New low band gap alternating polyfluorene copolymer-based photovoltaic cells

New low band gap alternating polyfluorene copolymers were synthesized for use in plastic solar cells and their optical, electrochemical, and photovoltaic characteristics were determined. These polymers incorporated fluorene units alternating with groups including electron-withdrawing (A) and electron-donating (D) groups in donor–acceptor–donor (DAD) sequence to achieve the lowering of band gaps. The HOMO–LUMO values were estimated from electrochemical studies. By varying the donor and acceptor strength and position of the solubilizing substituents, similar HOMO values were obtained. These values were also found to correlate well with the open circuit voltage (V_OC) values determined from photovoltaic data of the polymers blended with the acceptor PCBM. Despite similar HOMO values, the absorption spectra of the polymers differ significantly. This prompted the preparation of photovoltaic devices consisting of blends of two polymers with complementary absorptions in combination with PCBM to harvest more photons in the polymer solar cells.     

Snowmobile fatalities aspects on preventive measures from a 25-year review

During October 1973 through May 1998, 157 snowmobile fatalities were autopsied in Northern Sweden, including 131 riders, 15 passengers, six occupants with unknown position and five victims pulled by a snowmobile. Most fatalities occurred during March and April (41%), on weekends/holidays (75%), between 18:00 and 02:00 h (59%), during darkness (63%), in clear weather (84%) and at leisure time (94%). The median age was 39 years and 92% were men. The most common causes of death were blunt trauma (53%) and drowning (38%). A total of 64% were inebriated by alcohol, with a mean blood alcohol concentration of 1.7 g/l. More inebriated victims were found during weekends/holidays than on weekdays (75 vs. 51%) and during nighttime than during daytime (92 vs. 52). Driving into water was the most common event (38%) followed by collisions with immobile objects (20%). Alcohol and speeding were the most common contributors to the crashes, while flotation snowmobile suit and helmet use were considered to be the most important injury prevention factors.     

Die Verteilung von Zink zwischen Ferrit und Austenit und die Thermodynamik des Zweistoffsystems Eisen—Zink

Verfahren zur Herstellung sehr reiner Eisen-Zink-Legierungen. Ermittlung der Sättigungsgehalte an Zink im Ferrit und Austenit mit Hilfe der Mikrosonde. Berechnungen zur Beschreibung der thermodynamischen Eigenschaften des zinklegierten paramagnetischen Ferrits und des zinklegierten Austenits unter Zuhilfenahme von thermodynamischen Werten aus dem Schrifttum. Berechnung des Gleichgewichts Austenit/Ferrit, Festlegung der γ-Schleife des Zustandsschaubildes und Vergleich mit den ermittelten Werten. Berechnung der Löslichkeit der Γ-Phase im α-Eisen mit Hilfe der bereits bekannten Thermodynamik der α-Phase. Berechnung einer metastabilen Mischungslücke und deren Spinodale im Ferrit.     

Definitions of terms for a thermodynamic data bank—Part 3

For communication with a thermodynamic data bank, it is important to use terms that have strict definitions. The definitions presented here were prepared for use with a solution data bank developed by SGTE (Scientific Group Thermodata Europe), but should prove useful to others working in this field. Part 1 was included in Vol. 2, No. 2, and Part 2 in Vol. 3, No. 3 of theBulletin.     

ANN modeling applied to NO x reduction with octane in a new microreactor

A silver/alumina catalyst was tested for its NO _x reduction activity during oxygen-rich conditions and during variation in the input parameters (nitric oxide, octane and oxygen). The experimental data using the microreactor was investigated by means of artificial neural networks (ANN).     

Effect of titanium–magnesium catalyst morphology on the properties of polypropylene upon propylene polymerization in a liquid monomer

The effect of the particle size of an IK-8-21 domestic titanium-magnesium catalyst on the properties of polypropylene (PP) produced during the polymerization of propylene in a liquid monomer is studied. Catalysts with particle sizes of 20 to 64 μm are shown to have high activity and identical sensitivity to hydrogen and allow PP to be obtained with a narrow distribution of particles over size, high isotacticity, and close values of crystallinity, melting temperature, and physicomechanical properties. A slight decrease in the activity and bulk density of PP powder is observed when the average size of catalyst particles is increased from 20 to 43 μm. A more notable reduction in the activity and bulk density of PP powder is observed for catalyst with particle sizes of 62 to 64 μm. IK-8-21 catalyst is not inferior to its foreign analogues with respect to the properties of the resulting PP.     

PEPT study of particle cycle and residence time distributions in a Wurster fluid bed

Particle cycle and residence time distributions are critical factors in determining the coating quality in the Wurster process. Positron emission particle tracking experiments are performed to determine the cycle and residence times of particles in different regions of a Wurster fluid bed. The results show that particles tend to recirculate in and sneak out below from the Wurster tube. The experiments also show that a larger batch size leads to a shorter cycle time and a narrower cycle time distribution (CTD). It is possible to avoid recirculations and obtain a shorter cycle time and a narrower CTD by selecting the operating conditions appropriately or via equipment design. Experiments using binary mixtures of particles with a diameter ratio of 1.5 show that large particles have a longer cycle time than small particles and that the cycle time is shorter for mixtures with approximately equal amounts of small and large particles. © 2014 American Institute of Chemical Engineers AIChE J, 61: 756–768, 2015     

Biosynthesis of Jasmonates from Linoleic Acid by the Fungus Fusarium oxysporum. Evidence for a Novel Allene Oxide Cyclase

Fusarium oxysporum f. sp. tulipae (FOT) secretes (+)-7-iso-jasmonoyl-(S)-isoleucine ((+)-JA-Ile) to the growth medium together with about 10 times less 9,10-dihydro-(+)-7-iso-JA-Ile. Plants and fungi form (+)-JA-Ile from 18:3n-3 via 12-oxophytodienoic acid (12-OPDA), which is formed sequentially by 13S-lipoxygenase, allene oxide synthase (AOS), and allene oxide cyclase (AOC). Plant AOC does not accept linoleic acid (18:2n-6)-derived allene oxides and dihydrojasmonates are not commonly found in plants. This raises the question whether 18:2n-6 serves as the precursor of 9,10-dihydro-JA-Ile in Fusarium, or whether the latter arises by a putative reductase activity operating on the n-3 double bond of (+)-JA-Ile or one of its precursors. Incubation of pentadeuterated (d₅) 18:3n-3 with mycelia led to the formation of d₅-(+)-JA-Ile whereas d₅-9,10-dihydro-JA-Ile was not detectable. In contrast, d₅-9,10-dihydro-(+)-JA-Ile was produced following incubation of [17,17,18,18,18-²H₅]linoleic acid (d₅-18:2n-6). Furthermore, 9(S),13(S)-12-oxophytoenoic acid, the 15,16-dihydro analog of 12-OPDA, was formed upon incubation of unlabeled or d₅-18:2n-6. Appearance of the α-ketol, 12-oxo-13-hydroxy-9-octadecenoic acid following incubation of unlabeled or [¹³C₁₈]-labeled 13(S)-hydroperoxy-9(Z),11(E)-octadecadienoic acid confirmed the involvement of AOS and the biosynthesis of the allene oxide 12,13(S)-epoxy-9,11-octadecadienoic acid. The lack of conversion of this allene oxide by AOC in higher plants necessitates the conclusion that the fungal AOC is distinct from the corresponding plant enzyme.     

Orange to green switching anthraquinone-based electrochromic material

An easily accessible anthraquinone-benzodithiophene-based high bandgap polymer (PTAq) was synthesized by Stille coupling reactions in remarkably high yield (96.5%). The highest occupied molecular orbital energy level of the polymer was estimated from the onset of oxidation in a cyclic voltammetry study to be −5.7 eV. PTAq showed an orange-to-green color switching with the application of a 1.0-V external potential to the polymer film, which was visible to the naked eye. The optical behavior change was also monitored using ultraviolet–visible absorption spectroscopy and revealed a respectable 75% transmittance change when the polymer film was subjected to a 1.0-V external potential. The high color contrast observed makes PTAq one of the most promising materials for electrochromic device applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47729.