activities than that of EGCG. These results suggest that the non‐polyphenolic fraction of green tea leaves has potent antioxidative activity and that this activity is associated with pheophytins a and b. © 2000 Society of Chemical Industry