A rate adaptive bit-loading algorithm for in-building power-line communications based on DMT-modulated systems

This paper deals with a variable rate discrete multitone modulation system for broadband power-line communications, based on the bit-loading algorithm proposed by Leke and Cioffi. In the proposed system a suitable least mean square channel estimator is considered, which is based on the insertion of a training sequence (TS). The proposed approach will be compared with the ideal channel estimates, showing its effectiveness. Moreover, different TS lengths will be compared. The system performance, expressed in terms of bit rate and bit-error rate, is derived by simulation with and without estimation errors. The propagation environment has been assumed as a frequency-selective multipath fading channel with additive colored Gaussian noise, according to the in-building networks model.     

Kinetics of chlorination of tantalum pentoxide in mixture with sucrose carbon by chlorine gas

The mechanism and kinetics of β-Ta₂O₅ chlorination, mixed with sucrose carbon, have been studied by a thermogravimetric technique. The investigated temperature range was 500 °C to 850 °C. The reactants and reaction residues were analyzed by scanning electronic microscopy (SEM), X-ray diffraction (XRD), and Brunauer-Emmett-Teller method for surface area (BET). The effect of various experimental parameters was studied, such as carbon percentage, temperature, chlorine partial pressure, and flow, use of the multiple sample method, and carbon previous oxidation. The carbon percentage and previous treatment have an effect on the system reactivity. The temperature has a marked effect on the reaction rate. In the 500 °C to 600 °C temperature interval, the apparent activation energy is 144 kJ/mol of oxide, while at higher temperatures, the activation energy decreases. With high chorine partial pressures, the order of reaction is near zero. The kinetic contractile plate model, X=kt, considering carbon oxidation as the controlling stage, is the one with the best fit to the experimental data. A probable mechanism for the carbochlorination of β-Ta₂O₅ is proposed: (1) activation of chlorine on the carbon surface, (2) chlorination of Ta₂O₅, (3) oxidation of carbon, and (4) recrystallization of β-Ta₂O₅.     

A Low-Complexity Multiuser Detector for Asynchronous CDMA QPSK Adaptive Antenna Array Systems

This paper proposes a low complexity joint space-time multiuser detection algorithm for asynchronous DS/CDMA antenna array systems. The proposed multiuser detector is composed of an adaptive antenna array, used as a linear beamformer, and a sliding window decorrelator. A QPSK modulation scheme is used in order to increase bandwidth efficiency. Numerical results are given in terms of Bit Error Rate (BER) under the assumption of a frequency-selective Rayleigh slow fading channel. In particular, the proposed receiver is shown to be near-far resistant, even in worst fading cases, and to exploit completely array introduction while maintaining acceptable computational complexity. The proposed architecture avoids linear filter realization of the decorrelator, which is impractical in the case of a large number of users, and operates with relatively short data frames instead of the complete information sequence. Finally, this receiver is very flexible to changes in timing configuration.     

Characterisation of K, Na, and Li birnessites prepared by oxidation with H2O2 in a basic medium. Ion exchange properties and study of the calcined products

Birnessites containing Na, K or Li in the interlayer have been prepared by oxidation of Mn(II) cations with H₂O₂ in a basic medium with different alkaline cation/Mn molar ratios. The solids prepared have been characterised by elemental chemical analysis, powder X-ray diffraction, thermal analyses (differential thermal analysis and thermogravimetric analysis), FT-IR spectroscopy and surface texture assessment by adsorption of N₂ at –196°C. Crystalline birnessites are obtained for A/Mn ratios (A = K, Li) larger than 3.4, but MnO(OH) has been also identificed when such a ratio is smaller than 3.4. Ion exchange is topotactic, but is not complete for exchanging Na, K, or Mg for pre-existing Li. The solids are stable up to 400°C, and formation of spinels and solids with tunnel structures is observed at this temperature. Li-containing birnessites are transformed to LiMn₂O₄ spinel at 400°C, and co-crystallization of bixbyte (Mn₂O₃) is observed at higher temperatures. Bixbyte and cryptomelane are formed at 500°C for the K-containing birnessites.     

Physiological and theoretical analysis of K+ currents controlling discharge in neonatal rat mesencephalic trigeminal neurons

Whole cell voltage- and current-clamp recordings were obtained from mesencephalic trigeminal sensory (Mes 5) neurons identified visually in thin brain stem slices of neonatal rats with the use of infrared video microscopy. These cells exhibited accommodation in spike discharge responses to depolarizing current injection protocols whose duration differed as a function of holding potential (-50 vs. -65 mV). Several spikes were elicited before the membrane response accommodated from -50 mV, whereas from -65 mV only single action potentials were evoked. In response to similar protocols, application of the K+ channel blocker 4-aminopyridine (4-AP) (50 microM to 2 mM) caused sustained repetitive spiking whereas tetraethylammonium (TEA) (10-30 mM) did not cause repetitive spiking. In voltage clamp, 4-AP application (100 microM) revealed a sustained outward current (I4-AP) that was active between -60 and -30 mV. I4-AP was responsible for suppressing sustained repetitive spiking behavior, producing accommodation under normal circumstances. TEA application in voltage clamp revealed a sustained outward current evoked positive to -40 mV. Two transient outward currents (TOCs) were identified by prepulse protocols typically used to characterize A-type currents: a 4-AP-insensitive fast TOC, and a slow TOC (ITOC-S) sensitive to 4-AP (> 500 microM). A Ca(2+)-dependent outward current that activated positive to -30 mV was also characterized. A mathematical model of a Mes 5 neuron was assembled from our voltage-clamp records to simulate the dynamic interaction of outward currents during membrane excitation. We conclude that in Mes 5 neurons, the 4-AP-sensitive currents ITOC-S and I4-AP determine the duration of spike trains. In particular, the noninactivating I4-AP determines whether cells exhibit sustained repetitive discharge or accommodate in response to depolarizing current. Neurotransmitter modulation of this current or modulation of the resting membrane potential could modify the output properties of Mes 5 neurons, and therefore the properties of these currents must be incorporated into our current understanding of how these cells contribute to shaping oral-motor pattern generation.     

Ionomer composites based on sepiolite/hydrogenated poly(styrene butadiene) block copolymer systems

Ionomeric composites based on sepiolite and hydrogenated poly(styrene butadiene) block copolymer were obtained and characterized from a microstructural and electrical point of view. Before blending, because of the high silanol group concentration in the sepiolite, the latter could be organophilized with suitable coupling agents. The resulting materials were easily processed into thin films or membranes 0.2–0.4 mm thick, their conductivity in some cases approaching 10^?1 S/cm. Their suitability for film formation and good electrical properties indicate potential applications as electrolytes in polymer fuel cells. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3512–3519, 2002     

Effects of temperature, ammonium and glucose concentrations on yeast growth in a model wine system

In enology, alcoholic fermentation is a complex process involving several mechanisms. Slow and incomplete alcoholic fermentation is a chronic problem for the wine industry and factors leading to sluggish and stuck fermentations have been extensively studied and reviewed. The most studied cause of sluggish and stuck fermentation is the nitrogen content limitation. Nevertheless, other factors, such as temperature of fermentation and sugar concentration can affect the growth of yeasts. In this study we modelled the yeast growth‐cycle in wine model system as a function of temperature, sugar and ammonium concentrations; the individual effects and the interaction of these factors were analysed by means of a quadratic response surface methodology. Cell concentrations and weight loss were monitored in the whole wine fermentation process. The results of central composite design show that lower is the availability of nitrogen, higher is the cell growth rate; moreover, initial nitrogen concentration also influences survival time of Saccharomyces cerevisiae.     

Bioprocess applications of model-based estimation techniques

The last decade has seen the development of a number of approaches for estimating those variables which are difficult to measure on-line in industrial process situations. Whilst a range of techniques is available, a common element is the use of process knowledge in the form of a system model. In the case of bioprocess systems, although a large range of models has been presented in the literature, their use in estimation schemes on an industrial scale has been limited. A number of reasons can be identified for their low level of utilisation. Of particular significance is the uncertainty which exists in quantifying system performance and the process-model mismatch which inevitably results. The level of ‘pre-defined model’ uncertainty, together with the knowledge gained during the course of the fermentation, serves to dictate estimator structure. The paper considers a range of estimation strategies and contrasts, through industrial applications, their performance characteristics and utility.     

Kinetic study of the reaction between molybdenum trioxide and gaseous carbon tetrachloride

The kinetics of the chlorination reaction of molybdenum trioxide with gaseous carbon tetrachloride has been studied at temperatures between 713 and 753 K. The effects of temperature, reaction time, residence time and gaseous reactant concentration on conversion were studied throughout the reaction. In all cases, there was an increase in conversion when the above operating variables were increased. The kinetic model proposed is consistent with and correlates the experimental data. In the range studied for the different variables, the step that controls the rate of reaction is the surface chemical reaction. Values of the rate constant and the activation energy were estimated.