分子动力学模拟聚乙烯在碳纳米管表面的扩散

通过采用分子动力学方法模拟不同链长的聚乙烯分子在单壁碳纳米管表面的扩散,探究了聚乙烯的动力学性质。研究表明随着链长的增加聚乙烯在碳纳米管表面的扩散系数减小,且二者间存在明显的标度关系。聚乙烯在碳纳米管表面扩散的扩散系数和聚乙烯吸附在碳纳米管表面的构象有关,有序结构的聚乙烯比无序结构的聚乙烯在碳纳米管表面扩散的快。此外,由于受到碳纳米管吸附作用的影响,聚乙烯分子在平行于管轴和垂直于管轴2个方向上的扩散系数不同,扩散表现各向异性。     

生物发酵过程中SSVIP-NNI软测量方法

生物发酵过程中关键生化变量难以直接检测,提出了一种利用基于敏感性与特异性的变量投影重要性(SSVIP)方法优化神经网络逆系统(NNI)的软测量方法。根据逆系统理论建立软测量模型,采用VIP变量优选方法,对软测量模型中的辅助变量进行优化。为了进一步提高VIP方法优选变量的性能,利用模型敏感性与特异性的概念,重新定义了VIP筛选阈值,确定最优的发酵过程软测量模型的变量。构造神经网络近似最优逆系统软测量模型,实现对发酵过程中关键过程变量的估计。通过Pensim仿真平台进行实验研究,结果表明经过辅助变量优选的神经网络逆系统软测量模型具有更高的估计精度和泛化能力。     

固体超强酸S_2O_8~(2-)/Fe_2O_3—CoO催化合成乙酸异戊酯

制备固体超强酸催化剂S2O82-/Fe2O3—CoO,并用于乙酸异戊酯合成反应。用该催化剂通过正交试验合成乙酸异戊酯的最佳条件为:醇酸物质的量比为1.5,催化剂用量为0.8 g(以0.2 mol乙酸为准),带水剂用量为10 mL,反应时间为2.5 h,其酯化率可达98%以上。     

Harnessing the Melting Peculiarities of Ultra‐High Molecular Weight Polyethylene Fibers for the Processing of Compacted Fiber Composites

Summary: Compacted fiber composites offer unique properties due to their lack of an extraneous matrix. The conditions of processing ultra‐high molecular weight polyethylene (UHMWPE) fibers were simulated in a heated pressure cell. In situ X‐ray diffraction measurements were used to follow the relevant transitions and the changes in the degree of crystallinity during melting and crystallization. The results strongly support the suggestion that the hexagonal crystal phase, in which the chain conformation is extremely mobile on the segmental level, constitutes the physical basis of compaction technologies for processing UHMWPE fibers into a single‐polymer composite. This report suggests that using a pseudo‐phase diagram outlining the occurrence of different phases during slow heating and the degree of crystallinity can provide valuable insight into the technological parameters relevant for optimal processing conditions.

Degree of crystallinity as a function of pressure and temperature in a region relevant to compaction processes.     

动态格点搜索的改进算法用于团簇结构快速优化

结合高效的动态格点搜索(DLS)算法与扰动操作(Perturbation Operation)提出一种新的改进方法(DLS-PO),用于确定团簇的最低能量结构。针对一个特定构型,DLS算法总能给出其对应搜索空间的最规则结构。然而,一次失败的DLS优化将消耗大量的运算资源。为此,采取原子移动和结构旋转的扰动操作成功地改变了构型,再结合后续的DLS操作,提高了优化效率。将该算法用于原子数高达309的Lennard-Jones团簇及100原子NP-B函数铝团簇的结构优化。优化结果显示相比于DLS算法,DLS-PO算法更为高效。     

Vitamin A microencapsulation within poly(methyl methacrylate)‐g‐polyethylenimine microspheres: Localized proton buffering effect on vitamin A stability

To stabilize vitamin A in a cosmetic/dermatological formulation, we present here a new encapsulation method based on polymer microspheres having a localized “proton‐buffering” capacity. Poly(methyl methacrylate)‐g‐polyethylenimine (PMMA‐g‐PEI) was prepared by direct condensation grafting of PEI onto poly(methyl methacrylate‐co‐methyl acrylic acid). The reaction was confirmed by FT‐IR analysis showing the amide vibration at 1,550 cm^?1. Elemental analysis indicated that the weight content of the grafted PEI was 1.6% (w/w). Vitamin A was encapsulated into PMMA‐g‐PEI microspheres by using an oil‐in‐water (O/W) single emulsion method. The presence of PEI moiety dramatically improved the chemical stability of vitamin A in microspheres. Vitamin A encapsulated within PMMA‐g‐PEI microspheres maintained 91% of its initial activity after 30‐day incubation at 40°C, while only maintaining 60% within plain PMMA microspheres. This study demonstrates that proton‐buffering within hydrophobic polymer matrix is a useful strategy for stabilizing “acid‐labile” active ingredients. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 517–522, 2004     

橡胶注射过程中压力变化的研究

对橡胶注射过程中的压力变化进行了理论与实验研究。充模流动模型的压力、能量控制方程分别为：选用高斯方法求解总体有限元方程。实验与计算分析对比证明．本文选用的数学模型和计算方法所得结果与实测结果基本吻合、该模型可用以代替大量的实验，对橡胶充模过程进行模拟，并用Ｇｒａｐｈｅｒ软件对数值结果进行处理，以图表直观地表达出各种因素对充模过程的影响。     

自适应布谷鸟搜索算法

为了使布谷鸟搜索算法(Cuckoo Search,CS)在保持强大的全局搜索能力的同时,尽可能地提高局部搜索能力,在深入分析CS算法机理的基础上,将CS算法中影响布谷鸟搜索路径步长的参数β和布谷鸟蛋被发现(淘汰)的概率p_a由固定值改为随搜索过程自适应变化的动态参数,将越界的鸟窝折返回边界内、在当前代最优鸟窝附近的区域随机建立1个新的鸟窝、而非折返回边界上重新建立鸟窝,以提高算法的局部搜索能力和收敛速度。改进后的CS算法称为自适应布谷鸟搜索算法(Adaptive Cuckoo Search,ACS)。通过8个标准测试函数分别测试了CS算法和ACS算法的性能,结果表明,无论是简单的单峰函数还是复杂的多峰函数,无论是小型的低维函数还是大型的高维函数,ACS算法的寻优性能均超过CS算法。     

Thermal decomposition behavior of γ‐irradiated poly(vinyl acetate)/poly(methyl methacrylate) miscible blends

Miscible polymer blends based on various ratios of poly(vinyl acetate) (PVAc) and poly(methyl methacrylate) (PMMA) were prepared in film form by the solution casting technique using benzene as a common solvent. The thermal decomposition behavior of these blends and their individual homopolymers before and after γ‐irradiation at various doses (50–250 kGy) was investigated. The thermogravimetric analysis technique was utilized to determine the temperatures at which the maximum value of the rate of reaction (T_max) occurs and the kinetic parameters of the thermal decomposition. The rate of reaction curves of the individual homopolymers or their blends before or after γ‐ irradiation displayed similar trends in which the T_max corresponding to all polymers was found to exist in the same position but with different values. These findings and the visual observations of the blend solutions and the transparency of the films gave support to the complete miscibility of these blends. Three transitions were observed along the reaction rate versus temperature curves; the first was around 100–200°C with no defined T_max, which may arise from the evaporation of the solvent. The second T_max was in the 340–380°C range, which depended on the polymer blend and the γ‐irradiation condition. A third transition was seen in the rate of reaction curves only for pure PVAc and its blends with PMMA with ratios up to 50%, regardless of γ‐ irradiation. We concluded that γ‐irradiation improved the thermal stability of PVAc/PMMA blends, even though the PMMA polymer was degradable by γ irradiation. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1773–1780, 2006     

Poly(trimethylene terephthalate) nanocomposite fibers comprising different organoclays: Thermomechanical properties and morphology

Poly(trimethylene terephthalate) (PTT) nano composites were synthesized by in situ polymerization at high temperature with two thermally stable organoclays: 1,2‐dimethylhexadecylimidazolium‐montmorillonite (IMD‐MMT) and dodecyltriphenyl phosphonium‐MMT (C₁₂PPh‐MMT). PTT hybrid fibers with various organoclay contents were melt‐spun at various draw ratios (DRs) to produce monofilaments. The thermomechanical properties and morphologies of the PTT hybrid fibers were characterized using differential scanning calorimetry, thermogravimetric analysis, wide‐angle X‐ray diffraction, electron microscopy, and mechanical tensile properties analysis. The nanostructure of the hybrid fibers was observed by both scanning and transmission electron microscopy, which showed that the clay layers were well dispersed into the matrix polymer, although some clusters or agglomerated particles were also detected. Unlike the hybrids containing IMD‐MMT, the clay layers of the C₁₂PPh‐MMT hybrid fiber were more dispersed into the matrix polymer. The thermal stability and tensile properties of the hybrid fibers increased with increasing clay content for DR = 1. However, as DR increased from 1 to 9 the ultimate strength and initial modulus of the hybrid fibers with IMD‐MMT increased slightly whereas those of C₁₂PPh‐MMT hybrid fibers decreased slightly. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4535–4545, 2006