The physical solubilities and diffusivities of N<Subscript>2</Subscript>O and CO<Subscript>2</Subscript> in aqueous ammonia solutions on the additions of AMP,glycerol and ethylene glycol

Carbon dioxide (CO₂) is a major greenhouse gas, the emissions of which should be reduced. There are various technologies for the effective separation of CO₂. Of these, chemical absorption methods are generally accepted as the most effective. The monoethanolamine (MEA) process is an effective way to remove CO₂, but is an expensive option for the separation of CO₂ from massive gas-discharging plants. Therefore, ammonia solution, which is less expensive and more effective than MEA, was used for the removal of CO₂. In this study, the physical solubility of N₂O in (ammonia+water), (ammonia+2-amino-2-methyl-1-propanol+water), (ammonia+glycerol+water) and (ammonia+ ethylene glycol+water) was measured at 293, 303, 313, 323 K. Additive concentrations of 1, 3, and 5 wt% AMP, glycerol and ethylene glycol were added for each 9 wt% ammonia solution. A solubility apparatus was used to investigate the solubility of N₂O in ammonia solutions. The diffusivity was measured with a wetted wall column absorber. The “N₂O analogy” is used to estimate the solubility and diffusivity of CO₂ in the aqueous ammonia solutions. OriginPro 7.5 was used to correlate the solubility and diffusivity of N₂O in ammonia solutions. The parameters of the correlation were determined from the measured solubility and diffusivity.     

Electrochemical characteristics of porous TiO2 encapsulated silicon anode

TiO₂ coated silicon, which was prepared by the modified sol–gel method, was employed as the anode material for lithium secondary batteries and the relationship between the diffusivity and electrochemical characteristics was investigated. The results showed that the physical properties of the samples, such as their diffusivity and pore size distribution, enhanced the cycling efficiency of the TiO₂ coated silicon, probably due to the reduction of the side reactions, which may be closely related to the pore size distribution of the TiO₂ coating layer. The pore size of the coating layer plays an important role in retarding the lithium ion diffusion. In the experimental range studied herein, higher capacity retention was exhibited for the TiO₂ coated silicon prepared at pH 10.7.     

Enhanced green upconversion luminescence properties of Er3+/Yb3+ co-doped strontium gadolinium silicate oxyapatite phosphor

Upconversion Sr₂(Gd_.98-xEr_.02Yb_x)₈Si₆O₂₆ (SGSO:2Er³⁺/xYb³⁺) phosphor materials were synthesized using a citrate sol-gel process. X-ray diffraction patterns confirmed their hexagonal structure. Field emission scanning electron microscopy images of SGSO:2Er³⁺/xYb³⁺ phosphors depicted submicron particles. The enhanced upconversion luminescence properties of SGSO:2Er³⁺/xYb³⁺ phosphors were analysed as a function of Yb³⁺ ion concentration and laser power. The energy transfer induced enhanced emission of the Er³⁺/ Yb³⁺ ions co-doped SGSO phosphors was ascribed to multi-phonon relaxation. The calculated chromaticity coordinates of the SGSO:2Er³⁺/xYb³⁺ phosphors showed emissions could be tuned by changing Yb³⁺ ion concentration. Optimized sample exhibited the chromaticity coordinate values near to the ultra-high definition television standard green emission coordinates.     

Numerical simulation of gas-assisted polymer-melt electrospinning: Parametric study of a multinozzle system for mass production

In this study, we developed a multiphysics model for simulation of a gas-assisted melt-electrospinning (GAME) process, focusing on jet formation and propagation behavior. By numerically calculating the stresses acting on the jet during a single-nozzle GAME process, the shear viscous stress was identified as the main factor with respect to jet stretch; thus, the relationship between shear viscous stress and jet thickness was investigated. The jet stretch ratio increased sharply when shear viscous stress reached the level at which jet sharpening occurred, leading to stable jet formation. We defined this stress as the critical shear viscous stress to determine stable spinnability. By imposing an electric field distribution calculated for a multi-nozzle array (number of nozzles, tip-to-tip distance, and applied voltage) on the boundary condition of the single-nozzle GAME simulation model, multinozzle GAME was simulated; this enabled proposal of a spinnability diagram for stable spinning.     

Pyrolysis and co-pyrolysis of Laminaria japonica and polypropylene over mesoporous Al-SBA-15 catalyst

The catalytic co-pyrolysis of a seaweed biomass, Laminaria japonica, and a typical polymer material, polypropylene, was studied for the first time. A mesoporous material Al-SBA-15 was used as a catalyst. Pyrolysis experiments were conducted using a fixed-bed reactor and pyrolysis gas chromatography/mass spectrometry (Py-GC/MS). BET surface area, N₂ adsorption-desorption isotherms, and NH₃ temperature programmed desorption were measured to examine the catalyst characteristics. When only L. japonica was pyrolyzed, catalytic reforming slightly increased the gas yield and decreased the oil yield. The H₂O content in bio-oil was increased by catalytic reforming from 42.03 to 50.32 wt% due to the dehydration reaction occurring on the acid sites inside the large pores of Al-SBA-15. Acids, oxygenates, mono-aromatics, poly aromatic hydrocarbons, and phenolics were the main components of the bio-oil obtained from the pyrolysis of L. japonica. Upon catalytic reforming over Al-SBA-15, the main oxygenate species 1,4-anhydro-d-galactitol and 1,5-anhydro-d-manitol were completely removed. When L. japonica was co-pyrolyzed with polypropylene, the H₂O content in bio-oil was decreased dramatically (8.93 wt% in the case of catalytic co-pyrolysis), contributing to the improvement of the oil quality. A huge increase in the content of gasoline-range and diesel-range hydrocarbons in bio-oil was the most remarkable change that resulted from the co-pyrolysis with polypropylene, suggesting its potential as a transport fuel. The content of mono-aromatics with high economic value was also increased significantly by catalytic co-pyrolysis.     

Phosphaannulation of Aryl‐ and Benzylphosphonic Acids with Unactivated Alkenes via Palladium‐Catalyzed C?H Activation/Oxidative Cyclization Reaction

An efficient phosphaannulation via palladium(II)‐catalyzed C H activation/oxidative cyclization by the 6‐endo mode is reported for the synthesis of 3‐substituted phosphaisocoumarins from the reaction of arylphosphonic acids with unactivated alkenes under aerobic conditions. Also, α,α‐disubstituted benzylphosphonic acids were phosphaannulated with unactivated alkenes, producing phosphaisochromanones having (Z)‐alkylidenyl groups via anti‐phosphoryloxypalladation by the 6‐exo mode.

     

Deterioration behavior analysis of dysprosium and thulium co-doped barium titanate ceramics for multilayer ceramic capacitors

An accelerated testing method for barium titanate (BaTiO₃) dielectrics was proposed to elucidate deterioration behavior of dielectric constant based on the life-temperature relation. The accelerated degradation test (ADT) which was designed using various temperature ranges below and above Curie temperature (T_c) was focused on the optimized composition of dysprosium (Dy) and thulium (Tm) co-doped BaTiO₃. The statistical analysis of the failure time data was performed to determine the optimum distribution as a goodness-of-fitness test. A scale parameter (η) and activation energy (E_α) were calculated in order to predict the life time of the co-doped BaTiO₃, and there was difference between the expected life times according to the acceleration temperature rating of the ADT. The difference of deterioration mechanism around T_c could be deduced from the change of lattice parameter and polarization behavior. The drastic decrease of tetragonality and ferroelectric property caused by the phase transition of the co-doped BaTiO₃ was verified in the temperature above T_c. Accordingly, the acceleration factor over T_c should be considered as reliability study of the BaTiO₃ dielectrics for multilayer ceramic capacitors (MLCCs).     

Photocatalytic activities of electrospun tin oxide doped titanium dioxide nanofibers

SnO₂ doped TiO₂ electropsun nanofiber photocatalysts were successfully prepared by means of electrospinning process. The surface morphology, structure and optical properties of the resultant products were characterized by field-emission electron microscopy (FE-SEM), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), X-ray photoelectron spectroscopy (XPS), UV–vis spectroscopy, photoluminescence (PL) and cathodoluminescence (CL) techniques. The utilized physiochemical analyses indicated that the introduced SnO₂ doped TiO₂ nanofibers have a smooth surface and uniform diameters along their lengths. The photocatalytic performance of the composite nanofibers was tested for degradation of methylene blue (MB) and methyl orange (MO) dye solution under ultraviolet (UV) irradiation. Under the UV irradiation, the photocatalytic reaction rate in case of utilizing SnO₂-doped TiO₂ nanofibers was rapidly increased than that of the pristine TiO₂ nanofibers. Overall, this study demonstrates cheap, stable and effective material for photocatalytic degradation at room temperature.     

Preparation of poly(vinyl alcohol)/poly(acrylic acid)/TiO2/carbon nanotube composite nanofibers and their photobleaching properties

The composite nanofibers of poly(vinyl alcohol) (PVA)/poly(acrylic acid) (PAAc)/titanium(IV) oxide (TiO₂) were prepared by electrospinning for a novel photocatalytic treatment of waste water. To improve the photoelectronic properties of PVA/PAAc/TiO₂ composite nanofibers, carbon nanotubes (CNTs) were used as an additive. The TiO₂ and CNTs were immobilized in the PVA/PAAc hydrogels as electrospun nanofibers for an easier recovery after the wastewater treatment. The improved efficiency of pollutant dye removal was observed at pH 10 due to the pH-sensitive swelling behavior of the PVA/PAAc/TiO₂/CNTs composite nanofibers. The photocatalytic activity of TiO₂ was improved noticeably by applying electric field to the CNTs-embedded composite nanofibers.