Engineering practice and economic analysis of ozone oxidation wet denitrification technology

SO₂ and NO emitted from coal-fired power plants have caused serious air pollution in China. In this study, a test system for NO oxidation using O₃ is established. The basic characteristics of NO oxidation and products forms are studied. A separate test system for the combined removal of SO₂ and NO_x is also established, and the absorption characteristics of NO_x are studied. The characteristics of NO oxidation and NO_x absorption were verified in a 35 t·h^-1 industrial boiler wet combined desulfurization and denitrification project. The operating economy of ozone oxidation wet denitrification technology is analyzed. The results show that O₃ has a high rate and strong selectivity for NO oxidation. When O₃ is insufficient, the primary oxidation product is NO₂. When O₃ is present in excess, NO₂ continues to get oxidized to N₂O₅ or NO₃. The removal efficiency of NO₂ in alkaline absorption system is low (only about 15%). NO_x removal efficiency can be improved by oxidizing NO_x to N₂O₅ or NO₃ by increasing ozone ratio. When the molar ratio of O₃/NO is 1.77, the NO_x removal efficiency reaches 90.3%, while the operating cost of removing NO_x per kilogram is 6.06 USD (NO₂).     

Apoptotic Effects of Anthocyanins from Vitis coignetiae Pulliat Are Enhanced by Augmented Enhancer of the Rudimentary Homolog (ERH) in Human Gastric Carcinoma MKN28 Cells

Evidence suggests that augmented expression of a certain gene can influence the efficacy of targeted and conventional chemotherapies. Here, we tested whether the high expression of enhancer of the rudimentary homolog (ERH), which serves as a prognostic factor in some cancers, can influence the efficacy of anthocyanins isolated from fruits of Vitis coignetiae Pulliat, Meoru in Korea (AIMs) on human gastric cancer cells. The anticancer efficacy of AIMs was augmented in ERH-transfected MKN28 cells (E-MKN28 cells). Molecularly, ERH augmented AIM-induced caspase-dependent apoptosis by activating caspase-3 and -9. The ERH-augmented apoptotic effect was related to mitochondrial depolarization and inhibition of antiapoptotic proteins, XIAP, and Bcl-2. In addition, reactive oxygen species (ROS) generation was augmented in AIMs-treated E-MKN28 cells compared to AIMs-treated naïve MKN28 cells. In conclusion, ERH augmented AIM-induced caspase-dependent mitochondrial-related apoptosis in MKN28 cells. A decrease in expression of Bcl-2 and subsequent excessive ROS generation would be the mechanism for ERH-augmented mitochondrial-related apoptosis in AIMs-treated MKN28 cells. A decrease in expression of XIAP would be another mechanism for ERH-augmented caspase-dependent apoptosis in AIMs-treated MKN28 cells.     

Spray Coating of 2- and 3-D Solid Substrates Using a Sulfated Polysaccharide for Marine Antifouling Applications

Marine antifouling coating using functional polymers has emerged as an important tool to combat marine fouling. Owing to their natural abundance, polysaccharides represent a more sustainable option than synthetic polymers and carrageenan, a sulfated polysaccharide, is identified as a promising candidate for further research based on its excellent marine antifouling properties. However, existing research has only explored the application of carrageenan-based coatings for 2D objects, using techniques such as spin-coating. Here, a spray-coating method is proposed to apply carrageenan-based coatings to the surfaces of 2- and 3-D objects. The coated surfaces exhibit high stability under various chemical/physical stresses and high resistance to protein adsorption and marine diatom adhesion.     

Low temperature OMVPE growth of ZnSe withTertiary-butyl allyl selenide and dimethylzinc-triethylamine

The growth of high quality ZnSe by organometallic vapor phase epitaxy (OMVPE) has been investigated fortertiary-butyl allyl selenide (tBASe), combined with dimethylzinc-triethylamine (DMZn : NEt₃). Single crystalline ZnSe films were grown on GaAs at temperature as low as 350°C with a reasonable growth rate (~1 µm/h). Secondary ion mass spectrometry (SIMS) spectra show a negligible carbon incorporation in ZnSe films from tBASe even at high VI/II ratio, in contrast the carbon concentration of 10²¹ cm^-3 in ZnSe films grown from diallyl selenide (DASe)and methylallylselenide (MASe). Good surface morphology, crystalline and interface quality of ZnSe on (001) GaAs are confirmed by scanning electron microscopy, double crystal diffractometry (DCD) and Rutherford backscattering spectrometry (RBS). Photoluminescence at 10K shows sharp near-band-edge excitonic spectra.     

Unsteady extinction mechanism of nonpremixed flame interacting with a vortex

The extinction mechanism of a CH₄/N₂-air counterflow nonpremixed flame interacting with a single vortex was numerically studied. An augmented reduced mechanism was used to treat the CH₄ oxidation reactions. The contribution of each term in the energy and the OH species equations were evaluated to investigate the unsteady extinction mechanism of nonpremixed flame. The flame temperature began to decrease due to the convection heat loss when the flame interacted with a vortex. The investigation of the radical behavior during the flame-vortex interaction process also provided useful information on the unsteady extinction mechanism. The OH radical concentration could be used as a good tracer of the state of the unsteady extinction of nonpremixed flame. The reduction mechanism of OH concentration was confirmed by analyzing the contribution of each term in the OH species equation. At initial stage of flame-vortex interaction, the OH production and consumption rates increased gradually, while the OH concentration was kept nearly constant. Near the extinction limit, the OH production rate decreased rapidly due to the low flame temperature, and the balance between the OH production and OH consumption by diffusion could not be maintained. The unsteady nonpremixed flame interacting with a vortex under the conditions of regime (V) shown in the spectral combustion diagram [Thévenin, D., Renard, P.H., Fiechtner, G.J., Gord, J.R., Rolon, J.C., 2000. Regimes of non-premixed flame-vortex interactions. Proceedings of the Combustion Institute 28, 2101-2108.] was finally extinguished due to low reactivity, which was induced by the low flame temperature.     

Analysis of the correlation between acoustic noise and vibration generated by a multi-layer ceramic capacitor

Acoustic noise generated by a multi-layer ceramic capacitor (MLCC) makes users uncomfortable, so the problem must be analyzed to reduce the noise. There is a correlation between the acoustic noise and the vibration of MLCCs and the circuit board. Therefore, the acoustic noise problem must be investigated from a vibration perspective. In this study, the acoustic noise-generating mechanism was investigated, and the relationship between the characteristics of the noise and the dynamic characteristics of the circuit board with MLCC was analyzed. And a correlation criterion was proposed to predict the acoustic noise using the vibration response of the circuit board.     

An experimental investigation of mixing of carbon nanotube/polymer composite in a batch-type screw mixer

We develop a miniaturized batch-type screw mixer (BSM) for uniform mixing of polymer resin and nanoparticles, based on the stretching of material elements. This stretching is induced by the combination of recirculating cross-sectional flows in deep channels of the screw and high shear stress developed at flight regions. The BSM is used to produce a polymer nano-composite composed of multi-walled carbon nanotubes and polydimethylsiloxane resin. The mixing performance of the BSM is characterized quantitatively by estimating two different types of mixing efficiencies (i.e., dispersive mixing and distributive mixing) via transmitted light microscope images. The developed BSM highly improves the mixing performance rather than that of a conventional ultrasonic mixing device.     

Water sorption of poly(vinyl alcohol)/ poly(diallyldimethylammonium chloride) interpenetrating polymer network hydrogels

Temperature‐responsive interpenetrating polymer network (IPN) hydrogels constructed with poly(vinyl alcohol) and poly(diallyldimethylammonium chloride) using the sequential IPN method were studied. The characteristics of IPN hydrogels were investigated using the dynamic vapor sorption system. IPN hydrogels exhibited a relatively high sorption ratio, 180–360% at room temperature. The sorption ratio of hydrogels depended on temperature. Diffusion coefficients were calculated according to the Fickian Law at several temperatures. The apparent activation energy was 5.43 kJ mol^?1, which corresponds to typical diffusion processes. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1389–1392, 2003