Effect of applied voltage frequency on swarming pulsive microdischarges in closed voids

The extinction of the partial discharge (PD) pulse has frequently been observed in an epoxy specimen with a closed void during voltage endurance tests using a CIGRE Method-II electrode. The individual discharge pulse becomes so small that the discharges cannot be detected by conventional pulse detection methods. Such discharges are known as “swarming pulsive microdischarges” (SPMD). In this paper, the SPMD characteristics are investigated by varying the frequency of the applied voltage from 0.1 to 240 Hz. As a result, the SPMD are found to occur less frequently as the frequency is lowered. To seek this cause, one-shot voltages were applied repeatedly at constant intervals. By varying the interval from 0.02 to 100 s, the PD off an electrically aged specimen was measured. It was revealed that the discharge magnitude increases as the interval becomes longer. The onset of SPMD was found to depend on the preceding discharge. The results explain the reason why swarming is harder to occur at lower frequency with a longer discharge interval. Hence, in the conventional pulse detection, it is useful to employ the very low frequency for diagnosis of machine insulation containing enclosed voids.     

Nonlinear phase distortion and its compensation in l.e.d. direct modulation

Differential phase distortion of the light-emitting diode is measured and analysed. An effective technique is proposed to compensate the d.p. distortion. An experimental result shows that 2.8° d.p. distortion has been reduced to within 1°.     

Wear of some F.C.C. metals during unlubricated sliding Part III: A mechanical aspect of wear

The relations between the size of wear fragments and the sliding velocity or normal load were studied from a mechanical point of view for the unlubricated wear of nickel. It was found that the size of mean wear fragments has a definite quantitative correlation with the thickness of the plastically deformed substrate layer, irrespective of the experimental conditions. The thickness of the deformed layer is determined by the actual forces working on real contact points, which are dependent on the dynamic properties of the specific sliding system. These mechanical factors govern wear-velocity and wear-normal load characteristics.     

Respiratory failure in acute pancreatitis: the role of free fatty acids

Hypertriglyceridemia has been noted in patients with acute pancreatitis and respiratory failure. Utilizing an isolated, perfused, canine pulmonary lobe, the effect of triglyceride infusion on pulmonary function was evaluated. When heparin was used to anticoagulate the perfusion circuit, the addition of triglyceride to the autologous blood perfusate resulted in massive weight gain (226 gm), intrapulmonary shunting (36%), and a marked drop in pulmonary compliance (congruent to 50%). Heparin activates lipoprotein lipase, and therefore some triglyceride in the perfusate was lipolyzed with a resultant increase in serum free fatty acids (FFAs) to 253 mumole/dl. When anticoagulation of the perfusion circuit was accomplished by defibrinogenation with Arvin, the addition of triglyceride to the autologous blood perfusate caused minimal weight gain (28 gm), no intrapulmonary shunting, and only a slight decrease in pulmonary compliance (22%). Arvin has no effect on lipoprotein lipase, and the FFA level in the perfusate remained normal (less than 70 mumole/dl). Thus it appears that FFA release secondary to the action of pulmonary lipoprotein lipase on blood triglyceride is the important pathogenic step in the induction of respiratory failure in this model.     

Characteristics of chlorophyll formation of the aerial microalga Coelastrella striolata var. multistriata and its application for environmental biomonitoring

The growth and ammonium uptake of the aerial microalga Coelastrella striolata var. multistriata, which was isolated from the surface of rocks, were characterized in this study. The specific growth rate of the alga was mu=0.3 d(-1), as calculated in the growth logarithmic phase. The algal cells were able to remove almost 100% of the ammonium ions from medium in 5 d, with the removal rate of ammonium-N being 0.4 mg/l/h. It was shown that the alga has a unique ability to be a reddish orange to green color depending on the nitrogen source concentration in the medium. Astaxanthin, adonixanthin, canthaxanthin, and beta-carotene were found in the reddish orange cells of the alga. The assessment of water pollution was attempted using this aerial microalga. When the reddish orange alga was incubated in the experimental medium with added ammonium-, nitrate-, or urea-N as a nitrogen source, an approximately linear relationship existed between the nitrogen concentration and chlorophyll formation. Using the chlorophyll formation of the alga, for example, it was possible to estimate spectrophotometrically the total nitrogen content in water collected from aquatic systems. Biofunctional materials for environmental biomonitoring using photosynthetic microorganisms are called green devices in this study.     

Development of coincidence transmission electron microscope. III. Incorporation with gamma-type imaging energy filter

We have developed a new analytical transmission electron microscope (TEM), called coincidence TEM, which, in principle, enables observation of elemental mapping images at a high signal-to-noise ratio. We have previously reported the successful observation of an elemental mapping image of a specimen, but over a very long period of time (168 h). To solve this inefficiency, we installed a gamma-type imaging energy filter in the coincidence TEM to remove the no-loss electrons, which are mainly transmitted electrons. This has enabled the intensity of the background signals in the coincidence measurement to be markedly reduced. The coincidence TEM with a gamma-type imaging energy filter allows the coincidence image to be observed in 3 h, thus, the measurement time is shortened by two orders of magnitude. Moreover, the use of a silicon drift detector (SDD) will shorten the measurement time.     

Simple and comprehensive two-dimensional reversed-phase HPLC using monolithic silica columns

Simple and comprehensive two-dimensional (2D)-HPLC was studied in a reversed-phase mode using monolithic silica columns for second-dimension (2nd-D) separation. Every fraction from the first column, 15 cm long (4.6-mm i.d.), packed with fluoroalkylsilyl-bonded (FR) silica particles, was subjected to the separation in the 2nd-D using one or two octadecylsilylated (C(18)) monolithic silica columns (4.6-mm i.d., 3 cm). Monolithic silica columns in the 2nd-D were eluted at a flow rate of up to 10 mL/min with separation time of 30 s that meets the fractionation every 15-30 s at the first dimension (1st-D) operated at a flow rate of 0.4-0.8 mL/min. Three cases were studied. (1) In the simplest scheme of 2D-HPLC, effluent of the 1st-D was directly loaded into an injector loop of 2nd-D HPLC for 28 s, and 2 s was allowed for injection. (2) Two six-port valves each having a sample loop were used to hold the effluent of the 1st-D alternately for 30 s for one 2nd-D column to effect comprehensive 2D-HPLC without the loss of 1st-D effluent. (3) Two monolithic silica columns were used for 2nd-D by using a switching valve and two sets of 2nd-D chromatographs separating each fraction of the 1st-D effluent with the two 2nd-D columns alternately. In this case, two columns of the same stationary phase (C(18)) or different phases, C(18) and (pentabromobenzyloxy)propylsilyl-bonded (PBB), could be employed at the 2nd-D, although the latter needed two complementary runs. The systems produced peak capacity of approximately 1000 in approximately 60 min in cases 1 and 2 and in approximately 30 min in case 3. The three stationary phases, FR, C(18), and PBB, showed widely different selectivity from each other, making 2D separations possible. The simple and comprehensive 2D-HPLC utilizes the stability and high efficiency at high linear velocities of monolithic silica columns.