A fast and compact elimination method of empty elements from a double‐array structure

A double‐array is a well‐known data structure to implement the trie. However, the space efficiency of the double‐array degrades with the number of key deletions because the double‐array keeps empty elements produced by the key deletion. This paper presents a fast and compact elimination method of empty elements using properties of the trie nodes that have no siblings. The present elimination method is implemented by C language. From simulation results for large sets of keys, the present elimination method is about 30–330 times faster than the conventional elimination method and maintains high space efficiency. Copyright © 2003 John Wiley & Sons, Ltd.     

Current dependence of performance of TES microcalorimeters and characteristics of excess noise

We are developing transition edge sensor (TES) microcalorimeter arrays for future Japanese astronomy missions. Although 6.6 eV energy resolution for 5.9 keV and 74 μs decay time are achieved, our energy resolution was limited by the excess noise of unknown origin. The dominant noise showed 1/R dependence and it only appeared when the current through the TES, I, is larger than 10 μA. This is explained if we assume a constant voltage noise source with a level of 2(4kT_CR_n)^1/2. We also investigated the influence of I on the TES performance and found the TES sensitivity is reduced when the ratio of current to the critical current I/I_C is large. It can explain the reduction of observed when operated without a magnetic shield. We also found a strong correlation between I_C and or the baseline width. Thus, we conclude that I_C is an essential parameter for the TES performance.     

Suppression of active-oxidation of Si-C fibers (Hi-Nicalon) under reduced pressure by carbon or silica coating

The suppression of the active-oxidation of Si-C fibers (Hi-Nicalon) by carbon or silica coating were investigated at 1773 K under a reduced pressure of 1.32 Pa, through mass change determination, XRD analysis, resistivity measurement, SEM observation and tensile test. The coating of carbon and silica were conducted by heat-treating at 1773 K in CO-CO₂ gas mixtures. After exposure under a reduced pressure, the carbon coating formed in pure CO gas remained almost perfect and the retained strength of 1.7 GPa was nearly identical to that in the as-heat treated state. On the other hand, the carbon coatings formed under other conditions and all the silica coatings were completely lost during vacuum exposure. The retained strengths were in the range of 0 to 1.6 GPa. The silica film was found to be ineffective for suppressing the active-oxidation during vacuum exposure.     

Layout and results from the initial operation of the high-resolution x-ray imaging crystal spectrometer on the Large Helical Device

First results of ion and electron temperature profile measurements from the x-ray imaging crystal spectrometer (XICS) diagnostic on the Large Helical Device (LHD) are presented. This diagnostic system has been operational since the beginning of the 2011 LHD experimental campaign and is the first application of the XICS diagnostic technique to helical plasma geometry. The XICS diagnostic provides measurements of ion and electron temperature profiles in LHD with a spatial resolution of 2 cm and a maximum time resolution of 5 ms (typically 20 ms). Ion temperature profiles from the XICS diagnostic are possible under conditions where charge exchange recombination spectroscopy (CXRS) is not possible (high density) or is perturbative to the plasma (low density or radio frequency heated plasmas). Measurements are made by using a spherically bent crystal to provide a spectrally resolved 1D image of the plasma from line integrated emission of helium-like Ar(16 +). The final hardware design and configuration are detailed along with the calibration procedures. Line-integrated ion and electron temperature measurements are presented, and the measurement accuracy is discussed. Finally central temperature measurements from the XICS system are compared to measurements from the Thomson scattering and CXRS systems, showing excellent agreement.     

Visualization of oscillating flow in a double-inlet pulse tube refrigerator with a diaphragm inserted in a bypass-tube

The double-inlet pulse tube refrigerator that has a diaphragm inserted in a bypass-tube, which enabled it to transmit a pressure oscillation whereas to obstruct a DC gas flow, was manufactured and tested. The oscillating flow behavior inside of the refrigerator was studied by using a smoke-wire flow visualization technique. It was found that if the diaphragm was optimized, the performance would be improved more than that of the refrigerator with a bypass valve due to the increase in the P–V work of the gas and the decrease in the convective heat loss caused by a secondary flow.     

Anthocyanins,but not Anthocyanidins,from Bilberry (Vaccinium myrtillus L.) Alleviate Pruritus via Inhibition of Mast Cell Degranulation

Abstract: We have previously reported that bilberry anthocyanins exhibit an anti‐pruritic effect in a mouse model of allergic contact dermatitis. It has been reported that anthocyanins are particularly sensitive to thermal treatment and are easily hydrolyzed to anthocyanidins when exposed to high temperatures. The objective of this study was to compare the anti‐pruritic effect of anthocyanin‐rich quality‐controlled bilberry extract and anthocyanidin‐rich degraded extract using a mouse model of allergic contact dermatitis. BALB/c mice with allergic contact dermatitis induced by 4 weeks of repeated application of 2,4,6‐trinitro‐1‐chlorobenzene (TNCB) were administered Bilberon‐25 orally for 4 weeks after sensitization with TNCB. The effect of Bilberon‐25 on pruritus was evaluated by measurement of scratching behavior. RBL‐2H3 mast cells were used to investigate the effect of Bilberon‐25 on degranulation in 48/80‐stimulated mast cells. Compared with nonheated Bilberon‐25, the proportion of anthocyanins in heated Bilberon‐25 decreased, and the proportion of anthocyanidins was increased in heated‐time dependent manner. Treatment with non‐heated Bilberon‐25 significantly attenuated the TNCB‐induced increase in scratching behavior, whereas treatment with 2 h‐heated Bilberon‐25 did not. Moreover, 300 μg/mL nonheated Bilberon‐25 showed significant inhibition of degranulation in RBL‐2H3 mast cells, whereas 2 h‐heated Bilberon‐25 had no effect at any concentration studied. It is assumed that the inhibitory effect of bilberry anthocyanins on pruritus might be mediated, at least in part, by its inhibitory effect on mast cell degranulation. In conclusion, the anthocyanin‐rich but not anthocyanidin‐rich bilberry extract may be a useful dietary supplement for skin diseases involving pruritic symptoms, such as chronic allergic contact dermatitis, atopic dermatitis, and rhinitis.     

Simultaneous Quantification of Secoisolariciresinol Diglucoside and Cyanogenic Glycosides in Flaxseed Products by Various Processing Methods

Two cyanogenic glycosides (linustatin and neolinustatin) and sucrose were isolated from defatted flaxseed, and their structures were determined by NMR spectral analysis and comparison with existing data. Using secoisolariciresinol diglucoside (SDG) and the cyanogenic glycosides as standards, we developed a method to quantify the three compounds simultaneously by ultrahigh-performance liquid chromatography (UHPLC)-MS in selected reaction monitoring (SRM) mode. Using this tool, flaxseed powder—processed by various methods—was analyzed with regard to the contents of the beneficial compound, SDG, and the toxic compounds, cyanogenic glycosides. The levels of SDG in samples treated with alkaline solution are much higher than in samples without treatment, and in general, the levels of linustatin and neolinustatin in flaxseed powder decreased progressively as heating time is prolonged after treatment with alkaline solutions.     

Detection of Buckminsterfullerene in Usual Soots and Commercial Charcoals

Abstract

It was confirmed that soot produced by free burning of small hydrocarbons like benzene and cyclohexane generally contains less than 0.1 ppm of C₆₀. Small, but measurable amounts of C₆₀ were found in two samples of charcoal, providing the first indication of fullerene formation in the solid state.     

Changes in Toyota Motors’ operations management

A key driver behind Toyota Motors’ rise to prominence has been the Toyota Production System (TPS). This pillar of the firm's competitive strength was developed over several decades. As of the late 1980s, various changes were introduced into the TPS. Some of these, such as line segmentation, the use of inter-segment buffers and high-tech automation, have been portrayed as breaks with TPS foundations. With virtually no exception published accounts on these changes stop with the situation in the mid-1990s. Based on general literature and three factory visits, this article aims to provide an update on the situation in April 2001.