1923 Gleno Dam Break: Case Study and Numerical Modeling

On the morning of December 1, 1923, the Gleno Dam (located in the Central Italian Alps) suddenly collapsed a few days after the first complete reservoir filling. Nearly 4.5×106??m3 of water was released. The consequent inundation caused significant destruction along the downstream valley and a death toll of at least 356 lives. This failure is the only historical case of dam break caused by structural deficiencies that has occurred in Italy. As a result, it has deeply influenced the evolution of Italian regulations regarding dam design and hydraulic risk evaluation. However, in spite of its relevance, this event has never been characterized from a hydraulic standpoint. This paper reports the main information obtained from the analysis of a vast amount of historical documents regarding the Gleno Dam break to set up a case study useful for validating dam-break models in mountain settings. Moreover, it presents the main results of one-dimensional (1D) modeling of the dam break wave propagation accomplished with a first-order finite volume numerical scheme recently proposed in the literature for field applications. The overall effectiveness and reliability of the model are evaluated for this case characterized by very irregular topography. Finally, the practical relevance of several choices that the numerical reconstruction of this kind of event demands is tested.     

An Integrated CAD Methodology for Yield Enhancement of VLSI CMOS Circuits Including Statistical Device Variations

In this paper a novel CAD methodology for yield enhancement of VLSI CMOS circuits including random device variations is presented. The methodology is based on a preliminary characterization of the technological process by means of specific test chips for accurate mismatch modeling. To this purpose, a very accurate position-dependent parameter mismatch model has been formulated and extracted. Finally a CAD tool implementing this model has been developed. The tool is fully integrated in an environment of existing commercial tools and it has been experimented in the STMicroelectronics Flash Memory CAD Group.As an example of application, a bandgap reference circuit has been considered and the results obtained from simulations have been compared with experimental data. Furthermore, the methodology has been applied to the read path of a complex Flash Memory produced by STMicroelectronics, consisting of about 16,000 MOSFETs. Measurements of electrical performances have confirmed the validity of the methodology, and the accuracy of both the mismatch model and the simulation flow.     

Vehicle detection by means of stereo vision-based obstacles features extraction and monocular pattern analysis.

This paper presents a stereo vision system for the detection and distance computation of a preceding vehicle. It is divided in two major steps. Initially, a stereo vision-based algorithm is used to extract relevant three-dimensional (3-D) features in the scene, these features are investigated further in order to select the ones that belong to vertical objects only and not to the road or background. These 3-D vertical features are then used as a starting point for preceding vehicle detection; by using a symmetry operator, a match against a simplified model of a rear vehicle's shape is performed using a monocular vision-based approach that allows the identification of a preceding vehicle. In addition, using the 3-D information previously extracted, an accurate distance computation is performed.     

A Mixed Signal Fuzzy Controller Using Current Mode Circuits

A mixed analog-digital fuzzy logic inference processor chip, designed in a 0.35-μm CMOS technology, is presented. The analog fuzzy engine is based on a novel current-mode CMOS circuit used for the implementation of fuzzy partition membership functions. The architecture consists of a 3 inputs—1 output analog fuzzy engine, internal digital registers to store the parameters of the fuzzy controller, and a digital subsystem that allows the programmability of the fuzzy controller via an I ² C interface. The architecture, circuits, and some Cadence Spectre simulations are presented.     

Correlating equations for free convection heat transfer from horizontal isothermal cylinders set in a vertical array

Steady laminar free convection from flat vertical arrays of equally-spaced, horizontal isothermal cylinders set in free air, is studied numerically. A specifically developed computer-code based on the SIMPLE-C algorithm is used for the solution of the mass, momentum and energy transfer governing equations. Simulations are performed for arrays of 2-6 circular cylinders, for center-to-center separation distances from 2 up to more than 50 cylinder-diameters, and for values of the Rayleigh number based on the cylinder-diameter in the range between 5 × 10² and 5 × 10⁵. It is found that the heat transfer rate at the bottom cylinder remains the same as a single cylinder. In contrast, the downstream cylinders may exhibit either enhanced or reduced Nusselt numbers depending on their location in the array and on the geometry of the array. Heat transfer dimensionless correlating equations are proposed both for any individual cylinder in the array and for the whole tube-array. New correlation-equations for the calculation of the heat transfer rate from a single cylinder to the surrounding air are also proposed and compared to those available in the open literature.     

Disaster-survivable cloud-network mapping

Cloud-computing services are provided to consumers through a network of servers and network equipment. Cloud-network (CN) providers virtualize resources [e.g., virtual machine (VM) and virtual network (VN)] for efficient and secure resource allocation. Disasters are one of the worst threats for CNs as they can cause massive disruptions and CN disconnection. A disaster may also induce post-disaster correlated, cascading failures which can disconnect more CNs. Survivable virtual-network embedding (SVNE) approaches have been studied to protect VNs against single physical-link/-node and dual physical-link failures in communication infrastructure, but massive disruptions due to a disaster and their consequences can make SVNE approaches insufficient to guarantee cloud-computing survivability. In this work, we study the problem of survivable CN mapping from disaster. We consider risk assessment, VM backup location, and post-disaster survivability to reduce the risk of failure and probability of CN disconnection and the penalty paid by operators due to loss of capacity. We formulate the proposed approach as an integer linear program and study two scenarios: a natural disaster, e.g., earthquake and a human-made disaster, e.g., weapons-of-mass-destruction attack. Our illustrative examples show that our approach reduces the risk of CN disconnection and penalty up to 90 % compared with a baseline CN mapping approach and increases the CN survivability up to 100 % in both scenarios.     

An Integrated CMOS Front-End for Optical Absolute Rotary Encoders

This paper presents a front-end circuit for optical rotary encoders. The light pulses modulated by the encoder disc are transduced into current signals, which are pre-processed and converted into digital waveforms related to the disc angular position information. The proposed front-end circuit is compensated against temperature drifts. Digitally programmable calibration is provided to account for spreads in impinging light pulse power. Measurement results on integrated prototypes are shown, demonstrating correct operation of the front-end with an optical input power from 0.5 W to 3 W up to a signal frequency of 500 kHz in a temperature range from 0 °C to 80 °C.     

Experimental Study of an Adding Interferometer at Millimeter Waves

In order to study an original detection architecture for future cosmology experiments based on wide band adding interferometry, we have tested a single baseline bench instrument based on commercial components. The instrument has been characterized in the laboratory with a wide band power detection setup. A method which allows us to reconstruct the complete transfer function of the interferometer has been developed and validated with measurements. This scheme is useful to propagate the spurious effects of each component till the output of the detector.