Development and evaluation of terminally epoxidized triglycerides for coatings applications

Epoxidized 10-undecenoic acid triglyceride, an experimental seed oil derivative that has a terminal epoxy group on each of the three acyl glyceride segments, has been found to have good reactivity with amine curatives and allows room temperature cures to be obtained. Coatings based on epoxidized 10-undercenoic acid triglyceride have also shown excellent UV stability. As an example, coatings samples placed in a QUVA chamber exhibit no loss in gloss after 3000 hr of a cycled exposure to high intensity UV lamps and moisture at temperatures of 50–60°C. In comparison, coatings based on standard liquid epoxy resins (LERs) and commercially available hydrogenated LERs lose gloss due to chalking/decomposition within 200–800 hr. Presented at the 81 st Annual Meeting of the Federation of Societies for Coatings Technology, November 12–14, 2003, in Philadelphia, PA.     

Degradation of a textile azo dye by pulsed arc discharge to the surface of wastewater

The pulsed arc discharge to the surface of wastewater was applied to the degradation of a textile azo dye (Acid Red 27). A high-voltage electrode (discharging electrode) was vertically placed above the surface of the wastewater while the wastewater itself was grounded. The pulsed arc discharge occurred between the tip of the discharging electrode and the surface of the wastewater, producing various oxidative species. Oxygen was used as the working gas instead of air to prevent nitrogen oxides from forming. The effect of several parameters on the chromaticity and chemical oxygen demand (COD) removal was examined. The results obtained showed that the chromaticity of the wastewater was completely removed by this process and the COD also decreased significantly. It has been found that ozone formed in the gas phase mainly affects the removal of the dye. The contribution of other effects such as ultraviolet light emission and OH radical formation during the arc discharge to the degradation of the dye was found to be less than 15%. For the present reactor system, the optimum pH, pulse repetition rate and agitation speed were found to be 3.0, 110 Hz and 300 rpm, respectively.     

Temporal evolution of contacts and communities in networks of face-to-face human interactions

Temporal dynamics of social interaction networks as well as the analysis of communities are key aspects to gain a better understanding of the involved processes, important influence factors, their effects, and their structural implications. In this article, we analyze temporal dynamics of contacts and the evolution of communities in networks of face-to-face proximity. As our application context, we consider four scientific coil- ferences. On a structural level, we focus on static and dynamic properties of the contact graphs. Also, we analyze the resulting community structure using state-of-the-art automatic community detection algorithms. Specifically, we analyze tile evolution of contacts and communities over time to consider the stability of the respective conmmnities. Furthermore, we assess different factors which have an influence on the quality of com- munity prediction. Overall, we provide first important insights into the evolution of contacts and communities in face-to-face contact networks.     

Geraniol interferes with membrane functions in strains ofCandida andSaccharomyces

Geraniol, an olefinic terpene, was found to inhibit growth ofCandida albicans andSaccharomyces cerevisiae strains. Geraniol was shown to enhance the rate of potassium leakage out of whole cells and also was shown by fluorescence polarization to increaseC. albicans membrane fluidity. Biophysical studies using differential scanning calorimetry, fluorescence polarization and osmotic swelling of phospholipid vesicles demonstrated that geraniol decreased the phase-transition temperature of dipalmitoylphosphatidylcholine vesicles, affected fluidity throughout the bilayer, particularly the central portion of the bilayers, and caused an increase in bilayer permeability to erythritol. Geraniol may have potential use as an antifungal agent.     

Efficiency of mineral admixtures in mortars: Quantification of the physical and chemical effects of fine admixtures in relation with compressive strength

This work is the fourth part of an overall project the aim of which was the development of general mix design rules for concrete containing different kinds of mineral admixtures. The two first parts presented the separation and quantification, by means of an empirical model based on semi-adiabatic calorimetry measurements, of the different physical effects responsible for changes in cement hydration (short terms) when chemically inert quartz powders were used in mortars. Part three dealt with an intensive experimental program, presenting and commenting more than 2000 compressive strength measurements. This program concerned 1 day to 6 months old mortars containing up to 75% of inert and pozzolanic admixtures. All these compressive strength results are analyzed in this fourth part and the influence of three effects, namely dilution, heterogeneous nucleation and the pozzolanic effect, are discriminated and quantitatively evaluated. An efficiency concept is proposed in order to take into account the effect of mineral admixture in mortars from both the physical and chemical points of view. It uses an efficiency function ξ(p) that has notable properties: it is independent of time, independent of fineness and independent of the type of mineral admixture.     

Crop residue,manure and fertilizer in dryland maize under reduced tillage in northern China: I grain yields and nutrient use efficiencies

The rapidly increasing population and associated quest for food and feed in China has led to increased soil cultivation and nitrogen (N) fertilizer use, and as a consequence to increased wind erosion and unbalanced crop nutrition. In the study presented here, we explored the long-term effects of various combinations of maize stover, cattle manure and nitrogen (N) and phosphorus (P) fertilizer applications on maize (Zea mays L.) yield and nutrient and water use efficiencies under reduced tillage practices. In a companion paper, we present the effects on nutrient balances and soil fertility characteristics. The ongoing factorial field trial was conducted at Shouyang Dryland Farming Experimental Station in northern China from 1993 onwards. The incomplete, determinant-optimal design comprised 12 treatments, including a control treatment, in duplicate. Grain yields and N, P, and potassium (K) uptakes and N, P and K use efficiencies were greatly influenced by the amount of rain during the growing season (GSR), and by soil water at sowing (SWS). There were highly significant interactions between GSR and added stover and manure, expressed in complex annual variations in grain yield and N, P and K use efficiencies. Annual mean grain yields ranged from 3,000 kg ha⁻¹ to 10,000 kg ha⁻¹ and treatment mean yields from 4,500 kg ha⁻¹ to 7,000 kg ha⁻¹. Balanced combination of stover (3,000–6,000 kg), manure (1,500–6,000 kg) and N fertilizer (105 kg) gave the highest yield. Stover and manure were important for supplying K, but the effects differed greatly between years. Overall mean N recovery efficiency (NRE) ranged from 28% to 54%, depending on N source. NRE in wet years ranged from 50% to 90%. In conclusion, balanced combinations of stover, manure and NP fertilizer gave the highest yield and NRE. Reduced tillage with adding stover and manure in autumn prior to ploughing is effective in minimizing labor requirement and wind erosion. The potentials of split applications of N fertilizer, targeted to the need of the growing crop (response farming), should be explored to further increase the N use efficiency.     

Purification of 2-mercaptobenzothiazole by solvent extraction

−Purification of 2-mercaptobenzothiazole (91.9% purity) by solvent extraction was studied. The extraction of impurities present in crude 2-MBT (e.g. benzothiazole, sulfides and sulfur containing compounds) was carried out at temperatures between 70-180°C using various solvents and their mixtures of different polarity. The highest purity of 2-MBT, above 99% was obtained using nitrobenzene, toluene and ethanol, even at a concentration of 2-MBT above 50 wt%. Increasing temperature and decreasing concentration of the raw material have a positive influence on the purification process. A comparable efficiency of purification was observed also with mixed solvents, (toluene with ethanol, acetone and aniline) possessing the same polarities. A correlation between the polarity indexes (PI) of mixed solvents and experimentally obtained purity of 2-MBT was found. The highest purity of 2-MBT provides extraction of the raw material with mixed solvents having PI 3.8-4.4.     

Synthesis and properties of chitosan-modified poly(vinyl butyrate)

Modification of chitosan by grafting of vinyl butyrate was carried out in homogeneous phase using potassium persulfate as redox initator and 1.5% acetic acid as solvent. The percent grafting and grafting efficiency were analysed and the high grafting efficiency up to 94% was observed. The effects of reaction variables such as monomer concentration, initiator concentration, temperature and reaction time were investigated. It was observed that the solubility of chitosan was markedly reduced after grafting with vinyl butyrate. The grafted product is insoluble in common organic solvents as well in dilute organic and inorganic acids. Characterization of the graft copolymers were carried out by using Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC) and Scanning Electron Microscopy (SEM) technics. Characteristic signal of carbonyl group was observed at 1,731 cm⁻¹ which belongs to the poly vinyl butyrate segments in the graft copolymer. The melting transition of the chitosan main chain in the copolymer shifted to 124°C from its original value 101°C. In addition to these, we have also studied topology of the graft copolymer and the SEM micrograph showed continuous homogenous matrix which means there is no phase separation.     

Increased hydropower production and hydropeaking mitigation along the Upper Inn River (Tyrol,Austria) with a combination of buffer reservoirs,diversion hydropower plants and retention basins

Research on hydropeaking in Austria started in the 1990s and the implementation of the WFD stipulated large research projects since the year 2009. The first research projects supported the process understanding and in a second investigation step, measures were evaluated. The mountains in the region of Tyrol create large heads and thus support the production of flexible energy. In this region, TIWAG is operating 9 large (>10 MW) and 27 small (<10 MW) hydropower plants, with an installed capacity of about 1,550 MW and a mean annual production of 3,000 GWh. As the governmental energy strategy foresees an extension of the hydropower production in Austria, suitable options were selected in 2004 by TIWAG and the water management framework plan for Western Tyrol was developed. This strategic planning instrument proposes five large power plants, with a generation of 1,800 GWh/year of renewable energy, which enables to reach the WFD targets, because the concept includes hydropeaking mitigation by combining buffer reservoirs (impoundments), diversion hydropower plants, and retention basins. We present our promising concept of hydropeaking mitigation and exemplify this based on the GKI, a hydropeaking diversion hydropower plants (HPP) at the Swiss/Austrian border as well as the Silz hydropeaking retention basin, with a volume of about 300,000 m³. As the presented case studies are the largest measures for hydropeaking mitigation being currently implemented in Central Europe, they have pilot-character. Thus, ongoing research and monitoring programs are expected to improve the knowledge about hydropeaking mitigation.     

Slip homogenization in Al-Li alloys by thermomechanical treatment and its effect on mechanical behaviour

The affects of a pre-ageing stretch and of duplex ageing on slip distribution have been examined in the Al-Li-Cu-Mg-Zr alloy 8090 peak aged at 170 °C. Stretching prior to ageing and duplex ageing were found to effectively homogenize the distribution of S in these alloys. In contrast, in unstretched materials that were not duplex aged, precipitation of S was intense on the grain and subgrain boundaries but scarce elsewhere.Tensile, cyclic stress-strain, long fatigue crack growth and small fatigue crack growth data were gathered. These data showed that slip was planar in the unstretched and duplex-aged materials as compared to materials that were stretched prior to ageing. A model is developed to calculate the diameter where Orowan looping of the S precipitates was likely to give way to shearing of those precipitates. Based on this model, it was concluded that, although the distribution of S precipitates was homogeneous in the duplex-aged materials, the precipitates were too fine to effectively homogenize slip. It was also shown that if the artificial ageing temperature was increased to 190 °C the S precipitates were thicker, leading to a change in deformation behaviour.