A 2-V, 1-10 GHz BiCMOS transceiver chip for multimode wirelesscommunications networks

This paper concerns the design consideration, fabrication process, and performance results for an ultra-broadband, low-voltage, low-power, BiCMOS-based transceiver chip for cellular-satellite-LAN wireless communication networks. The transceiver chip incorporates an RF amplifier, a Gilbert down-mixer, and an IF amplifier in the receive path, and an IF amplifier, a Gilbert up-mixer, and an RF amplifier in the transmit path. For an RF frequency in the 1-10 GHz band and an IF frequency in the 100-1000 MHz band, the developed transceiver chip consumes less than 60 mW at 2 V, to yield a downconversion gain of 40 dB at 1 GHz and 10 dB at 10 GHz and an upconversion gain of 42 dB at 1 GHz and 11 dB at 10 GHz. To avoid possible start-up problems caused during “stand-by” to “enable” mode transition, a simple switching technique is employed for enabling either the receive or the transmit path, by changing the value of a reference voltage applied to both the down- and the up-mixers. While the developed transceiver chip exhibits the best performance for a dc supply voltage of 2 V, it shows a graceful degradation for a ±0.15 V voltage deviation. The transceiver's chip size is 1.04 mm×1.04 mm     

Systolic array implementation of block LMS algorithm

The authors derive the systolic array implementation of the block LMS algorithm, consisting of N processing elements, where N is the filter order. The resulting array attains an order-independent sampling rate. Computer simulation results show that the block LMS algorithm is faster than the delayed LMS algorithm, which has previously been implemented on systolic arrays     

CW Operation of a Submillimeter Wave Gyrotron (Gyrotron Fu IV) for High Stability of the Output Frequency

The first cw operation of our submillimeter wave gyrotron (Gyrotron FU IV) using a 12 T superconducting magnet has been successfully carried out. Output power is more than 20 W at a frequency of 301 GHz in the TE₀₃₁ resonant cavity mode. Time-resolved frequency measurement s shows that the frequency fluctuation of the gyrotron output is smaller than 2 MHz. This frequency fluctuation is mainly due to the fluctuation in the output voltage of the power supply.     

Structural study of degraded ZnMgSSe blue light emitters

Using electroluminescence (EL) topography and transmission electron microscopy (TEM), we investigated the nonluminescent regions which form while current is being injected into ZnMgSSe/ZnSSe/ZnCdSe-based blue light emitters. Small dark spots were observed just after turn-on and spread out forming rough nonluminescent triangles in the <100> directions in the EL image of the active region. TEM studies showed that the small dark spots are pre-existing stacking faults originating at the substrate/epitaxial layer interface. The nonluminescent triangles were found to be a dense region of dislocation dipoles and dislocation loops. Each dipole was aligned along two <110> directions in the {111} planes. The Burgers vectors were of the type a/2<011> inclined at 45° to the (001) junction plane.     

A 286 mm2 256 Mb DRAM with ×32 both-ends DQ

This paper describes a 256 Mb DRAM chip architecture which provides up to ×32 wide organization. In order to minimize the die size, three new techniques: an exchangeable hierarchical data line structure, an irregular sense amp layout, and a split address bus with local redrive scheme in the both-ends DQ were introduced. A chip has been developed based on the architecture with 0.25 μm CMOS technology. The chip measures 13.25 mm×21.55 mm, which is the smallest 256 Mb DRAM ever reported. A row address strobe (RAS) access time of 26 ns was obtained under 2.8 V power supply and 85°C. In addition, a 100 MHz×32 page mode operation, namely 400 M byte/s data rate, in the standard extended data output (EDO) cycle has been successfully demonstrated     

Suppression of photo-induced dilation in cyanide treated hydrogenated amorphous silicon films

Effects of cyanide (CN) treatment with hydrogenated amorphous silicon (a-Si:H) films have been investigated. The decrease of ΔV/V was observed in cyanide treated a-Si:H films and the successive thermal annealing at 200°C after CN treatment induced the further reduction of the ΔV/V. XPS spectra show the indirect evidence that the cyanide species is present within 10 nm from the hydrogenated amorphous silicon surface. The results of CN treatment with a-Si:H solar cells are demonstrated.     

An unsteady flow structure on a heated rotating disk under mixed convection

A flow field under mixed convection on a heated rotating disk has been measured using an ultrasonic velocity profiler (UVP). The measured velocity field is a spatio‐temporal one as a function of radial coordinates and time. The objective of this paper is to clarify the vortex structure caused by the instability between buoyancy and centrifugal force. The vortex appears under typical conditions of Reynolds numbers and Grashof numbers and it moves toward the outside of the disk. This behavior can be classified into two patterns. The size of the vortex structure decreases with an increasing Reynolds number and increases with the Grashof number. The traveling velocity of the vortex increases with the Grashof number. Moreover, it decreases with an increasing Reynolds number in spite of increasing centrifugal force. According to these results, the region dominated by natural, forced, and mixed convection is classified in the relationship between Reynolds and Grashof numbers. © 2005 Wiley Periodicals, Inc. Heat Trans Asian Res, 34(6): 407–418, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20074     

Optical frequency domain ranging by a frequency-shifted feedbacklaser

This paper describes the theoretical and experimental study of a new technique for optical frequency domain ranging (OFDR) by a frequency-shifted feedback (FSF) laser. In conventional OFDR, a frequency chirped single-mode laser is used as a light source to convert a distance into a beat frequency, and a tradeoff exists between measurement range and resolution. The FSF laser output consists of periodically generated chirped frequency components whose chirp rate is faster than 100 PHz/s (P=10¹⁵), By use of the FSF laser, the tradeoff is removed and long-distance high-resolution OFDR is realized In the experiment, a distance of 18.5 km was measured with a resolution of 20 mm     

Finding module-based gene networks with state-space models - Mining high-dimensional and short time-course gene expression data

This study explores some problems to analyze time-course gene expression data by state-space models (SSMs). One problem is regarding the methods of parameter estimation and determination of the dimension of the internal state variable. Although several methods have been applied, there are few literature studies which with to compare them. Thus, this paper gives a brief review of the existing literature that use the SSM to analyze the gene expression time-course data. Another problem is the identifiability of the model. If the parameters of SSMs are simply estimated without any constraints for parameter space, they lack identifiability. To identify a system uniquely, it requires a specific algorithm to estimate the parameters with some constraints. For that purpose, an identifiable form of SSMs and an algorithm for estimating parameters are derived. The last problem is the extraction of biological information by interpreting the estimated parameters, such as mechanism of gene regulations at the module level. For that one, this paper explores methods to extract further information using the estimated parameters, that is, reconstruction of a module network from time-course gene expression data     

Sub-50-nm physical gate length CMOS technology and beyond usingsteep halo

Sub-50-nm CMOS devices are investigated using steep halo and shallow source/drain extensions. By using a high-ramp-rate spike annealing (HRR-SA) process and high-dose halo, 45-nm CMOS devices are fabricated with drive currents of 650 and 300 μA/μm for an off current of less than 10 nA/μm at 1.2 V with T_ox^inv =2.5 nm. For an off current less than 300 nA/μm, 33-nm pMOSFETs have a high drive current of 400 uA/μm. Short-channel effect and reverse short-channel effect are suppressed simultaneously by using the HRR-SA process to activate a source/drain extension (SDE) after forming a deep source/drain (S/D). This process sequence is defined as a reverse-order S/D (R-S/D) formation. By using this formation, 24-nm nMOSFETs are achieved with a high drive current of 800 μA/μm for an off current of less than 300 μA/μm at 1.2 V. This high drive current might be a result of a steep halo structure reducing the spreading resistance of source/drain extensions