Evaluation of surfactant-aided degumming of vegetable oils by membrane technology

The first step in the process of vegetable oil refining is degumming, in which phospholipids and mucilaginous gums are removed that otherwise result in a low-grade oil. A membrane process is remarkably simple yet potentially offers many advantages in degumming. Studies were conducted on surfactant-aided membrane degumming with soybean and rapeseed oils in a magnetically stirred flat membrane batch cell with different types of microfiltration membranes. The reduction of phospholipids in soybean oil was in the range of 85.8–92.8% during the membrane process. The phosphorus content of membrane permeates of soybean oil was in the range of 20–58 mg/kg. Crude rapeseed oil contained higher amount of nonhydratable phospholipids and hence resulted in lower reduction in phospholipids, in the range of 66.4–83.2%. Addition of hydratable phospholipids could improve the efficiency of degumming in the membrane process without using any electrolyte, resulting in improvement of quality as well as quantity of the phospholipids.     

Effect of chitosan feeding on intestinal bile acid metabolism in rats

The effect of chitosan feeding (for 21 days) on intestinal bile acids was studied in male rats. Serum cholesterol levels in rats fed a commercial diet low in cholesterol were decreased by chitosan supplementation. Chitosan inhibited the transformation of cholesterol to coprostanol without causing a qualitative change in fecal excretion of these neutral sterols. Increased fiber consumption did not increase fecal excretion of bile acids, but caused a marked change in fecal bile acid composition. Litcholic acid increased sigificantly, deoxycholic acid increased to a leasser extent, whereas hyodeoxycholic acid and the 6β-isomer and 5-epimeric 3α-hydroxy-6-keto-cholanoic acid(s) decreased. The pH in the cecum and colon became elevated by chitosan feeding which affected the conversion of primary bile acids to secondary bile acids in the large intestine. In the cecum, chitosan feeding increased the concentration of α-,β-, and ω-muricholic acids, and lithocholic acid. However, the levels of hyodeoxycholic acid and its 6β-isomer, of monohydroxy-monoketo-cholanoic acids, and of 3α, 6ξ, 7ξ-trihydroxy-cholanoic acid decreased. The data suggest that chitosan feeding affects the metabolism of intestinal bile acids in rats.     

Stereocomplex formation between enantiomeric poly(lactic acid). VIII. Complex fibers spun from mixed solution of poly(D-lactic acid) and poly(L-lactic acid)

To obtain poly(lactic acid) (PLA) complex fibers, spinning was performed by wet and dry methods from 5–10 g/dL chloroform solutions of poly(D-lactic acid) (PDLA) and poly(L-lactic), both with a viscosity-average molecular weight of 3 × 10⁵. The dope was extruded from a monohole nozzle into coagulation baths from ethanol and chloroform for wet spinning and into a drying column kept at 60°C for dry spinning. Scanning electron microscopic observation of the as-spun fibers showed that the surface of the wet-spun fiber had large basins with diameters of 50–100 μm and many pores with diameters from sub μm to 10 μm, whereas the surface of dry-spun fiber had a microporous structure with the pore diameter of 1–3 μm. The tensile strength of the wet-spun complex fiber was very low and could not be drawn at high temperatures, in contrast to the dry-spun fiber. The tensile strength of dry-spun complex fiber increased upon hot drawing and showed the tensile strength of 94 kg/mm² by drawing at 160°C to the draw ratio of 13. Differential scanning calorimetry revealed that the complex fibers contained both the stereocomplex crystallites (racemic crystallites) and the crystallites of the single polymers, PDLA and PLLA, regardless of the spinning methods. The ratio of the racemic crystallites to the single-polymer crystallites increased with the draw ratio of the complex fiber. © 1994 John Wiley & Sons, Inc.     

An Additional Insight into the Correlation between the Distribution Ratios and the Aqueous Acidity of the TODGA System

Abstract

Extraction of Eu(III) and Am(III) from HNO₃ into the organic solvents using N,N,N′,N′‐tetraoctyl‐diglycolamide (TODGA) was investigated in order to study the detailed extraction reaction. The chemical species: 1:2 for metal:TODGA complex is present in polar diluents. On the other hand, the metal complexes need three or more TODGA molecules to remain stable in non‐polar diluents. The HNO₃ concentration dependence on the distribution ratio suggests that HNO₃ participates in the metal extraction. Infrared spectra indicate that the carbonyl oxygen coordinates with Eu(III), and luminescence lifetimes suggest that there are no water molecules in the inner coordination sphere of the extracted Eu‐complex.     

Graphitization of carbon fibre/ glassy carbon composites

Carbon fibre/glassy carbon composites were prepared by aligning unidirectionally in furfuryl alcohol condensate the PAN-based carbon fibres treated at different temperatures and with different degrees of stretching. The graphitization of the composites was found to start at the boundary between the fibres and glassy carbon matrix, and to proceed into the matrix. This is considered to be due to the stress accumulation at the boundary caused by a large shrinkage of the matrix. The carbon fibres remain nongraphitized even after a heat-treatment at 2800°C. The composites heat-treated at high temperature (2800°C) are found to show a high overall degree of graphitization, unexpected on basis of the known graphitization behavior of carbon fibres and of glassy carbon, and a high degree of uniaxial preferred orientation of crystallites.     

Diffusion process of amino acids in polymer supports for solid‐phase peptide synthesis as studied by pulsed‐field‐gradient spin‐echo proton nuclear magnetic resonance

The diffusion coefficient (D) values of tert‐butyloxycarbonyl‐glycine, tert‐butyloxycarbonyl‐L ‐tryptophan, tert‐butyloxycarbonyl‐L ‐phenylalanine (Boc‐Phe), and 9‐fluorenylmethoxycarbonyl‐L ‐phenylalanine in Merrifield polystyrene (MPS) gels, poly(ethylene glycol)‐grafted polystyrene (PEG–PS) gels, and crosslinked ethoxylate acrylate (CLEAR) gels, as used in solid‐phase peptide synthesis, were determined by the pulsed‐field‐gradient spin‐echo ¹H‐NMR method. From these experimental results, it was found that the amino acids in MPS gels, PEG–PS gels, and CLEAR gels with N,N‐dimethylformamide‐d₇ (DMF‐d₇) as a solvent had multidiffusion components within a measurement timescale of 10 ms. The D value of Boc‐Phe in polystyrene gels (1% divinylbenzene crosslinked) with tetrahydrofuran‐d₈ was much larger than that in the same gels with DMF‐d₇. Furthermore, the required time in which an amino acid transferred from a reactive site to a reactive site was estimated, within which the solvents and amino acids in the polymer supports diffused in the swollen beads.© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 413–421, 2003     

Deterioration of diacylglycerol‐ and triacylglycerol‐rich oils during frying of potatoes

The stabilities of a commercial diacylglycerol‐rich oil (DAG) and a salad oil (TAG) that had been prepared from a mixture of rapeseed and soybean oils were compared while frying potatoes at 180 °C for 3 h. The representative chemical and physical characteristics of the oils were assessed before and after frying, together with the amount of volatile aldehydes in the exhaust of frying. Among the deterioration indications, the carbonyl value, polymer content, and residual polyunsaturated fatty acid content were similar and not significantly different between the TAG and DAG. On the other hand, the characteristics relating to free fatty acids, i.e. the acid value and emission of chemiluminescence at 100 °C, were greater and the smoke and flash points were lower in the DAG than in the TAG. An irritating odor was generated from the DAG after 1 h of frying and got stronger as frying continued. These results suggested that DAG more easily forms free fatty acids under frying conditions than TAG.     

Effect of steric hindrance on hydrogen‐bonding interaction between polyesters and natural polyphenol catechin

The phase behaviors for the blends of poly(3‐hydroxypropionate) (PHP), poly(L ‐lactide) (PLLA), poly(D ‐lactide) (PDLA), and poly(D,L ‐lactide) (PDLLA) with catechin were investigated by differential scanning calorimetry. In PLLA/catechin, PDLA/catechin, and PDLLA/catechin blends, two glass transitions were detected when the catechin content was ≥40 wt %, whereas in PHP/catechin blends only one glass transition was observed over the whole range of blend compositions. The former and the latter results should reflect the inhomogeneous and the homogeneous nature of the blends, respectively, in the amorphous phase. These different phase behaviors should arise from the differences in the chemical structures between PHP and PLLA/PDLA/PDLLA, which dominates the strength and the number of intermolecular hydrogen‐bonding interactions between the ester carbonyl groups of polyesters and the phenol groups of catechin. As detected by FTIR spectroscopy, in comparison with PHP, the steric hindrance of side‐chain methyl groups of PLLA, PDLA, and PDLLA might restrain the formation of hydrogen bonds between their ester carbonyl groups and the phenol hydroxyl groups of catechin, even weakening the strength of such hydrogen bonds. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3565–3573, 2004     

Deposition of Lead Phosphate by Lead-Tolerant Bacteria Isolated from Fresh Water near an Abandoned Mine

Specialist bacteria can synthesize nanoparticles from various metal ions in solution. Metal recovery with high efficiency can be achieved by metal-tolerant microorganisms that proliferate in a concentrated metal solution. In this study, we isolated bacteria (Pseudomonas sp. strain KKY-29) from a bacterial library collected from water near an abandoned mine in Komatsu City, Ishikawa Prefecture, Japan. KKY-29 was maintained in nutrient medium with lead acetate and synthesized hydrocerussite and pyromorphite nanoparticles inside the cell; KKY-29 also survived nanoparticle synthesis. Quantitative PCR analysis of genes related to phosphate metabolism showed that KKY-29 decomposed organic phosphorus to synthesize lead phosphate. KKY-29 also deposited various metal ions and synthesized metal nanoparticles when incubated in various metal salt solutions other than lead. The present study considers the development of biotechnology to recover lead as an economically valuable material.     

Efficient synthesis and magnetic properties of triphenylamine bearing three nitronylnitroxide radicals

Improved synthesis and reinvestigation of the magnetic properties of triphenylamine bearing three nitronylnitroxide radicals (1) were carried out. Single crystal X-ray crystallographic analysis of 1 established that its molecular shape had a C₃-symmetry. Our newly prepared 1 showed different physical properties from those of reported. SQUID measurements of 1 showed that each of the three spins of 1 behaved independently at room temperature. In contrast, the three spins coupled antiferromagnetically at lower temperature as low as ca. 1.8 K. These spin behaviors can be explained by a regular triangular antiferromagnetic model (J/k_B = ?3.3 K) and interpreted as a spin frustration system.