Analysis of spatial smoothing effect of short‐term fluctuation of global solar radiation based on data including quantization error

Photovoltaic (PV) systems are attracting attention as one of the promising countermeasures against global warming and the environmental issues. However, the generation output from PV systems is generally unstable and unpredictable. Therefore, large penetration of PV systems may cause some serious impacts on power system operation, such as load frequency control, voltage regulation, etc. Estimation of the influences of PV system installation is becoming important, but it requires simultaneous multipoint solar radiation measurements. The Japan Meteorological Business Support Center has provided 1‐minute meteorological data observed in Japan, but its solar radiation data includes quantization errors. This paper proposes a regeneration method for solar radiation data including quantization errors. It also analyzes the spatial smoothing effect of global solar radiation fluctuations. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 180(3): 55–63, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21274     

Metal powder bed fusion in high gravity

Many studies have focused on the stabilization of additive manufacturing (AM) in microgravity for its use in various space projects. Nevertheless, this paper presents a vital clue for innovating metal AM technologies from the perspective of high gravity. High-gravitational powder bed fusion has an excellent potential to address various challenges in AM, such as density enhancement, spatter suppression, and precise fabrication. This study summarizes an analogy among phenomena in different gravitational fields and establishes a combined machine for centrifuge and powder bed fusion. The results confirm the spatter suppression and fine-powder availability in high gravity, both theoretically and experimentally.     

Light scattering of ideal random copolymers in bulk

Copolymerization is a useful way of modifying the physical properties of a material to meet specific needs, but it can result in a significant light scattering loss due to dielectric fluctuations in the material. Ideal random copolymers are known to be more transparent; however, the light-scattering properties of such copolymers in bulk have not been fully studied. In this paper, two representative ideal random copolymers were synthesized: methyl methacrylate (MMA)/benzyl methacrylate (BzMA) and MMA/2,2,2-trifluoroethyl methacrylate (TFEMA). The effects of copolymer composition and polymerization temperature on the light-scattering properties were investigated. Polarized light scattering (V_V) in copolymers was more sensitive to the polymerization temperature. Higher temperatures were necessary to homogenize the dielectric fluctuations and minimize excess light scattering. However, once the heterogeneous structures vanished, the copolymer bulk exhibited low scattering losses, which are comparable with homopolymers, over the entire range of copolymer compositions.     

Cationic polymerization of β-pinene with the AlCl3/SbCl3 binary catalyst: Comparison with α-pinene polymerization

The polymerization of β-pinene with the AlCl₃/SbCl₃ binary catalyst was investigated in toluene at −40°C and was compared with that of α-pinene. The polymerization of β-pinene with AlCl₃ alone was very rapid and retarded on addition of SbCl₃, in sharp contrast to that of α-pinene where added SbCl₃ remarkably accelerated it to give relatively high molecular weight oligomers. Attempted copolymerization of the two isomers with the binary catalyst, in turn, induced their parallel homopolymerizations, indicating that the copolymerization was difficult due to the large difference in reactivity. The homopolymerizations with AlCl₃/SbCl₃ were not seriously affected by a sterically hindered base, 2,6-di-tert-butyl-4-methylpyridine (DTBMP); the initiating species, therefore, would be different in nature from a proton. © 1996 John Wiley & Sons, Inc.     

A histochemical method using a substrate of beta-glucuronidase for detection of genetically modified papaya

A histochemical assay for detecting genetically modified (GM) papaya (derived from Line 55-1) is described. GM papaya, currently undergoing a safety assessment in Japan, was developed using a construct that included a beta-glucuronidase (GUS) reporter gene linked to a virus coat protein (CP) gene. Histochemical assay was used to visualize the blue GUS reaction product from transgenic seed embryos. Twelve embryos per fruit were extracted from the papaya seeds using a surgical knife. The embryos were incubated with the substrate 5-bromo-4-chloro-3-indolyl-beta-D-glucuronide (X-Gluc) in a 96-well microtiter plate for 10-15 hours at 37 degrees C. Seventy-five percent of GM papaya embryos should turn blue theoretically. The histochemical assay results were completely consistent with those from a qualitative polymerase chain reaction (PCR) method developed by this laboratory. Furthermore, the method was validated in a five-laboratory study. The method for detection of GM papaya is rapid and simple, and does not require use of specialized equipment.     

Perpendicular oriented cylinders via directional coalescence of spheres embedded in block copolymer films induced by solvent annealing

Polystyrene-b-poly(methyl acrylate) (PS-b-PMA) block copolymer with PS volume fraction of 25.2 vol% was synthesized by atom transfer radical polymerization. Non-pretreated silicon wafers were used as the substrates to prepare perpendicular oriented PS cylinders in PMA matrix via solvent annealing which could induce the transformation of spheres to vertically oriented and hexagonally packed cylinders. The spherical microdomains were formed after the evaporation of solvents from the solutions of the block copolymer in selective solvents mixed from methanol, acetone and dichloromethane. The thickness of films could be as thick as 1000 nm, which were much thicker than usual cases and the cylinders came from the directional coalescence of the spheres, thus any pre-treatments of the substrates were not required for perpendicular orientation. The structures were characterized by small angle X-ray scattering (SAXS), transmission electron microscope (TEM), atom force microscopy (AFM) and grazing incidence small angle X-ray scattering (GISAXS).     

Mouse Gastric Epithelial Cells Resist CagA Delivery by the Helicobacter pylori Type IV Secretion System

The initial step in bacterial infection is adherence of the bacterium to the target cell surface. Helicobacter pylori exploits the interaction of bacterial adhesin protein HopQ with human epithelial CEACAMs (CEACAM1, 5, and 6) to stably adhere to gastric epithelial cells, which is necessary for delivery of the H. pylori CagA oncoprotein into the epithelial cells via a type IV secretion system. In contrast to human CEACAMs, however, HopQ does not interact with Ceacam1 (mouse CEACAM1) in vitro or in CHO cells ectopically expressing Ceacam1. Since the mouse genome lacks Ceacam5 and Ceacam6, no significant HopQ–Ceacam interaction may occur in mouse gastric epithelial cells. Here, we found that the mouse stomach has a much lower expression level of Ceacam1 than the expression level of CEACAM1 in the human stomach. Consistently, mouse gastric epithelial cells resist CagA delivery by cagA-positive H. pylori, and the delivery is restored by ectopic expression of human CEACAM1 or CEACAM5 in mouse gastric epithelial cells. Thus, despite the fact that mice are routinely used for H. pylori infection studies, a low expression level of Ceacam1 in the mouse stomach together with the loss or greatly reduced interaction of HopQ with Ceacams make the mouse an inappropriate model for studying the role of H. pylori-delivered CagA in gastric pathogenesis, including the development of gastric cancer.     

Effect of chloride ions on leaching rate of chalcopyrite

The effect of chloride on chalcopyrite leaching has been investigated by performing batch leaching tests with three kinds of leaching solutions and using Hiroyoshi’s model, which suggests that a zone of rapid leaching exists between the critical potential (E_c, equilibrium redox potential for the reduction of CuFeS₂ to Cu₂S) and the oxidation potential (E_ox, equilibrium redox potential for the oxidation of Cu₂S). The results of the leaching tests show that the leaching rate in hydrochloric acid solution is the fastest and that the relationship between the Cu leaching rate and oxidation–reduction potential (ORP) follows Hiroyoshi’s model. Thermodynamic calculations indicate that, with an increase in the chloride concentration, the concentration of cuprous ions increases as the chlorocuprate(I) complex ions are formed and the contribution of cuprous ions to the critical potential is greater than that of cupric ions, even though the concentration of cuprous ions is lower than that of cupric ions. This fact suggests that the formation of chlorocuprate(I) ions in a chloride solution may improve the chalcopyrite leaching rate by increasing the critical potential.