Effect of low dosages of powdered activated carbon on membrane bioreactor performance

Previous research has demonstrated that powdered activated carbon (PAC), when applied at very low dosages and long SRTs, reduces membrane fouling in membrane bioreactors (MBRs). This effect was related to the formation of stronger sludge flocs, which are less sensitive to shear. In this contribution the long-term effect of PAC addition was studied by running two parallel MBRs on sewage. To one of these, PAC was dosed and a lower fouling tendency of the sludge was verified, with a 70% longer sustainable filtration time. Low PAC dosages showed additional advantages with regard to oxygen transfer and dewaterability, which may provide savings on operational costs.     

Highly conductive ZnO films with high near infrared transparency

We present an approach for deposition of highly conductive nominally undoped ZnO films that are suitable for the n‐type window of low band gap solar cells. We demonstrate that low‐voltage radio frequency (RF) biasing of growing ZnO films during their deposition by non‐reactive sputtering makes them as conductive as when doped by aluminium (ρ≤1·10⁻³Ω cm). The films prepared with additional RF biasing possess lower free‐carrier concentration and higher free‐carrier mobility than Al‐doped ZnO (AZO) films of the same resistivity, which results in a substantially higher transparency in the near infrared region (NIR). Furthermore, these films exhibit good ambient stability and lower high‐temperature stability than the AZO films of the same thickness. We also present the characteristics of Cu(InGa)Se₂, CuInSe₂ and Cu₂ZnSnSe₄‐based solar cells prepared with the transparent window bilayer formed of the isolating and conductive ZnO films and compare them to their counterparts with a standard ZnO/AZO bilayer. We show that the solar cells with nominally undoped ZnO as their transparent conductive oxide layer exhibit an improved quantum efficiency for λ > 900 nm, which leads to a higher short circuit current density J_SC. This aspect is specifically beneficial in preparation of the Cu₂ZnSnSe₄ solar cells with band gap down to 0.85 eV; our champion device reached a J_SC of nearly 39 mAcm⁻², an open circuit voltage of 378mV, and a power conversion efficiency of 8.4 %. Copyright © 2015 John Wiley & Sons, Ltd.     

Light‐Driven Delivery and Release of Materials Using Liquid Marbles

Remote control of the locomotion of small objects is a challenge in itself and may also allow for the stimuli control of entire systems. Here, it is described how encapsulated liquids, referred to as liquid marbles, can be moved on a water surface with a simple near‐infrared laser or sunlight. Using light rather than pH or temperature as an external stimulus allows for the control of the position, area, timing, direction, and velocity of delivery. This approach makes it possible to not only transport the materials encapsulated within the liquid marble but also to release them at a specific place and time, as controlled by external stimuli. Furthermore, it is shown that liquid marbles can work as light‐driven towing engines to push or pull objects. Being able to remotely transport and push/pull the small objects by light and control the release of active substances on demand should open up a wide field of conceivable applications.     

Magnetically Decorated Multiwalled Carbon Nanotubes as Dual MRI and SPECT Contrast Agents

Carbon nanotubes (CNTs) are one of the most promising nanomaterials to be used in biomedicine for drug/gene delivery as well as biomedical imaging. This study develops radio‐labeled, iron oxide‐decorated multiwalled CNTs (MWNTs) as dual magnetic resonance (MR) and single photon emission computed tomography (SPECT) contrast agents. Hybrids containing different amounts of iron oxide are synthesized by in situ generation. Physicochemical characterisations reveal the presence of superparamagnetic iron oxide nanoparticles (SPION) granted the magnetic properties of the hybrids. Further comprehensive examinations including high resolution transmission electron microscopy (HRTEM), fast Fourier transform simulations, X‐ray diffraction, and X‐ray photoelectron spectroscopy assure the conformation of prepared SPION as γ‐Fe₂O₃. High r₂ relaxivities are obtained in both phantom and in vivo MRI compared to the clinically approved SPION Endorem. The hybrids are successfully radio labeled with technetium‐99m through a functionalized bisphosphonate and enable SPECT/CT imaging and γ‐scintigraphy to quantitatively analyze the biodistribution in mice. No abnormality is found by histological examination and the presence of SPION and MWNT are identified by Perls stain and Neutral Red stain, respectively. TEM images of liver and spleen tissues show the co‐localization of SPION and MWNTs within the same intracellular vesicles, indicating the in vivo stability of the hybrids after intravenous injection. The results demonstrate the capability of the present SPION–MWNT hybrids as dual MRI and SPECT contrast agents for in vivo use.     

Electromechanical converters associated to wind turbines and their control

In this paper is presented a classification of converters liable to be associated to wind turbines. A detailed classification of electromechanical converters has been given. Different methods of control of these converters have been discussed; among which the maximum power point tracking method is of particular interest. It responds well to various criteria such as precision, stability, rapidity and auto-adaptability.     

Use of a bis(aminoalkyl)-calix[4]arene derivative as cross-linking agent to enhance functional and mechanical properties of a maleated polypropylene

An isotactic polypropylene grafted by 1 wt% of maleic anhydride (iPP-g-MAH) was chemically modified to provide it with new functional abilities and improved mechanical properties. The specific additive considered in this work is a derivative of bis(aminoalkyl)-calix[4]arene. Not only this molecule serves as a cross-linking agent, but it offers grafting sites for metallic ions that confer electrolytic conductivity to the initially insulating polyolefin. Materials were synthesized by reactive extrusion, and subsequently manufactured as plates by injection molding. The three-dimensional macromolecular architecture was optimized by adjusting the NH₂:MAH molar ratio in a range from 0.5:1 to 1:1. Fourier transform infrared spectroscopy revealed the amine/ anhydride chemical reactions, while gel content measurements were used to determine the degree of cross-linking. The crystalline microstructure of the different materials was characterized by two complementary methods: (a) overall crystallinity by differential scanning calorimetry; (b) lamellar thickness by thermal fractionation using the self-successive auto-nucleation procedure. Only a small decrease of the crystalline lamellae is observed. The mechanical properties were determined by a video-controlled tensile testing method and by Brillouin spectroscopy. A transition from brittle to ductile behavior was observed for increasing cross-links density. Scanning electron microscopy on fracture surfaces showed that ductile fracture was favored by the development of fibrils.     

FcRn as a Transporter for Nasal Delivery of Biologics: A Systematic Review

FcRn plays a major role in regulating immune homeostasis, but it is also able to transport biologics across cellular barriers. The question of whether FcRn could be an efficient transporter of biologics across the nasal epithelial barrier is of particular interest, as it would allow a less invasive strategy for the administration of biologics in comparison to subcutaneous, intramuscular or intravenous administrations, which are often used in clinical practice. A focused systematic review was conducted following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. It was registered on the international prospective register of systematic reviews PROSPERO, which helped in identifying articles that met the inclusion criteria. Clinical and preclinical studies involving FcRn and the nasal delivery of biologics were screened, and the risk of bias was assessed across studies using the Oral Health Assessment Tool (OHAT). Among the 12 studies finally included in this systematic review (out of the 758 studies screened), 11 demonstrated efficient transcytosis of biologics through the nasal epithelium. Only three studies evaluated the potential toxicity of biologics’ intranasal delivery, and they all showed that it was safe. This systematic review confirmed that FcRn is expressed in the nasal airway and the olfactory epithelium, and that FcRn may play a role in IgG and/or IgG-derived molecule-transcytosis across the airway epithelium. However, additional research is needed to better characterize the pharmacokinetic and pharmacodynamic properties of biologics after their intranasal delivery.     

Experimental investigation of the effect of channel length on performance and water accumulation in a PEMFC parallel flow field

Longer channels within serpentine flow fields are highly effective at removing liquid water slugs and have little water accumulation; however, the long flow path causes a large pressure drop across the cell. This results in both a significant concentration gradient between the inlet and outlet, and high pumping losses. Parallel flow fields have a shorter flow path and smaller pressure drop between the inlet and outlet. This low pressure drop and multiple routes for reactants in parallel channels allows for significant formation of liquid water slugs and water accumulation. To investigate these differences, a polymer electrolyte membrane fuel cell parallel flow field with the ability to modify the length of the channels was designed, fabricated, and tested. Polarization curves and the performance, water accumulation, and pressure drop were measured during 15 min of 0.5 A cm⁻² steady-state operation. An analysis of variance was performed to determine if the channel length had a significant effect on performance. It was found that the longer 25 cm channels had significantly higher and more stable performance than the shorter 5 cm channels with an 18% and an 87% higher maximum power density and maximum current density, respectively. Channel lengths which result in a pressure drop, across the flow field, slightly larger than that required to expel liquid water slugs were found to have minimal water accumulation and high performance, while requiring minimal parasitic pumping power.