InGaAs angled-grating distributed Bragg reflector lasers integrated with grating outcoupler for collimation

An angled-grating distributed Bragg reflector (DBR) laser integrated with a grating outcoupler (GO) is proposed and demonstrated. It consists of an angled broad-area gain stripe surrounded by angled DBR (/spl alpha/-DBR) gratings parallel to the gain stripe and two DBR gratings for feedback at the stripe ends, and a GO for emitting a collimated output beam. Due to distributed Bragg reflection in the /spl alpha/-DBR gratings, filamentation can be suppressed. Single-mode lasing up to 69 mW peak power was obtained under pulse condition. A collimated output beam with divergence angles, close to the diffraction limit, was obtained. These results confirm the effectiveness of the /spl alpha/-DBR gratings.     

One-step route to a hybrid TiO2/TixW1?xN nanocomposite by in situ selective carbothermal nitridation

Metal oxide/nitride nanocomposites have many existing and potential applications, e.g. in energy conversion or ammonia synthesis. Here, a hybrid oxide/nitride nanocomposite (anatase/Ti_xW_1−xN) was synthesized by an ammonia-free sol–gel route. Synchrotron x-ray diffraction, complemented with electron microscopy and thermogravimetric analysis, was used to study the structure, composition and mechanism of formation of the nanocomposite. The nanocomposite contained nanoparticles (<5 nm diameter) of two highly intermixed phases. This was found to arise from controlled nucleation and growth of a single oxide intermediate from the gel precursor, followed by phase separation and in situ selective carbothermal nitridation. Depending on the preparation conditions, the composition varied from anatase/Ti_xW_1−xN at low W content to an isostructural mixture of Ti-rich and W-rich Ti_xW_1−xN at high W content. In situ selective carbothermal nitridation offers a facile route to the synthesis of nitride-oxide nanocomposites. This conceptually new approach is a significant advance from previous methods, which generally require ammonolysis of a pre-synthesized oxide.     

Effect of Platelet-Rich Plasma on M1/M2 Macrophage Polarization

Osteoarthritis of the knee (OAK) is a chronic degenerative disease and progresses with an imbalance of cytokines and macrophages in the joint. Studies regarding the use of platelet-rich plasma (PRP) as a point-of-care treatment for OAK have reported on its effect on tissue repair and suppression of inflammation but few have reported on its effect on macrophages and macrophage polarization. Based on our clinical experience with two types of PRP kits Cellaid Serum Collection Set P type kit (leukocyte-poor-PRP) and an Autologous Protein Solution kit (APS leukocyte-rich-PRP), we investigated the concentrations of humoral factors in PRPs prepared from the two kits and the effect of humoral factors on macrophage phenotypes. We found that the concentrations of cell components and humoral factors differed between PRPs purified using the two kits; APS had a higher concentration of M1 and M2 macrophage related factors. The addition of PRP supernatants to the culture media of monocyte-derived macrophages and M1 polarized macrophages revealed that PRPs suppressed M1 macrophage polarization and promoted M2 macrophage polarization. This research is the first to report the effect of PRPs purified using commercial kits on macrophage polarization.     

Anthocyanins,but not Anthocyanidins,from Bilberry (Vaccinium myrtillus L.) Alleviate Pruritus via Inhibition of Mast Cell Degranulation

Abstract: We have previously reported that bilberry anthocyanins exhibit an anti‐pruritic effect in a mouse model of allergic contact dermatitis. It has been reported that anthocyanins are particularly sensitive to thermal treatment and are easily hydrolyzed to anthocyanidins when exposed to high temperatures. The objective of this study was to compare the anti‐pruritic effect of anthocyanin‐rich quality‐controlled bilberry extract and anthocyanidin‐rich degraded extract using a mouse model of allergic contact dermatitis. BALB/c mice with allergic contact dermatitis induced by 4 weeks of repeated application of 2,4,6‐trinitro‐1‐chlorobenzene (TNCB) were administered Bilberon‐25 orally for 4 weeks after sensitization with TNCB. The effect of Bilberon‐25 on pruritus was evaluated by measurement of scratching behavior. RBL‐2H3 mast cells were used to investigate the effect of Bilberon‐25 on degranulation in 48/80‐stimulated mast cells. Compared with nonheated Bilberon‐25, the proportion of anthocyanins in heated Bilberon‐25 decreased, and the proportion of anthocyanidins was increased in heated‐time dependent manner. Treatment with non‐heated Bilberon‐25 significantly attenuated the TNCB‐induced increase in scratching behavior, whereas treatment with 2 h‐heated Bilberon‐25 did not. Moreover, 300 μg/mL nonheated Bilberon‐25 showed significant inhibition of degranulation in RBL‐2H3 mast cells, whereas 2 h‐heated Bilberon‐25 had no effect at any concentration studied. It is assumed that the inhibitory effect of bilberry anthocyanins on pruritus might be mediated, at least in part, by its inhibitory effect on mast cell degranulation. In conclusion, the anthocyanin‐rich but not anthocyanidin‐rich bilberry extract may be a useful dietary supplement for skin diseases involving pruritic symptoms, such as chronic allergic contact dermatitis, atopic dermatitis, and rhinitis.     

Pulverization mechanism of hydrogen storage alloys on microscale packing structure

In-situ and transient visualizations of the packing structure of a hydrogen storage alloy bed are carried out using an X-ray computed tomography (CT) system. The packing structure is clearly observed on the microscale using the CT system. When the alloy bed is subjected to hydrogen absorption–desorption cycles, the pulverization progresses from the lower to the upper regions of the bed. After several hydrogen absorption–desorption cycles, the packing structure in the lower region of the bed changes and the microstructural void decreases slightly. Based on these results, we propose a pulverization mechanism of the packed bed in which the friction between particles affects the pulverization process.     

Effects of phosphorus content on generation and growth of cracks in nickel–phosphorus platings owing to thermal cycling

We observed crack generation and structural changes in electroless nickel–phosphorus (Ni–P) plating layers formed on copper-metalized silicon nitride substrates both during thermal cycling from ? 40 to 250 °C and during storage (not cycling) at 250 °C in order to investigate the effect of the phosphorus contents on crack generation and growth in the Ni–P platings. The used platings contained phosphorus at three different contents: 2.1 wt% [Ni–P(low)], 6.5 wt% [Ni–P(med)], and 10.9 wt% [Ni–P(high)]. The generation time and the amount of cracks were strongly dependent on their phosphorus contents. More cracks appeared after thermal cycling than after storage at 250 °C. In Ni–P(low), cracks were generated after 200 thermal cycles, whereas no cracks were observed even after 250 h of storage at 250 °C. In Ni–P(med) and Ni–P(high), both during thermal cycling and storage at 250 °C, cracks formed during or after crystallization of the amorphous layers. These results suggest that the primary factors affecting the generation of cracks in electroless Ni–P platings are crystallization of the Ni–P platings and repeated changes in thermal stress.     

Cooperative enhancement of deoxyribozyme activity by chemical modification and added cationic copolymer

Deoxyribozymes (DNAzymes) having RNA-cleaving activity have widely been explored as tools for therapeutic and diagnostic purposes. Both the chemical cleaving step and the turnover step should be improved for enhancing overall activity of DNAzymes. We have shown that cationic copolymer enhanced DNAzyme activity by increasing turnover efficacy. In this paper, effectｓ of the copolymer on DNAzymes modified with locked nucleic acids (LNA) or 2′-O-methylated (2′-OMe) nucleic acids were studied. The copolymer increased activity of these chemically modified DNAzymes. More than 30-fold enhancement in multiple-turnover catalytic activity was observed with 2′-OMe-modified DNAzyme in the presence of the copolymer. DNAzyme catalytic activity was successfully enhanced by cooperation of the added copolymer and chemical modification of DNAzyme.     

Effects of water chemistry and potential distribution on electrochemical corrosion potential measurements in 553 K pure water

The effects of water chemistry distribution on the potential of a reference electrode and of the potential distribution on the measured potential should be known qualitatively to obtain accurate electrochemical corrosion potential (ECP) data in BWRs. First, the effects of oxygen on a platinum reference electrode were studied in 553 K pure water containing dissolved hydrogen (DH) concentration of 26–105 μg kg^?1 (ppb). The platinum electrode worked in the same way as the theoretical hydrogen electrode under the condition that the molar ratio of DH to dissolved oxygen (DO) was more than 10 and that DO was less than 100 ppb. Second, the effects of potential distribution on the measured potential were studied by using the ECP measurement part without platinum deposition on the surfaces connected to another ECP measurement part with platinum deposition on the surfaces in 553 K pure water containing 100–130 ppb of DH or 100–130 ppb of DH plus 400 ppb of hydrogen peroxide. Measured potentials for each ECP measurement part were in good agreement with literature data for each surface condition. The lead wire connecting point did not affect the measured potential. Potential should be measured at the nearest point from the reference electrode in which case it will be not affected by either the potential distribution or the connection point of the lead wire in pure water.     

Computer-aided prognosis of neuroblastoma on whole-slide images: Classification of stromal development

We are developing a computer-aided prognosis system for neuroblastoma (NB), a cancer of the nervous system and one of the most malignant tumors affecting children. Histopathological examination is an important stage for further treatment planning in routine clinical diagnosis of NB. According to the International Neuroblastoma Pathology Classification (the Shimada system), NB patients are classified into favorable and unfavorable histology based on the tissue morphology. In this study, we propose an image analysis system that operates on digitized H&E stained whole-slide NB tissue samples and classifies each slide as either stroma-rich or stroma-poor based on the degree of Schwannian stromal development. Our statistical framework performs the classification based on texture features extracted using co-occurrence statistics and local binary patterns. Due to the high resolution of digitized whole-slide images, we propose a multi-resolution approach that mimics the evaluation of a pathologist such that the image analysis starts from the lowest resolution and switches to higher resolutions when necessary. We employ an offline feature selection step, which determines the most discriminative features at each resolution level during the training step. A modified k-nearest neighbor classifier is used to determine the confidence level of the classification to make the decision at a particular resolution level. The proposed approach was independently tested on 43 whole-slide samples and provided an overall classification accuracy of 88.4%.