Restoration of the red colour of photo-bleached carthamine in calcium-alginate gel membranes

The restoration of the red colour of carthamine (photo-bleached in polymeric heterosaccharide gels) was investigated using sodium salts, potassium salts, and alkali. Ca-alginate gel was stained with carthamine, and the red-dish membranes were exposed to fluorescent light for 2·5, 4·0 and 20 h (at 28°C). The resulting orange-yellow gel membranes were treated with Na- or K-citrate solution and the restoration of the red colouration was followed spectrophoto-metrically. The results indicate that the red colour of carthamine can be retained within the gel membranes, while yellow-coloured compounds were removed and/or transformed by the alkaline salt solutions.     

Metallized ultra-shallow-junction device technology for sub-0.1μm gate MOSFET's

This paper describes a new ultra-thin SOI-CMOS structure offering reduced parasitic diffusion-layer resistance. It addresses ways to deal with the ultra-shallow junctions required by sub-0.1 μm MOSFET's. Based on a CVD tungsten process we experimentally investigate the characteristics of selectively grown tungsten used in the source and drain region made in SOI layers of various thicknesses ranging from 10 to 100 nm. We also investigate certain CMOS device characteristics. The SOI-CMOS structure, with low parasitic diffusion-layer resistance and good contact characteristics for ultra-shallow junction devices exhibits superior device performance and high scalability     

Surface Hardening of Carbon Steel Using High Powered YAG Laser

A high powered YAG laser with kaleidoscope for surface modification was applied to the surface hardening of carbon steels containing 0. 18-0.54 wt% C without the absorbents, and the relationships between laser processing and surface hardening were investigated by hardness and microstructure. The structure of the hardened zone underwent complete martensitic transformation in all of the carbon steels tested, and its hardness increased with greater carbon content. Under identical irradiated conditions, the hardened zone expanded with increasing carbon content. A hardened zone extending from the surface to a depth of 1.0 mm was obtained at a laser power of 1.0 kW and a scanning speed of 1 mm/sec. It was found that in the surface hardening of carbon steels, a high powered YAG laser can be used to control the hardened zone by selecting the appropriate irradiation conditions, however, the hardened zone was affected by the assistant gas and the flow rate.     

Metabolism of tetramethrin isomers in rat: IV. Tissues responsible for formation of reduced and hydrated metabolites

1. To identify the sites of formation of the reduced metabolites, 3-hydroxy-cyclohexane-1,2-dicarboximide (3-OH-HPI-1 and -2), 1,2-cyclohexanedicarboxylic acid (TCDA) and 1-hydroxy-1,2-cyclohexanedicarboxylic acid (1-OH-HPA), in rat treated with 14C-labelled (1RS, trans)-tetramethrin, [3,4,5,6-tetrahydrophthalimidomethyl (1RS, trans)-chrysanthemate], bile-duct cannulated animals were orally or intravenously administered 14C-labelled 3,4,5,6-tetrahydrophthalimide (TPI) or 3,4,5,6-tetrahydrophthalic acid (THPA), precursors of these metabolites, and bile, urine and faeces were collected for analysis. 2. 3-OH-HPI-1 and 3-OH-HPI-2, which are cis-form reduced metabolites, and 1-OH-HPA were detected in bile and urine samples of the bile-cannulated rat treated intravenously and orally with 14C-labelled TPI, indicating their formation in tissues or blood. TCDA, a trans-form reduced metabolite, was not detected in bile, urine or faeces of the bile-cannulated rat treated intravenously with 14C-THPA, but was found in the faeces after oral application, indicating formation in the gastrointestinal tract. 3. To clarify whether 1-OH-HPA is produced from THPA via TCDA (hydroxylation via reduction) or by direct addition of H2O to its double bond (hydration), rats were orally administered 14C-labelled TCDA, and metabolites in urine and faeces were analysed. The observed lack of 1-OH-HPA indicated formation by direct addition of H2O to the double-bond of THPA. 4. To specify which tissues form reduced and hydrated metabolites, in vitro metabolism studies were carried out. Reduction to the cis-form was found to take place in blood cells, reduction to the trans-form took place in the gastrointestinal tract contents, and hydration took place in the liver and the intestinal tract contents.     

Preparation and properties of transparent cellulose hydrogels

Highly transparent cellulose hydrogels with physical crosslinkage were prepared from nonaqueous organic cellulose solutions and viscose by coagulating and regenerating cellulose in an aqueous solution containing a water‐miscible organic solvent. Nonaqueous organic cellulose solutions used were LiCl/dimethylacetamide, paraformaldehyde/dimethyl sulfoxide, and triethylammonium chloride/dimethyl sulfoxide. Preparation conditions and physical properties of the transparent cellulose hydrogels were studied. The transparency of the cellulose hydrogels depended on the composition of the aqueous solution containing the organic solvent. Furthermore, transparent cellulose hydrogels from viscose showed high tensile strength. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3020–3025, 2003     

The structure and maximal gain of CW-pumped GaP-AlGaP semiconductor Raman amplifier with tapers on both sides

GaP-AlGaP waveguide semiconductor Raman amplifiers (SRAs) tapered on both sides were fabricated by high-quality GaP-AlGaP liquid phase epitaxial growth using the temperature difference method with controlled vapor pressure (TDM-CVP), photolithography patterning, and reactive ion etching with PCl/sub 3/ gas. Although the finesse of the both-sides-tapered waveguide SRA is lower than previous values for straight or one-side-tapered waveguides, the CW-pumped gain was maximized, and a maximal gain of 4.2 dB was obtained. This letter presents the effect of tapered structures in SRA with CW pumping amplification.     

AP的安全制备（英）

1 IntroductionThe ammonium perchlorate ( AP)-based compositepropellant is currently the most widely used one becausethis propellant has good burning characteristics and me-chanical properties. One of the few serious drawbacks ofthe AP-based propellant is that its products of combus-tion, which include HCl, chlorine, and chlorine oxides,cause atmospheric pollution. Increasing concern for aclean atmosphere in recent years has resulted in a com-pelling need for developing a chlorine-free,enviro…     

Characterization of temporal response, spectral responsivity and its spatial uniformity in photoconductive diamond detectors

Three photoconductive diamond detectors with highly oriented diamond (HOD) films fabricated by the same process were characterized with respect to temporal response, spectral responsivity and its spatial uniformity over the wavelength range from 190 to 250 nm. Temporal measurements showed a drift in the baseline, suggesting the presence of deep level carrier traps. The responsivity of specimen No. 2 was more than twice those of the other two specimens, but it showed an unpredictable current fluctuation. It was found that the spatial uniformities of all the specimens were too low for radiometric purposes. A prominent peak, thought to be due to photoemission, was found in the responsivity spatial distribution of specimen No. 3 under a negative applied voltage.     

High-performance polymer alloys of polybenzoxazine and bismaleimide

Two series of high-performance polymer alloys were prepared by mixing typical benzoxine monomers, 3-phenyl-3,4-dihydro-2H-1,3-benzoxazine (P-a) or 6,6-(1-methylethyliden)-bis-(3,4-dihydro-3-phenyl-2H-1,3-benzoxazine) (B-a), with a typical bismaleimide, 4,4-bismaleimidodiphenyl methane by various ratios followed by thermal treatment up to 240 °C. DSC and IR of the alloys were examined to follow the curing reaction. These analyses showed that the obtained polymer alloys are AB co-cross-linked polymer networks through the formation of ether linkage between the hydroxyl group of polybenoxazine and the double bond of bismaleimide. Viscoelastic analysis and softening temperature measurement revealed that the polymer alloys have much higher glass transition temperatures than those of each homopolymer. The thermal stability also increased with the increase of bismaleimide content as evidenced by TGA.