Boehmite nanopetals self assembled to form rosette-like nanostructures

Rosette-like boehmite nanostructures were prepared successfully via a simple hydrothermal process. The obtained material was characterized with X-ray powder diffractometry (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Using Scherrer formula, the average crystallite size of the obtained boehmite rosettes was measured to be about 8 nm. It was shown that boehmite nanopetals with average width of about 41 nm determined by TEM, were formed during the hydrothermal process and then self assembled due to weak hydrogen bonds to fabricate boehmite rosettes. The specific surface area of the obtained rosette-like nanostructures was calculated through BET N₂-adsorption technique to be about 143.08 m²/g.     

Marketing importance and marketing performance measurement of architecture firms in Singapore: an exploratory study

While marketing is a known element of successful practice, architects are yet to be convinced of its full potential. Little was known about the marketing practice in architectural firms in Singapore. Attempts were made to determine the realities of formalized marketing approaches and their importance to architectural firms in Singapore through a questionnaire survey (where 95 architectural firms participated) and follow-up interviews. A total of 34 usable responses were collected. This was investigated using the ‘Architecture Business Development Process’ as a framework, which found evidence to suggest that marketing has been recognized as an important component of architectural practice in Singapore. The results show that the adoption of the ‘marketing concept’ in the architecture profession is still in its formative stages. Architectural firms – and small and medium ones in particular – need to fully capitalize on this area of business knowledge in order to influence, command and understand the market for them to remain financially viable as a practice. Despite little attention being paid to measuring the performance of marketing outcomes, almost all the respondents and interviewees acknowledged its increasing importance. With greater corporate governance, these firms are beginning to realize the significance of marketing, and are evaluating their practices to ride the market for success. This move indicates a positive step in bridging the disparities between architecture practice and design.     

The nutrition transition and indicators of child malnutrition

This study examines how the nutrition transition, which involves a westernization of diets and increased consumption of calorie-dense, processed foods, affects child malnutrition in developing countries. It is often assumed that the nutrition transition affects child weight but not child growth, which could be one reason why child underweight decreases faster than child stunting. But these effects have hardly been analyzed empirically. Cross-country panel regressions show that the nutrition transition reduces child underweight, while no consistent effect on child overweight is found. Against common views, our results also suggest that the nutrition transition reduces child stunting. Further research is required to confirm these findings.     

Alkaline earth metal oxides on γ-Al2O3 supported Co catalyst and their application to mercaptan oxidation

γ-Al₂O₃-supported alkaline earth metal oxide samples with different MgO, CaO, SrO and BaO loadings have been prepared by impregnating γ-Al₂O₃ with alkaline earth metal nitrate solutions and then calcining at 773 K and 1,023 K. The resultant samples have been characterized by XRD, EDS coupled with SEM, CO₂-TPD and BET. After preparation of the γ-Al₂O₃-supported alkaline earth metal oxide samples and impregnation with the liquid catalyst LCPs30, supplied by Axens, the catalytic performance of these catalysts was evaluated in the mercaptan oxidation reaction. Results showed that magnesium base oxide is formed at 773 K and base oxides of calcium, barium and strontium are formed at 1,023 K. Catalysts with higher mole ratios have higher conversions and the basicity increases with increasing base oxide loading in the samples. Furthermore, the conversion of mercaptans increases with increasing atomic number of the alkaline earth metal, excluding MgO, which has the highest conversion compared to the other base oxides.     

Mechanical properties of carbon fiber/epoxy composites: Effects of number of plies,fiber contents,and angle‐ply layers

Multi‐axial multi‐ply fabric (MMF) composites are becoming increasingly popular as reinforcing materials in high‐performance composites due to their high mechanical properties. This work aimed to study the effects of three variable parameters including fiber contents, numbers of plies, and layer orientations on the mechanical properties of MMF composites. Unidirectional carbon fibers and a two‐part epoxy resin were employed to produce the composite laminates using the manual lay‐up process. It was found that the mechanical properties of composites made with 5‐ply were slightly greater than 3‐ply composites. However, there was no highly significant difference between them. Generally, the angle‐ply of the composites showed the greatest effect on the mechanical properties compared with number of plies and layer orientations. The significant improvements in mechanical properties of the composites were further supported using scanning electron microscopy (SEM). Morphologies of the tensile fracture surfaces of composites revealed that the presence of fiber pulled out results in the creation of voids between the fibers and matrix polymer. This causes the mechanical properties of the composites to be reduced. Finally, the enhancement of mechanical properties of composites clearly confirmed that angle‐ply layer (0°,?35°,0°,+35°,0°) had the most significant reinforcing effect among other parameters evaluated. POLYM. ENG. SCI., 54:2676–2682, 2014. © 2013 Society of Plastics Engineers     

Fischer–Tropsch Synthesis on Co/Al2O3 Catalyst: Effect of Pretreatment Procedure

The effect of pretreatment procedure on catalytic performance during Fischer–Tropsch synthesis (FTS) of unpromoted cobalt on alumina (15 %Co/Al₂O₃) catalyst was studied in a fixed-bed reactor. Pure carbon monoxide or a mixture of hydrogen and carbon monoxide were used as reducing agents prior to FTS. Pretreatments with pure CO result in low activity and high selectivity to methane and gaseous hydrocarbons in comparison to standard hydrogen reduction. The use of synthesis gas (H₂/CO = 2/1) as a reducing agent resulted in high initial activity and high selectivity to gaseous hydrocarbons. Pretreatment procedure that utilized synthesis gas after the CO reduction resulted in low activity but high selectivity to high molecular weight hydrocarbons. Catalyst performance is strongly affected by the presence of cobalt carbides, cobalt oxide and/or various types of carbon species on the surface as determined by X-ray diffraction and temperature-programmed hydrogenation and oxidation characterization techniques.     

超细晶Al5083合金和碳化硼增强Al5083基复合材料的室温和高温干滑动摩擦磨损行为

讨论机械球磨Al5083合金和Al5083?5wt.％B4C复合材料在室温和200°C下的摩擦行为和磨损机制.结果表明,由于常温下的氧化磨损,形成可保护试样表面的机械混合层.在室温和80 N载荷下,Al5083和Al5083?5wt.％B4C球磨样品有磨损迹象,但体积磨损量有限,磨损率分别为5.8×10?7和4.4×1...     

Gelation of Amylopectin without Long Range Order

Weak amylopectin gels have been formed directly following dissolution of waxy maize granules. Rheological characterisation of these gels has been carried out as a function of stress and frequency. The gels are visually clear and homogeneous, and environmental scanning electron microscopy shows no trace of the original granules remaining. It is postulated that the origin of the gel network lies in pairwise aggregation of outer chains of the amylopectin molecules, presumably via double helix formation. However, these pairs of chain segments do not aggregate to develop crystallinity.     

Performance of a household-level arsenic removal system during 4-month deployments in Bangladesh

A simple arsenic removal system was used in Bangladesh by six households for 4 months to treat well water containing 190-750 microg/L As as well as 0.4-20 mg/L Fe and 0.2-1.9 mg/L P. The system removes As from a 16-L batch of water in a bucket by filtration through a sand bed following the addition of about 1.5 g of ferric sulfate and 0.5 g of calcium hypochlorite. Arsenic concentrations in all but 1 of 72 samples of treated water were below the Bangladesh drinking water standard of 50 microg/L for As. Approximately half of the samples also met the World Health Organization (WHO) guideline of 10 microg/L. At the two wells that did not meet the WHO guideline, observations were confirmed by additional experiments in one case ([P] = 1.9 mg/L) but not in the other, suggesting that the latter household was probably not following the instructions. Observed residual As levels are consistent with predictions from a surface complexation model only if the site density is increased to 2 mol/mol of Fe. With the exception of Mn, the average concentrations of other inorganic constituents of health concern (Cr, Ni, Cu, Se, Mo, Cd, Sb, Ba, Hg, Pb, and U) in treated water were below their respective WHO guideline for drinking water.     

Differential regulation of the mcb and emr operons of Escherichia coli: role of mcb in multidrug resistance

The mcb operon (which is responsible for microcin B17 production) and the emr operon (which encodes a multidrug resistance pump) share a common negative regulator, EmrR. Nevertheless, compounds that induce the emr operon repress the mcb operon. The pump dedicated to microcin B17 extrusion can also protect the calls against sparfloxacin and other toxic compounds.