Effect of Dehydration on Raspberries: Polyphenol and Anthocyanin Retention, Antioxidant Capacity, and Antiadipogenic Activity

ABSTRACT:  Fresh and dried raspberries prepared by freeze drying (FD), microwave-vacuum (MIVAC), hot-air drying (HAD), and a combination of hot-air drying and microwave-vacuum (HAD/MIVAC) drying methods were evaluated for polyphenol retention, total polyphenol and anthocyanin contents, total antioxidant capacity, and antiadipogenic activity (the inhibition of fat cell development). Ellagic acid and quercetin were present in the largest concentrations in fresh and dehydrated raspberries. Dehydration led to a loss of polyphenols and anthocyanins and antioxidant capacity. Polyphenols (aglycone form) were retained in the greatest amount: 20% (freeze dried) to 30% (HAD/MIVAC) (fresh = 100%). A total of 30% of polyphenols (glycoside form) were retained in raspberries dried by the HAD/MIVAC methods with 5% of retention observed for raspberries dried by FD, HAD, or MIVAC. FD and MIVAC resulted in higher retention of anthocyanins (aglycone form) than other drying methods. It was also observed that antioxidant activity was reduced by dehydration. Adipogenesis was inhibited by polyphenolic glycosides (30%) and aglycones (30% to 40%) in fresh and HAD/MIVAC raspberries. Extracts from dried raspberries by HAD/MIVAC methods were relatively more effective at inhibiting adipogenesis compared to HAD and FD dried raspberries.     

Successful treatment of severe cytomegalovirus retinitis with foscarnet and intraocular injection of ganciclovir in a myelosuppressed unrelated bone marrow transplant patient

PURPOSE: To compare U.S. medical student Match results in 1996 for 19 categorical residency positions by specialty with those of the overall Match reported by the National Resident Matching Program (NRMP). METHOD: Data for the numbers of "active" senior U.S. student applicants (those who submitted rank lists), the numbers of U.S. seniors matched, and the numbers of unfilled positions for 19 specialties were obtained from a variety of sources. Chi-square analysis was performed to compare Match results for each independent specialty with the overall Match results. The level for statistical significant was set at p < .005. RESULTS: Eight specialties were identified as significantly more competitive than the overall Match process for both the percentage of U.S. seniors who successfully matched in that specialty and the ratio of unmatched U.S. senior applicants to unfilled categorical positions. Five specialties were identified as significantly less competitive for these two measures. Six specialties showed no significant difference in the percentages of U.S. students matching, but for three of these specialties there were more unmatched students than unfilled categorical positions. CONCLUSION: U.S. medical student Match results for categorical residency positions for different specialties vary significantly from the overall Match process. This information can be used in counseling senior medical students on their specialty selection and the residency application process.     

Ubiquitous Memories: a memory externalization system using physical objects

In this paper we propose an object-triggered human memory augmentation system named “Ubiquitous Memories” that enables a user to directly associate his/her experience data with physical objects by using a “touching” operation. A user conceptually encloses his/her experiences gathered through sense organs into physical objects by simply touching an object. The user can also disclose and re-experience for himself/herself the experiences accumulated in an object by the same operation. We implemented a prototype system composed basically of a radio frequency identification (RFID) device. Physical objects are also attached to RFID tags. We conducted two experiments. The first experiment confirms a succession of the “encoding specificity principle,” which is well known in the research field of psychology, to the Ubiquitous Memories system. The second experiment aims at a clarification of the system’s characteristics by comparing the system with other memory externalization strategies. The results show the Ubiquitous Memories system is effective for supporting memorization and recollection of contextual events.     

Functional monomers and polymers, 64. Synthesis of poly-β-alanine from β-alanine, β-alanyl-β-alanine,and β-alanyl-β-alanyl-β-alanine 4-dodecanoyl-2-nitrophenyl esters

Active 4-dodecanoyl-2-nitrophenyl esters of β-alanine, β-alanyl-β-alanine, and β-alanyl-β-alanyl-β-alanine were prepared, and tried to polymerize in various solvents. Nonpolar solvents were found to be convenient for the polycondensation reaction. The yield of the polycondensation was high for the monopeptide ester, and less for the dipeptide and tripeptide esters. The effect of temperature on the polycondensation reaction was also studied.     

Leukemia developing after 131I treatment for thyroid cancer in a patient with Werner's syndrome: molecular and cytogenetic studies

A 40-year-old female patient with Werner's syndrome (WS) suffering from thyroid cancer and myelodysplastic syndrome (MDS) is reported. She had been diagnosed as having WS complicated with thyroid cancer seven years previously. Total thyroidectomy and radioactive iodine (131I, 100 mCi/year) therapy for seven years had slowed the progression of thyroid cancer. She suffered a sudden onset of MDS at the age of 40 years. After six months she died from overt leukemia. We found an additional chromosome aberration of chromosome 10 in the progression of leukemia from MDS.     

Selection of soldering temperature for ultrasonic-assisted soldering of 5056 aluminum alloy using Zn-Al system solders

The conditions for sound butt-joints of 5056 aluminum alloy containing 4.6 mass% Mg using Zn-xAl (x = 5, 13, and 38 mass%) solder at the relevant temperatures were investigated. Each solder foil was inserted between faying surfaces of 5056 aluminum rods. Ultrasonic vibration at a frequency of 19 kHz was applied to the faying surfaces through an aluminum substrate at soldering temperatures for 4 s in air. The strength of obtained solder joints was measured by tensile tests. The microstructure in the solder layer after the soldering process was evaluated with an SEM-EDX. The results of tensile tests revealed that joints soldered under the liquidus temperature of Zn-Al solders showed higher strength than joints soldered over the liquidus temperature. In the joints soldered over the solder liquidus temperature, the joint strength decreased with an increase in soldering temperature. It was caused by the formation of MgZn₂ in the solder layer due to dissolution of 5056-Al into the solder liquid during the soldering process. On the other hand, ultrasonic-assisted soldering under the solder liquidus temperature suppressed dissolution of 5056-Al and improved the joint strength by reducing the formation of MgZn₂.     

Noncontact measurement of deep tissue absorption coefficient using Spatially Resolved Near‐Infrared Spectroscopy

We examined the influence of probe‐tissue distance on the relationship between the deep tissue absorption coefficient and the spatial profile of light intensity by Monte Carlo simulation and in vivo experiments, using noncontact spatially resolved near‐infrared spectroscopy (SRS). These results suggest that noncontact SRS can be reliably used for noncontact measurement of the absorption coefficient and oxygen saturation of deep tissues. © 2007 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Integrity evaluation of glass-fiber composites with varied fiber/matrix interfacial strength using acoustic emission

An advanced acoustic emission analysis method was used to study the dynamics and sequence of microfractures in uni-directional glass-fiber reinforced plastics (UD-GFRPs). UD-GFRPs (60 wt% fiber) with different interfacial qualities were prepared by adding a small amount (4 or 8 wt%) of paraffin wax into vinylester matrix without affecting much the mechanical properties of the matrix. The orientation dependence of both the P-wave velocity and attenuation were accurately measured by the laser ultrasonic method, and incorporated into the acoustic emission analysis of visco-elastic media. The analysis iteratively compares the acoustic emission signals (measured as out-of-plane displacements) with theoretical waveforms calculated assuming the time history and type of an acoustic emission source. The waveform simulation allows us to estimate the fracture dynamics and the sequence of the Mode-I fiber fracture (Type 1), Mode-I debonding (Type 2) and Mode-II disbonding (Type 3). The fiber fracture in UD-GFRPs without wax started at 0.1% strain. The initiation strain increased to 0.25 and 0.3% in the specimens with wax. The specimens with lower interfacial strength showed rapid succession of microfractures at higher stresses (above 100–200 MPa). Fracture dynamics showed distinct differences by wax addition. Using the present analysis method, we can determine quantitatively effects of interfacial quality on the microfracture processes and assess the integrity of UD-GFRPs.     

Voltage holding study of 1 MeV accelerator for ITER neutral beam injector

Voltage holding test on MeV accelerator indicated that sustainable voltage was a half of that of ideal quasi-Rogowski electrode. It was suggested that the emission of the clumps is enhanced by a local electric field concentration, which leads to discharge initiation at lower voltage. To reduce the electric field concentration in the MeV accelerator, gaps between the grid supports were expanded and curvature radii at the support corners were increased. After the modifications, the accelerator succeeded in sustaining -1 MV in vacuum without beam acceleration. However, the beam energy was still limited at a level of 900 keV with a beam current density of 150 A∕m(2) (346 mA) where the 3 × 5 apertures were used. Measurement of the beam profile revealed that deflection of the H(-) ions was large and a part of the H(-) ions was intercepted at the acceleration grid. This causes high heat load on the grids and the breakdowns during beam acceleration. To suppress the direct interception, new grid system was designed with proper aperture displacement based on a 3D beam trajectory analysis. As the result, the beam deflection was compensated and the voltage holding during the beam acceleration was improved. Beam parameter of the MeV accelerator was increased to 980 keV, 185 A∕m(2) (427 mA), which is close to the requirement of ITER accelerator (1 MeV, 200 A∕m(2)).     

A study of multivariate (\bar{X},S)control chart based on Kullback–Leibler information

Recently, Chou et al. [11] have considered the multivariate control chart for monitoring the process mean vector and covariance matrix for the related quality characteristics simultaneously by using log-likelihood ratio statistics. They have computed the approximation formula described with Bernoulli polynomials of degrees r≥30 by using software MATHEMATICA 4.0 for obtaining the control limit with sufficient accuracy for the specified type I error probability in the chart. However, they cannot have obtained the approximation formula for the power evaluation. By the way, Kanagawa et al. [12] have proposed the $(\bar{x},s)$ control chart for monitoring the mean and variance simultaneously based on Kullback–Leibler information when quality characteristics obey a univariate normal distribution. In this article, by adopting the procedure by Kanagawa et al., we propose the other approximation formula for determining simply the control limit with sufficient accuracy for the specified type I error probability. Furthermore, the power evaluation for the chart is also considered in theory.