Structure Analysis of Molten Ba–Ge Alloys Using Electrostatic Levitation Technique Combined With High-Energy X-Ray Diffraction

High-energy synchrotron X-ray diffraction experiments were performed for clathrate-forming barium–germanium (Ba–Ge) alloys in the liquid state near the eutectic composition. The accurate structure information of highly reactive melts has been obtained by applying electrostatic levitation technique as a containerless method. The structure information obtained from the reverse Monte Carlo simulation suggests that the short-range ordering between the Ge atoms occurs with the addition of Ba atoms in the liquid Ba–Ge alloys. This can be associated with the formation of the cage-like structure composed of the Ge atoms in the liquid alloys near the eutectic composition.     

Hydrogen behavior in gasochromic tungsten oxide films investigated by elastic recoil detection analysis

Changes in the composition and crystalline structure of gasochromic tungsten oxide films resulting from the incorporation of hydrogen were investigated; the oxide films were prepared by reactive RF magnetron sputtering on SiO₂ and glassy carbon substrates simultaneously. X-ray diffraction analysis of the deposited films at 600 °C showed a uniaxial oriented structure in the (0 1 0) plane of monoclinic WO₃ for both substrates. The elastic recoil detection analysis (ERDA) and Rutherford backscattering spectroscopy (RBS) for the films on glassy carbon revealed that the hydrogen impurity was uniformly distributed up to a concentration of 0.24 H/W. The Pd-coated films on SiO₂ turned blue when they were exposed to a mixture of Ar and 5% H₂ gases. When the sample became colored, the hydrogen concentration in the film increased to 0.47 H/W and the crystalline structure of the film changed from monoclinic to tetragonal. These results indicated that the gasochromic coloration of the tungsten oxide films coincided with incorporation of hydrogen atoms into the crystalline lattice, corresponding to the formation of hydrogen tungsten bronze (H_xWO₃).     

Solution Property and Irradiation Effect of Random Copolypeptides Composed of Ala and Pro Residues

Summary Poly(proline) and random copolypeptide composed of Pro and Ala residues were synthesized, and their solution properties and molecular conformation were investigated. Aqueous solutions of the polypeptide were irradiated with γ-rays above the transition temperature. It was shown that the transition temperature of the aqueous solution of the copolypeptide is influenced by Ala-residue content and γ-ray irradiation.     

Production of hyaluronic‐acid‐based cell‐enclosing microparticles and microcapsules via enzymatic reaction using a microfluidic system

This article describes the preparation of cell‐enclosing hyaluronic acid (HA) microparticles with solid core and microcapsules with liquid core through cell‐friendly horseradish peroxidase (HRP)‐catalyzed hydrogelation. The spherical vehicles were made from HA derivative possessing phenolic hydroxyl moieties (HA‐Ph) cross‐linkable through the enzymatic reaction by extruding cell‐suspending HA‐Ph aqueous solution containing HRP from a needle of 180 μm in inner diameter into the ambient coaxial flow of liquid paraffin containing H₂O₂ in a microtubule of 600 μm in diameter. By altering the flow rate of liquid paraffin, the diameters of gelatin and HA‐Ph microparticles were varied in the range of 120–220 μm and 100–300 μm, respectively. The viability of the enclosed human hepatoma HepG2 cells in the HA‐Ph microparticles of 180 μm in diameter was 94.2 ± 2.3%. The growth of the enclosed HepG2 cells was enhanced by decreasing the HRP concentration. The microcapsules of 200 μm in diameter were obtained by extruding HA‐Ph aqueous solution containing thermally liquefiable cell‐enclosing gelatin microparticles of 150 μm in diameter using the same microfluidic system. The enclosed cells grew and filled the cavity within 10 days. Spherical tissues covered with a heterogeneous cell layer were obtained by degrading the microcapsule membrane using hyaluronidase after covering the surface with a heterogeneous cell layer. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43107.     

Thermodynamics of iron oxide in Fe x O-dilute CaO + Al2O3 + MgO + Fe x O slags at 1873 K

In order to determine the ferrous and ferric ion capacities: 3

Learning shared embedding representation of motion and text using contrastive learning

Artificial Life and Robotics - Multimodal learning of motion and text tries to find the correspondence between skeletal time-series data acquired by motion capture and the text that describes the...     

Development of µGC (micro gas chromatography) with high performance micromachined chip column

A micro gas chromatography (µGC) instrument applying a high performance chip column fabricated on a silicon wafer was developed. Experimental results of the chip column and protyping of a µGC instrument are described. Approximately 35 000 theoretical plates were generated with the chip column coated liquid phase (5% phenyl-/95% dimethyl-polysiloxane). The theoretical plates of the chip column were close to those of the capillary column. Experimental minimum height equivalent to a theoretical plate (HETP, H_min) of the chip column was 1.2 times higher than the calculated H_min. A prototype µGC applying the chip column was developed. The µGC generated approximately 35 000 theoretical plates, similar to the theoretical plates obtained by a commercial GC instrument. Copyright © 2009 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Microfluidic device with chemical gradient for single-cell cytotoxicity assays

Here, we report the fabrication of a chemical gradient microfluidic device for single-cell cytotoxicity assays. This device consists of a microfluidic chemical gradient generator and a microcavity array that enables entrapment of cells with high efficiency at 88 ± 6% of the loaded cells. A 2-fold logarithmic chemical gradient generator that is capable of generating a serial 2-fold gradient was designed and then integrated with the microcavity array. High density single-cell entrapment was demonstrated in the device without cell damage, which was performed in 30 s. Finally, we validated the feasibility of this device to perform cytotoxicity assays by exposing cells to potassium cyanide (0-100 μM KCN). The device captured images of 4000 single cells affected by 6 concentrations of KCN and determined cell viability by counting the effected cells. Image scanning of the microcavity array was completed within 10 min using a 10× objective lens and a motorized stage. Aligning cells on the microcavity array eases cell counting, observation, imaging, and evaluation of singular cells. Thus, this platform was able to determine the cytotoxicity of chemicals at a single-cell level, as well as trace the cytotoxicity over time. This device and method will be useful for cytotoxicity analysis and basic biomedical research.     

Colorless polyimides with low coefficient of thermal expansion derived from alkyl‐substituted cyclobutanetetracarboxylic dianhydrides

Alkyl‐substituted cyclobutanetetracarboxylic dianhydrides (CBDAs) were synthesized by photo‐dimerization of alkyl‐substituted maleic anhydrides to obtain novel colorless polyimides (PIs). Dimethyl‐substituted CBDA (DM‐CBDA) showed much higher polymerizability with various diamines than conventional cycloaliphatic tetracarboxylic dianhydrides and led to high molecular weights of PI precursors. Polyaddition of non‐substituted CBDA and trans‐1,4‐cyclohexanediamine (t‐CHDA) was completely inhibited by salt formation in the initial reaction stage. The use of DM‐CBDA allowed the formation of a homogeneous/viscous PI precursor solution by overcoming the salt formation problem. The prominent substituent effect probably reflects how the methyl substituents of DM‐CBDA contributed to increasing the salt solubility. Some of the thermally imidized DM‐CBDA‐based systems simultaneously possessed non‐coloration, low coefficient of thermal expansion (CTE), very high T_g exceeding 300 °C and very low dielectric constant. Copolymerization was very effective for improving the solubility of DM‐CBDA‐based PIs. The copolyimide cast films prepared via chemical imidization displayed a further decreased CTE without sacrificing other target properties, suggesting that the present materials can be useful as plastic substrates in display devices. The mechanism of self‐chain orientation behavior during solution casting is also discussed. A potential application of the copolyimide systems as optical compensation film materials in liquid crystal displays is proposed. © 2013 Society of Chemical Industry .