Fractionation and enrichment of CLA isomers by selective esterification with Candida rugosa lipase

A commercial product of CLA contains almost equal amounts of cis-9,trans-11 (c9,t11)-CLA and trans-10,cis-12 (t10,c12)-CLA. We attempted to enrich the two isomers by a two-step selective esterification using Candida rugosa lipase that acted on c9,t11-CLA more strongly than on t10,c12-CLA. An FFA mixture containing CLA isomers was esterified with an equimolar amount of lauryl alcohol in a mixture of 20% water and the lipase. When the esterification of total FA reached 50%, two isomers were fractionated in a good yield: t10,c12-CLA was enriched in FFA, and c9,t11-CLA was recovered in lauryl esters. The FFA were esterified again to enrich t10,c12-CLA. At 27.3% esterification of total FA, the t10,c12-CLA content in FFA increased to 64.8 wt% with 89.3% recovery: The ratio of the content of t10,c12-CLA to that of two isomers was 95.9%. Lauryl esters obtained by the single esterification were employed for enrichment of c9,t11-CLA. After the esters were hydrolyzed, the resulting FFA were esterified again with lauryl alcohol. At 62.0% esterification of total FA, the c9,t11-CLA content in lauryl esters increased to 73.3 wt% with 79.4% recovery: The ratio of the content of c9,t11-CLA to that of two isomers was 95.6%. In a 600-g-scale purification, molecular distillation was effective in separating the reaction mixture into lauryl alcohol, FFA, and lauryl ester fractions.     

Electrochemical micromachining using a solid electrochemical reaction at the metal/β″-Al2O3 microcontact

A simple solid state technique for electrochemical micromachining of metal substrates using a metal ion conductor (Na-β″-Al₂O₃) was proposed. The fundamental solid electrochemical cell consists of a (anode) metal substrate (M = Ag, Cu, Zn, and Pb)/pyramidal Na-β″-Al₂O₃/Ag (cathode) system, where the contact diameter between M/Na-β″-Al₂O₃ was extremely small, on the order of a few micrometer. Under an applied electric field, the metal substrate was electrochemically oxidized to metal ions (Mⁿ⁺) at the M/Na-β″-Al₂O₃ microcontact. These Mⁿ⁺ ions migrated into the Na-β″-Al₂O₃. As a result of continuous electrolysis, the metal substrate was locally consumed at the microcontact, and thus solid state electrochemical micromachining was accomplished. As expected, the machining size or depth depended on the electrolysis conditions (current, operating time) and the apex configuration of pyramidal Na-β″-Al₂O₃. Moreover, the scanning of the Na-β″-Al₂O₃ pyramid during electrolysis produced a fine patterned metal substrate. In the present paper, solid state electrochemical micromachining was performed for several metal substrates, and its advantages and disadvantages vis-a-vis the conventional electrochemical micromachining method are discussed in detail.     

Parametric polynomial spectral factorization using the sum of roots and its application to a control design problem

This paper presents an algebraic approach to polynomial spectral factorization, an important mathematical tool in signal processing and control. The approach exploits an intriguing relationship between the theory of Gröbner bases and polynomial spectral factorization which can be observed through the sum of roots, and allows us to perform polynomial spectral factorization in the presence of real parameters. It is discussed that parametric polynomial spectral factorization enables us to express quantities such as the optimal cost in terms of parameters and the sum of roots. Furthermore an optimization method over parameters is suggested that makes use of the results from parametric polynomial spectral factorization and also employs two quantifier elimination techniques. This proposed approach is demonstrated in a numerical example of a particular control problem.     

Patient views of adverse events: comparisons of self-reported healthcare staff attitudes with disclosure of accident information

In the present paper, we report results of surveys in 2003 in Japan and Denmark about patients' views about adverse events, focusing on the actions of healthcare staff involved in a medical accident. Results show that patients were more likely to indicate negative expectations to a doctor's reactions after a medical accident when asked in general terms than when asked in relation to concrete case stories. When asked in general terms, 66% (47%) of Japanese (Danish) respondents expected that doctors sometimes hold back on providing information to patients about a medical accident, while 37% (7%) did so when asked about a concrete, mild-outcome case. We examine some possible reasons for the relatively high level of distrust of Japanese patients, and we discuss whether the seemingly lower level of disclosure in Japan than in Denmark and the negative stories in the Japanese press may have an impact. We also suggest some implications for introducing a patient-centred or customer-centred approach to risk management in healthcare and other domains.     

A high‐performance sorting algorithm for multicore single‐instruction multiple‐data processors

Many sorting algorithms have been studied in the past, but there are only a few algorithms that can effectively exploit both single‐instruction multiple‐data (SIMD) instructions and thread‐level parallelism. In this paper, we propose a new high‐performance sorting algorithm, called aligned‐access sort (AA‐sort), that exploits both the SIMD instructions and thread‐level parallelism available on today's multicore processors. Our algorithm consists of two phases, an in‐core sorting phase and an out‐of‐core merging phase. The in‐core sorting phase uses our new sorting algorithm that extends combsort to exploit SIMD instructions. The out‐of‐core algorithm is based on mergesort with our novel vectorized merging algorithm. Both phases can take advantage of SIMD instructions. The key to high performance is eliminating unaligned memory accesses that would reduce the effectiveness of SIMD instructions in both phases. We implemented and evaluated the AA‐sort on PowerPC 970MP and Cell Broadband Engine platforms. In summary, a sequential version of the AA‐sort using SIMD instructions outperformed IBM's optimized sequential sorting library by 1.8 times and bitonic mergesort using SIMD instructions by 3.3 times on PowerPC 970MP when sorting 32 million random 32‐bit integers. Also, a parallel version of AA‐sort demonstrated better scalability with increasing numbers of cores than a parallel version of bitonic mergesort on both platforms. Copyright © 2011 John Wiley & Sons, Ltd.     

Fractional power approximation and its generation

For an analog simulating system, an approximating system is proposed. Its mathematical form is expressed by an algebraic equation:

$\text{? (x) ≈ α + β χ + γχ}{}^{\mathrm{k}}$

with four parameters given by real numbers. Their values can be determined so as to satisfy a best fit in a Chebyshev sense. Then, the accuracy is of the same order with that obtained by any kind of ordinary power series up to terms o f the third order. It is noticeable that a given function can be accurately approximated by this equation without destroying its uniform continuity.As its electronic system, it is possible to utilize forward current-voltage characteristics o f p-n diodes near their origins. Different functions can be produced by adjusting an amount o f ordinary resistances connected to diodes in series.     

Leak-tightness characteristics concerning the containment structures of the HTTR

The containment structures of the HTTR consist of the reactor containment vessel, the service area, and the emergency air purification system, which minimise the release of fission products in postulated accidents, which lead to fission product release from the reactor facilities. The reactor containment vessel is designed to withstand the temperature and pressure transients and to be leak-tight in the case of a rupture of the primary concentric hot-gas duct, etc. The pressure inside the service area is maintained at a negative pressure by the emergency air purification system. The emergency air purification system will also remove airborne radioactivity and will maintain a correct pressure in the service area.The leak-tightness characteristics of the containment structures are described in this paper. The measured leakage rates of the reactor containment vessel were enough less than the specified leakage limit of 0.1%/d confirmed during the commissioning tests and annual inspections. The service area was kept in a way that the design pressure becomes well below its allowable limitation by the emergency air purification system, which filters efficiency of particle removal and iodine removal well over the limited values.The obtained data demonstrate that the reactor containment structures were fabricated to minimise the release of fission products in the postulated accidents with fission product release from the reactor facilities.     

Thermoelectric Properties of Multifilled Skutterudites with La as the Main Filler

Bulk multifilled n- and p-type skutterudites with La as the main filler were fabricated using the spark plasma sintering (SPS) method. The thermoelectric properties and thermal stability of these skutterudites were investigated. It was found that the interactions among the filling atoms also play a vital role in reducing the lattice thermal conductivity of the multifilled skutterudites. ZT = 0.76 for p-type La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ and ZT = 1.0 for n-type La_0.3Ca_0.1Al_0.1Ga_0.1In_0.2Co_3.75Fe_0.25Sb₁₂ skutterudites have been achieved. Furthermore, the differential scanning calorimetry (DSC) results show that there is no skutterudite phase decomposition till 750°C for the La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ sample. The thermal stability of the La_0.8Ba_0.01Ga_0.1Ti_0.1Fe₃CoSb₁₂ skutterudite is greatly improved. Using the developed multifilled skutterudites, the fabricated module with size of 50 mm × 50 mm × 7.6 mm possesses maximum output power of 32 W under the condition of hot/cold sides = 600°C/50°C.     

Development and Evaluation of a Robust Sandwich Immunoassay System Detecting Serum WFA-Reactive IgA1 for Diagnosis of IgA Nephropathy

Aberrant glycosylation of IgA1 is involved in the development of IgA nephropathy (IgAN). There are many reports of IgAN markers focusing on the glycoform of IgA1. None have been clinically applied as a routine test. In this study, we established an automated sandwich immunoassay system for detecting aberrant glycosylated IgA1, using Wisteria floribunda agglutinin (WFA) and anti-IgA1 monoclonal antibody. The diagnostic performance as an IgAN marker was evaluated. The usefulness of WFA for immunoassays was investigated by lectin microarray. A reliable standard for quantitative immunoassay measurements was designed by modifying a purified IgA1 substrate. A validation study using multiple serum specimens was performed using the established WFA-antibody sandwich automated immunoassay. Lectin microarray results showed that WFA specifically recognized N-glycans of agglutinated IgA1 in IgAN patients. The constructed IgA1 standard exhibited a wide dynamic range and high reactivity. In the validation study, serum WFA-reactive IgA1 (WFA+-IgA1) differed significantly between healthy control subjects and IgAN patients. The findings indicate that WFA is a suitable lectin that specifically targets abnormal agglutinated IgA1 in serum. We also describe an automated immunoassay system for detecting WFA+-IgA1, focusing on N-glycans.