电弧炉中废钢料的元素监测

评估了激光诱导击穿光谱（LIBS）在废钢料分析中的使用,以用于电弧炉中废钢料的元素监测。开发了一个LIBS原型用于现场试验,并将其安装在位于废钢料填充区和电弧炉之间的钟摆式输送槽上。LIBS原型距离电弧炉大约25 m。废钢料填充的钟摆式输送槽的宽度和深度分别为大约2 m和1 m。调整废钢料的平均速率在0.3～5.5 m/min的范围内,使之满足电弧炉的装填要求,从而使废钢料的生产能力达到100 t/h。在安装地点,低合金废钢料中高含量硅的检测基本上对电弧炉控制的改进很有帮助。由于测量体积受限在600×600×180 mm³,研发的原型仅检测了一小部分的钢料表面。但是,在线LIBS测量还是显示了在工业环境下测定高硅废钢料样品的能力。为了拓展在加料、过程控制及管理上的应用,应增加测量体积从而进一步提高其性能。     

Sleep-related car crashes: risk perception and decision-making processes in young drivers

The aim of the present study is to analyse factors affecting worries, coping strategies and decisions of young drivers regarding the risk of sleep-related car crashes. Furthermore, the study also analyses whether framing the same information about sleepiness in two different linguistic forms influences: (1) the evaluation of the level of risk associated to a specific level of drowsiness (Attribute Framing problem); (2) the willingness to enact strategies to "prevent" sleepiness before night-time driving (Goal Framing problem); (3) the choice between two different ways, both of equal expected efficacy, of lowering drowsiness (Risky decision-making Framing problem). Six hundred and ninety-five young drivers [(57.6% females, 42.4% males); mean age 20.85 years (S.D.=1.2)] answered questions on drive risk perception and sleepiness, on nocturnal driving experience and on the strategies to deal with driver sleepiness, responding to one of the two different versions of the framed problems. A sub-sample of 130 participants completed the framed problems in both versions. The results show that experiences of sleep attacks and nocturnal driving frequency in the past 6 months affect both risk perception and the preventive strategies adopted. Furthermore, the manipulation on two out of the three problems (attribute and risky decision-making frames) significantly affected the respondents' evaluation.     

GMTR: two-dimensional geo-fit multitarget retrieval model for michelson interferometer for passive atmospheric sounding/environmental satellite observations

We present a new retrieval model designed to analyze the observations of the Michelson Interferometer for Passive Atmospheric Sounding (MIPAS), which is on board the ENVironmental SATellite (ENVISAT). The new geo-fit multitarget retrieval model (GMTR) implements the geo-fit two-dimensional inversion for the simultaneous retrieval of several targets including a set of atmospheric constituents that are not considered by the ground processor of the MIPAS experiment. We describe the innovative solutions adopted in the inversion algorithm and the main functionalities of the corresponding computer code. The performance of GMTR is compared with that of the MIPAS ground processor in terms of accuracy of the retrieval products. Furthermore, we show the capability of GMTR to resolve the horizontal structures of the atmosphere. The new retrieval model is implemented in an optimized computer code that is distributed by the European Space Agency as "open source" in a package that includes a full set of auxiliary data for the retrieval of 28 atmospheric targets.     

FEMMINA real-time, radio-frequency echo-signal equipment for testing novel investigation methods

Fast echographic multiparameter multi-image novel apparatus (FEMMINA), is a hardware and software platform dedicated to ultrasonic signal and image processing. FEMMINA is able to operate with sequences of radiofrequency (RF) frames. Its architecture is designed to be modular, expandable, and aimed at implementing different ultrasonic investigation techniques. The first experimental characteristic of this system is in its capability to operate in real time with ultrasonic RF signals, starting from acquisition up to processing, storage, and visualization. The second characteristic is the user-system interactivity that allows one to modify the operation appropriately while observing results. Currently, FEMMINA works in both typical experimental situations to study novel investigation techniques and clinical field to validate the proposed methods in different human districts.     

Sample treatment considerations in the analysis of organic colorants by surface-enhanced Raman scattering

The introduction of surface-enhanced Raman spectroscopy (SERS) in the field of cultural heritage has significantly improved the analysis of the organic dyes and their complexes that have been used as textile dyes and pigments in paintings and other polychrome works of art since antiquity. Over the last five years, a number of different procedures have been developed by various research groups. In this Article, we evaluate the effect of pretreating samples by exposing them to hydrofluoric acid (HF) vapor prior to SERS analysis, a step designed to hydrolyze the dye-metal complexes and increase analyte adsorption on the nanosized metallic support, thus enhancing the SERS signal. Materials studied include pure colorants, commercial lake pigments, and fibers from dyed textiles, as well as actual aged samples, such as microscopic fragments of lakes on paper and ancient pigments and glazes from several works of art, covering a wide range of time, from the second century B.C. to the early 20th century. In each case, SERS spectra obtained with or without HF hydrolysis were critically evaluated. The pretreatment with HF vapor resulted in faster analysis and increased sensitivity in most cases, with the exception of dyed silk fibers, where silk protein hydrolyzates were found to interfere with SERS analysis. As a final point, a two-step procedure including SERS on untreated and treated samples is proposed as a standard approach: by analyzing a sample first without hydrolysis, and then, following removal of the colloid, upon HF treatment, the best and most reliable results for a great number of dyes and substrates are assured.     

Construction of xylose dehydrogenase displayed on the surface of bacteria using ice nucleation protein for sensitive D-xylose detection

A novel method was developed to detect d-xylose (INS 967) sensitively and selectively, which is based on a xylose dehydrogenase (XDH) cell-surface displaying system using a newly identified ice nucleation protein from Pseudomonas borealis DL7 as an anchoring motif. With coenzyme NAD(+), the XDH-displayed bacteria facilitates the catalysis of the oxidization of xylose and the resultant NADH can be detected spectrometrically at 340 nm. The fusion protein was characterized by proteinase accessibility, Western blot, and enzyme activity assays. The established XDH surface displaying system did not inhibit the growth of the recombinant Escherichia coli strain. The XDH was mainly displayed on the surface of host cells, which is of high XDH activity and high D-xylose specificity. The optimal temperature and pH of cell displayed XDH were found at 30 °C and pH 8.0, respectively. The XDH-displayed bacteria can be used directly without further enzyme extraction and purification, and it improved the stability of the enzyme. Moreover, the cell-surface-displayed-protein-based approach showed a wide linear range (5-900 μM) and a low detection limit of 2 μM of d-xylose. More importantly, the recombinant cells could be used for precise detection of D-xylose from the real samples such as foods and degradation products of lignocellulose. The method shown here provides a simple, rapid, and low-cost strategy for the sensitive and selective measurement of D-xylose. In addition, the XDH-displayed bacteria showed an interesting response in developing electrochemical biosensors. Thus, the genetically engineered cells may find broad application in such biosensors and biocatalysts. Similarly, this type of genetic approach may be used for the expression of other intracellular enzymes of interest for certain purposes.     

How To Find a Needle (or Anything Else) in a Haystack: Two-Dimensional Correlation Spectroscopy-Filtering with Iterative Random Sampling Applied to Pharmaceutical Heparin

Risks of contamination of the major clinical anticoagulant heparin can arise from deliberate adulteration with unnatural or natural polysaccharides, including heparin from other animal sources, other natural products, or artifacts of manufacture, and these can escape detection by conventional means. Currently, there is no generally applicable, objective test recommended by regulators that can detect these in pharmaceutical heparin, and this continues to leave heparin exposed to contamination risks. Two-dimensional correlation spectroscopic-filtering with iterative random sampling (2D-COS-firs) is reported. It employs a difference covariance matrix with iterative random sampling, and is capable of revealing contamination in pharmaceutical heparin to a high level of sensitivity irrespective of the nature of those features. The technique is suitable to any situation in which a comparison of a single entity to a family of heterogeneous entities, particularly natural products and biosimilars, needs to be made, and will find application in pharmaceutical monitoring, manufacturing quality control, materials science, biotechnology, and metabolomic investigations.     

Survey of the interventional cardiology procedures in Italy

Interventional cardiology procedures are increasing because they offer many advantages to patients compared with other techniques: therefore the Italian National Institution for Insurance against Accidents at Work decided to start a survey for monitoring the state-of-the-art regarding the professionals involved in those procedures. The survey covered six cardiology and medical physics Italian departments. Each centre was asked to record 10 examinations for five types of procedures: coronary angiography (CA), electrophysiology studies (ES), pacemaker implantation (PI), percutaneous transluminal coronary angioplasty (PTCA) and radiofrequency catheter ablation (RA). For each examination all the centres were requested to fill in a questionnaire containing information regarding the operator performing the examination, the patient and the procedure. A total of 290 examinations were recorded: 103 CA, 14 ES, 68 PI, 79 PTCA and 26 RA. As occupational doses are strongly related to patient doses, both patients and operators radiation dose data are reported. Ratios of maximum to minimum mean patient doses across the hospitals surveyed were 2.0, 3.9, 7.0, 1.8 and 1.4 for CA, ES, PI, PTCA and RA, respectively. The calculated rounded mean dose-area product values across all participating hospitals were comparable with other values reported in the literature. In general, specific radiation protection tools were used by all operators performing different procedures in all hospitals. A major issue in this survey was the absence of information about correlation between staff and patient doses in a single procedure: future studies could be more aimed to prospective goals where occupational exposures per procedure are monitored specifically.     

Structural characterization of In2O3 hierarchical microwires synthesized through decomposition thermal treatment of InSe single crystal

In this paper, we report the obtention of In₂O₃ nanostructured microwires by the decomposition thermal treatment of InSe single crystal in two-steps under an oxygen–ammonia flow without the presence of any catalyst. Long In₂O₃ microwires with uniform shape and homogeneous surface were first synthesized through thermal treatment of InSe single crystal at temperature of about 640 °C; then, furnace temperature was increased to 750 °C and, as annealing time proceeded, the obtained microwires served as substrates on which nanorod branches grew. The shape and the structure of the microarchitectures were characterized by means scanning electron microscopy, transmission electron microscopy, selected area diffraction pattern, X-Ray diffraction and Raman spectroscopy. Our results indicated that In₂O₃ primary wires with a clean surface grew in the [100] direction and that the secondary protuberances grew in the [011] direction. A possible growth mechanism of the hierarchical microwires was also proposed.