Effects of winding connections on characteristics of a five‐phase stepping motor

A method for calculating the single‐step response of five‐phase hybrid stepping motors is obtained. The effects of winding connecting methods—(1) star‐bipolar SB, (2) pentagon PD, and (3) new pentagon NP—on the single‐step response are investigated. By application of the above calculation method, the continuous rotating characteristics are studied. It is found that the maximum slewing pulse rate of NP is higher than that of SB and PD connections, and that the variation of the rotor speed at high speed with the SB and PD connections is larger than that with the NP connection. The effects of the current waveform on the oscillation characteristics and relations between the current waveform and the winding connections are investigated. © 2001 Scripta Technica, Electr Eng Jpn, 136(1): 47–56, 2001     

Temperature control for the expansion of artificial DNA motif

The DNA, which forms a double helical conformation by the highly selective base-pairing rule with the width of 2 nm, is one of the polymers utilized as a template for nanoparticle assembly. Then, holiday junction structure, where two different DNA double strands intersect and replace each complement strand, is an important artificial motif for forming two-dimensional mesh-like DNA morphology. In this study, the two-dimensional sheet with the mesh-like conformation is formed and the growth of the DNA morphology is controlled by changing the temperature in the formation process. The influence of the cooling procedure on the formation process of the two-dimensional DNA sheet is observed by atomic force microscope, and the formation of double strands in the process is traced by absorption spectra. The spectroscopic results demonstrate that the two-dimensional DNA sheet is strongly dependent on the correlation between the applied cooling process and the melting temperature of double helical conformation, and that the growth of the two-dimensional DNA sheet can be manipulated by the cooling procedure. Further, we will show the size control of the DNA sheet by mixing the designed DNA which inhibits the growth of the DNA sheet.     

MnGeP2 Thin Films Grown by Molecular Beam Epitaxy

Growth conditions for MnGeP₂ thin films have been investigated by using molecular beam epitaxy (MBE) method. Mn and Ge were evaporated by K-cells, and P₂ was supplied by decomposing tertialybutylphosphine (TBP). GaAs (001) and InP (001) single crystals were used as substrates. An X-ray diffraction peak, which can be assigned to (008) peak of MnGeP₂, was observed at nearly the same position as the (004) peak of GaAs. The lattice constant of the MnGeP₂ thin film was determined to be 1.13 nm assuming its crystal structure is a c-axis oriented chalcopyrite type structure. Secondary phases such as GeP, MnGe_x and MnP were observed for beam fluxes of Mn and Ge as high as 1×10^–8 Torr.     

Structural Investigation of 95(0.6Li2S0.4SiS2)5Li4SiO4 Oxysulfide Glass by Using X-ray Photoelectron Spectroscopy

S2 p and O1 s photoelectron spectra were obtained for the 95(0.6Li₂S0.4SiS₂)5Li₄SiO₄ oxysulfide glass prepared by twin-roller quenching. A four-peak deconvolution technique was used to separate the S2 p peak of the glass into the components of bridging and nonbridging sulfur atoms. As a result of the deconvolution of the S2 p peak, we found that ∼92% of the sulfur atoms were present as nonbridging atoms. The O1 s peak of the glass was separated into two components: bridging and nonbridging oxygen atoms. This separation of the O1 s peak indicated that ∼85% of the oxygen atoms were present as bridging oxygen atoms.     

Robust scene recognition using a GA and real-world raw-image

This paper presents a new concept of scene recognition by a genetic algorithm (GA), using the 2-D gray-scale image of a working space, termed here as raw-image, and a model shaping the 2-D top-surface of a target object. In fact here, the problem of object recognition in the raw-image is changed into an optimization problem of a model-based evaluation function. We make use in this research of a GA, as a search and optimization method. This GA employs a model-based fitness function as its objective function to perform the search of a target in the raw-image. In this research, three object models, namely a frame model, a surface model, and a surface-strips model are investigated in order to determine which one is the best for scene recognition in a noisy environment. Also, in order to appraise the recognition performance of each model, a comparative study is performed by analyzing the answers to the following criteria questions: sensitivity, reliability, and speed. The effectiveness of the method has been verified through experiments using real-world raw-images, and the method has shown its robustness of object recognition with the surface-strips model, in spite of the noises in the scene.     

Protective effects of galacturonic acid-rich vinegar brewed from Japanese pear in a dextran sodium sulfate-induced acute colitis model

The effects of pear vinegar (PV), which was specially brewed for enhanced galacturonic acid content, on the DSS-induced ulcerative colitis (UC) mouse model were evaluated. PV improved clinical symptoms, colon inflammation, and histological tissue injury in the DSS-induced acute UC mouse model. Moreover, PV suppressed inflammation due to acute UC by suppressing the myeloperoxidase (MPO)-mediated activation of inflammatory cells such as leukocytes and decreasing the serum concentration of IL-6. Our results demonstrated the protective action of PV in the DSS-induced acute UC mouse model. On the other hand, commercial apple vinegar did not show a protective effect in the DSS-induced acute UC mouse model. Our findings indicate that PV may act as a new functional food for inflammatory bowel disease patients.     

Temporal-Talbot-effect-based preprocessing for pattern-effect reduction in all-optical clock recovery using a semiconductor-optical-amplifier-based fiber ring laser

We propose and experimentally demonstrate the temporal-Talbot-effect (TTE)-based preprocessing for the pattern-effect reduction in the all-optical clock recovery using a semiconductor-optical-amplifier (SOA)-based fiber ring laser (SOA-FRL). The TTE-based preprocessing successfully reduced the pattern effects of the recovered clock pulses, so that the 10-GHz clear optical clock pulses were recovered from a 10-Gbit/s return-to-zero on–off keying (RZ-OOK) pseudo-random bit sequence (PRBS) optical signal. “Peak variation” and “Pattern-dependent intensity noise (PDIN)” were proposed and were utilized as parameters to quantitatively evaluate the pattern effects, from which recovered clock pulses suffer, in the temporal domain and the frequency domain, respectively. Peak variation was reduced from 77.2% to 36.2%, and PDIN was improved from ?103 dBc/Hz to ?110 dBc/Hz with the aid of the TTE-based preprocessing. Furthermore, we examined the tolerance of the proposed technique by intentionally deviating the input signal’s bit-rate by ±190 Mbit/s (±2% of the bit-rate) from the optimum condition for the TTE. As compared with the PDIN value for the pulse train obtained by the direct injection of the non-processed signal into the SOA-FRL, the PDIN of the recovered clock pulses using the preprocessed signal indicated improvements over the entire measurement range of ±190 Mbit/s, which corresponds to the wavelength-dispersion deviation of ±56 ps/nm (±4% of the wavelength-dispersion applied to the input signal) from the optimum value.     

Modeling of NBTI saturation effect and its impact on electric field dependence of the lifetime

Negative Bias Temperature Instability of pMOSFETs is investigated under various stress gate voltages and temperatures. It is shown that degradation tends to saturate and the dependence of lifetime on electric field (E_ox) is expressed as a power-law of E_ox. We propose new empirical and kinetic models. The E_ox dependence of the lifetime described by the power-law is derived from our empirical model describing the saturation of degradation. Moreover, our kinetic model explains the saturation behavior.     

Preparation of cured epoxy resin particles having one hollow by polyaddition reaction

In 1996, the authors proposed a novel method to prepare micron-sized, hollow cross-linked polymer particles. This method is based on the self-assembling of phase separated polymer at interface with water, which was named SaPSeP method, formed by suspension polymerization of divinyl monomer in toluene droplet dissolving previously polystyrene. The SaPSeP method was developed to be applicable to polyaddition reaction system of epoxy resin with diamine. The presence of PS dissolving in epoxy/diamine/toluene droplets promotes the phase separation of the epoxy resin reacted with the diamine. The epoxy resin molecules tend to adsorb at the interface of the droplets. These points were accord with the required conditions for the preparation of hollow particle by the SaPSeP method. Cured epoxy resin particles having one hollow were successfully prepared by the polyaddition reaction in the dispersed system of Epikote 806/630/604, of which equivalent ratio was 5/4/1.     

FLAC/PFC coupled numerical simulation of AE in large-scale underground excavations

Acoustic emission (AE) and microseismic (MS) events are indicators of rock fracturing or damage as the rock is brought to failure at high stress. By capturing the AE/MS events, underground excavation induced rock mass degradation or damage can be located and evaluated. A better understanding of the extent and shape of the excavation damaged zone (EDZ) or yield zone around caverns helps to arrive at safe and economic design and construction of the caverns. For this purpose, one needs to understand the AE mechanism associated with the excavation process.In the present study, a coupled numerical method is used to study AE at the Kannagawa underground powerhouse cavern in Japan. Two codes, Fast Lagrangian Analysis of Continua (FLAC), a finite difference code and Particle Flow Code (PFC), a distinct element code, are coupled. The motive to apply the FLAC/PFC coupled approach is to take advantage of each modeling scheme while at the same time minimizing the requirement for computational resources. The coupling is realized through an exchange of displacements, velocities, and forces in each cycling step. The rock mass surrounding an AE sensor is modeled using PFC and the remaining rock mass is modeled with FLAC to consider the geological complexity and the excavation sequence. In this manner, the AE activities at AE sensor locations of the Kannagawa cavern were simulated and found to be in good agreement with field monitoring results. This approach takes account of stress redistribution and provides stress and displacement patterns in the rock mass that are consistent with AE observations for excavation design. The observed AE activities in the rock mass can thus be utilized to assess the effectiveness of the rock support system and the overall stability of the cavern.